ONE STOP GARDENS 91495 Rolling Work Seat with Tool Tray Owner’s Manual
- June 6, 2024
- ONE STOP GARDENS
Table of Contents
**ONE STOP GARDENS 91495 Rolling Work Seat with Tool Tray Owner’s Manual
**
Save This Manual Keep this manual for the safety warnings and precautions,
assembly, operating, inspection, maintenance and cleaning procedures. Write
the product’s serial number in the back of the manual near the assembly
diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Warning
Read this material before using this product. Failure to do so can result
in serious injury. SAVE THIS MANUAL.
Specifications
Construction
|
Heavy-Duty Tube/Formed Steel w/Polypropylene Tray
---|---
Finish
|
Green Powder Coated
Wheels
|
Four 10″ Dia. Pneumatic Tires w/
Ball Bearing Wheels – 30 PSI
Seat Type
|
Bucket /Tractor Type
13-1/4″ L x 17″ W x 7-1/2″ H
Overall Dimension
|
33″ L x 17-1/2″ W x 23″ H
Tray Dimension
|
17″ L x 15-1/2″ W x 3″ D
Overall Weight
|
30 Lbs.
Max. Weight Capacity
|
300 lb. (seat)
5 lb. (tray)
IMPORTANT SAFETY INFORMATION
Assembly Precautions
- Assemble only according to these instructions. Improper assembly can create hazards
- Wear ANSI-approved safety goggles and heavy-duty work gloves during
- Keep assembly area clean and well lit.
- Keep bystanders out of the area during
- Do not assemble when tired or when under the influence of alcohol, drugs or medication.
- Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving Protective, electrically nonconductive clothes and nonskid footwear are recommended when working with this product. Wear restrictive hair covering to contain long hair.
- Weight capacity and other product capabilities apply to properly and completely assembled product
Use Precautions
-
This product is not a toy. Do not allow children to play with or near this item.
-
Use as intended Only.
-
Inspect before every use; do not use if parts are loose or damaged.
-
Do not exceed listed weight
Be aware of dynamic loading!
Sudden load movement may briefly create excess load causing product failure. -
Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
Assembly Instructions
**** Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product.
-
Assemble all parts on a smooth surface to avoid scratching. Sort and identify all parts.
Additional tools will be necessary to assemble the Rolling Work Seat. (Tools not included). -
Matching up all the predrilled holes, attach the Tray Bracket (2) to the Frame (1), the Tray (4) and the Reinforcing Plate (3) using the Screws (14), Small Washers (11), Lock Washers (12), and Small Nuts (15). Tighten hardware.
-
Slide both Axles (7) into the Frame (1). Slide the Wheel (9) (be sure the valve stem is facing out) and then a Large Washer (10) onto the Axle. Thread a Nylon Axle Nut (8) onto the end of the axle and tighten, leaving enough space to permit the wheel to turn freely. Repeat for all Wheels. See Figures A & B.
-
Be sure the Adjustment Lever (18) is screwed onto Seat Post (6). The Seat (5) is attached to the Seat Post (6) with four Tapered Bolts (16) and Flange Nuts (17). Twist Seat (5) and Seat Post (6) assembly into the Frame (1) clockwise. The threaded Post needs to be seen from below the Frame. Insert the Cotter Pin (11) through hole in the Post. Spread open the Cotter Pin (11). See Figures C & D.
-
Loosen Adjustment Lever (18) to set the desired height. Adjust Seat height by rotating the Seat in the Frame. Rotate Adjustment Lever (18) to lock seat post in position. The Adjustment Lever (18) will prevent the Seat from lowering beyond the desired height. Before each use, check the Seat (5) to make sure that the Seat is securely in place with all hardware tightened down.
WARNING! TO PREVENT SERIOUS INJURY:
Do not use the Rolling Work Seat on inclines.
Parts List and Diagram
Part
| Description| Qty
---|---|---
1
| Frame|
1
2
| Tray Bracket| 2
3| Reinforcing Plate|
2
4
| Tray| 1
5| Seat|
1
6
| Seat Post| 1
7| Axle|
2
8
| Nylon Axle Nut| 4
9| Wheel|
4
10
| Large Washer
(8 mm ID flat)
| 4
11| Cotter Pin|
1
12
| Small Washer| 4
13| Lock Washer|
4
14
| Screw| 4
15| Small Nut|
4
16
| Tapered Bolt| 4
17| Flange Nut|
4
18| Seat Adjustment
Lever (not shown)
|
1
For technical questions, please call 1-888-866-5797.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE
IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER
AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE
BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER
REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT
OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Record Serial Number Here
Note: If product has no serial number, record month and year of purchase
instead.
Note: Some parts are listed and shown for illustration purposes only, and
are not available individually as replacement parts. Specify UPC 792363914956
when ordering parts.
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet
high quality and durability standards, and warrants to the original purchaser
that this product is free from defects in materials and workmanship for the
period of 90 days from the date of purchase. This warranty does not apply to
damage due directly or indirectly, to misuse, abuse, negligence or accidents,
repairs or alterations outside our facilities, criminal activity, improper
installation, normal wear and tear, or to lack of maintenance. We shall in no
event be liable for death, injuries to persons or property, or for incidental,
contingent, special or consequential damages arising from the use of our
product. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation of exclusion may not apply to
you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us
with transportation charges prepaid. Proof of purchase date and an explanation
of the complaint must accompany the merchandise. If our inspection verifies
the defect, we will either repair or replace the product at our election or we
may elect to refund the purchase price if we cannot readily and quickly
provide you with a replacement. We will return repaired products at our
expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost
of returning the product.
This warranty gives you specific legal rights and you may also have other
rights which vary from state to state.
Visit our website at: http://www.harborfreight.com
Email our technical support at:
productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon
as possible.
Copyright© 2021 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described
herein.
Tools required for assembly and service may not be included.
