MONTECH MKey Keyboard Shortcuts Directions Instructions
- June 15, 2024
- MONTECH
Table of Contents
MKey
Keyboard shortcuts directions
MKey Keyboard Shortcuts Directions
Scope of delivery (packaging content = Lieferumfang) + required tools
Packaging Content| 1. Keyboard x1
2. Manual x1
3. USB A to C
---|---
Required Tools| 1. Computer with Windows OS
2. USB-A Host at PC
Note on proper installation / commissioning
Ensure that the USB cable already insert into USB Host Tip: When connecting a
USB keyboard, the computer can be off or on during the installation. Connect
the USB keyboard plug into the USB ports on the back or front of your
computer. If using a USB hub, direct connection to the back of the computer is
recommended. For laptops, an external keyboard can be connected to one of the
USB ports, or a USB hub may be used if no ports are available. The keyboard
should be automatically detected and installed after connecting.
Advice on safe use
- Dust, dirt, and bacteria: Computer keyboards can harbor a significant amount of bacteria and dirt. Cleaning the keyboard helps remove dangerous bacteria, prevents stuck keys, and maintains proper functionality. Procedure for cleaning: Before cleaning, turn off the computer and unplug the USB. This prevents accidental key presses that could cause undesired tasks.Use compressed air to blow away dust and debris between the key caps. A vacuum cleaner can also be used, be cautious of loose “pop off” key being sucked up.
- No waterproof: If any liquid is spilled on the keyboard, immediately turn off the computer or disconnect the keyboard. Flip the keyboard upside down to prevent liquid from damaging the circuits, shake it over a surface that can be cleaned, and use a cloth to clean the keys. Leave the keyboard upside down for at least two days to dry before continuing to clean any remaining substances.
- Electric shock: Montech KEYBOARD is a DC 5V device, which reduces the risk of electric shock.
- Damage to the keyboard: Proper cleaning techniques and precautions for spills can help prevent damage to the keyboard.
Note on disposal
Please follow the WEEE / ROHS 2012/19/EU instructions for recycling
disposal.
Top/Bottom Case: ABS
Key Cap: PBT
PCB: FRP PCB
Switch Frame: Steel
manufacturer name
MONTECH / TELON TECHNOLOGY CO., LTD
manufacturer adress
22F., No. 63, Zhongxiao 3rd Rd., Linkou Dist., New Taipei City 244 , Taiwan
Product name / code (Manufacturer partnumber)
MKey87/ MKey105
Specification
| Model name | MKey105/MKey87 |
|---|---|
| Structure | Mechanical/Hot-Swappable |
| Switches | Gateron G pro 2.0 |
| Keycaps material | PBT |
| Printing Method | Dye-Sublimation |
| Full Size(100%) | Dimension(mm):44313641 Weight(g):1563 |
| TKL(80%) | Dimension(mm):36313641 Weight(g):1335 |
MKeyc
| Fn+Esc | Turn of all Lighting |
|---|---|
| Fn+F1 | Lighting Direction Control |
| Fn+F2 | Lighting Effect Speed UP_3 Levels |
| Fn+F3 | Lighting Effect Speed Down_3 Levels |
| Fn+F4 | Turn Off the Knob′s Light |
| Fn+F5 | Previous Track |
| Fn+F6 | Play/Pause |
| Fn+F7 | Stop |
| Fn+F8 | Next Track |
| Fn+F9 | Mute |
| Fn+F10 | Turn of Mic |
| Fn+F11 | Calculator |
| Fn+F12 | Boss Key! (Go back to Home page) |
| Fn+↑ | Increase Brightness |
| Fn+↓ | Decrease Brightness |
| Fn+← → | Change Lighting Color |
| Fn+C | Lighting mode |
| Fn+ | Windows Lock/Unlock |
| Fn+Shift+Esc | Long Press 3 Seconds to Reset to Factory Settings |
Rotary knob control:
Default: Volume control
Switch mode by pressing the knob.
In sequence of: Volume control, Lighting mode, Zoom in/out
Corresponding lighting to each mode:
Blue and White comet: Volume control (Lighting rotates clockwise)
Colorful RGB:Lighting mode (Lighting rotates clockwise)
Red and White comet: Zoom mode (Lighting rotates clockwise)
Lighting can be changed by using the rotary knob or Fn+C
MACRO
| Fn+Alt+0~9 | Long press for 3 seconds to start recording a Macro. |
|---|---|
| Fn+Alt+End | Long press for 1 second to end the recording or continue recording |
other keys.
Fn+Alt+Space| Long press for 3 seconds to do a factory reset.
Fn+Alt+0-9：Long press for 3 seconds to start recording a Marco.
Fn+Alt+End：Long press for 1 second to end the recording or continue recording
other keys.
Fn+Alt+SPACE：Long press for 3 seconds to do a factory reset.
Switch hot keys after finishing Macro recording
Switch to Profile 0
Switch to Profile 1
Switch to Profile 2
Switch to Profile 3……..
Programmable Macro keys