REXING DT2 Dual Channel 1080p Front And Rear Dash Cam User Manual
- June 1, 2024
- Rexing
Table of Contents
REXING DT2 Dual Channel 1080p Front And Rear Dash Cam
Product Information
Specifications
- Model: Rexing DT2 Dash Cam
- Warranty: 18-Month Limited Warranty
- Resolution: 1080 FHD
- Storage: Includes 32GB SD Card
- Additional Features: WDR Mode, G-Sensor, Parking Mode (requires Smart Hardwire Kit or Intelligent Hardwire Kit)
Product Usage Instructions
Package Contents
The package includes:
- Rexing DT2 Dash Cam
- Rear camera with rear camera cable
- Type-C Data Cable (for transferring files only)
- 3M Adhesive
- Cable Clips
- Car Charger
- Cable Management Tool
- User Manual
- 32GB SD Card
- Warning Sticker
- Electrostatic Sticker
Camera Overview
The Rexing DT2 Dash Cam features:
- 3″ LCD Screen
- Rear Camera Port
- USB-C Charging Port
- Micro SD Card Slot
- Front Camera with various control buttons for recording, settings, and playback
Get Started
Step 1: Installing Adhesive Mount
Place the 3M adhesive on the mount plate and orient it correctly to the roof and hood line of the vehicle.
Step 2: Installing the Electrostatic Stickers
2.1 Prepare Your Windshield
Cleanse your windshield with water or alcohol. Wipe it dry using a clean cloth.
2.2 Position the Sticker
Peel off the protective film from the electrostatic sticker. Attach it behind the rear-view mirror.
2.3 Secure the Mount and Camera
Remove the 3M tape from the mount. Fix both the mount and camera onto the electrostatic stickers.
Note: Handle components carefully for optimal performance.
FAQ
- How do I activate my 18-month warranty and claim a free gift?
- To activate your warranty and claim your free gift, visit https://www.rexingusa.com/productreg/ within 30 days of purchase.
- How can I activate the parking monitor feature?
- To activate the parking monitor feature, connect a Smart Hardwire Kit or an Intelligent Hardwire Kit to your dash cam.
The information in this manual is subject to change without notice. Rexing All Rights Reserved
Activate Your 18-Month Warranty & Choose Your FREE Gift!
Activate within 30 days of purchase to claim your free gift and extend your limited 12-month warranty to 18 months.
Scan The QR To Activate & Select Your Free Gift
Overview
Thank you for choosing REXING!
We hope you love your new products as much as we do. If you need assistance or have any suggestions to improve it, please contact us.
Our support team will respond to you as soon as possible. Always a surprise with Rexing
Check us out here
- https://www.facebook.com/rexingusa
- https://www.instagram.com/rexingdashcam
- https://www.rexingusa.com/support/registration
Package Contents
- Rexing DT2 Dash Cam
- Rear camera with rear camera cable
- Type-C Data Cable (for transferring files only)
- 3M Adhesive
- Cable Clips
- Car Charger
- Cable Management Tool
- Users Manual
- 32GB SD Card
- Warning Sticker
- Electrostatic Sticker
Camera Overview
- Recording Mode
- Recording (On)
- WDR Mode (On)
- G-Sensor Sensitivity Level
- Recording Time (Current Clip)
- Video Resolution
- Parking Mode (On)***
- Memory Card（Inserted)
- Battery Charging
- Plate Number
- Time
- Current Date Time
- MIC (ON)
- Exposure Value
- Loop Recording Time Interval
Please connect a Smart Hardwire Kit or an Intelligent Hardwire Kit to activate the parking monitor feature
Get Started
Step 1
Installing Adhesive Mount
Place the 3M adhesive on the mount plate and properly orient the mount piece to the roof and hood line of the vehicle.
Step 2
Installing the Electrostatic Stickers
Prepare Your Windshield
Thoroughly cleanse your windshield with either water or alcohol. Follow this by wiping it dry using a clean, dry cloth to ensure a spotless surface.
Position the Sticker
Next, carefully peel off the protective film from the electrostatic sticker. Attach the sticker to the windshield, ideally behind the rear-view mirror.
This position is recommended to avoid obstructing your view while you’re on the road.
Secure the Mount and Camera
Now, remove the 3M tape from the mount. Once done, you can proceed to fix both the mount and camera onto the previously positioned electrostatic stickers
Note:
Be sure to handle each component with care and follow the guidelines in their respective order. This is to ensure optimal performance of the sticker, the mount, and the camera.
Step 3
Mount the Rear Camera
Mount the rear camera as shown below. Use the included rear camera cable to
connect the rear camera to the front camera.
Step 4
Insert the Memory Card
The Rexing DT2 accepts Class 10/ UHS-1 or higher Micro SD memory cards up to
128GB. You will need to insert a memory card before recording. Before
inserting or removing a memory card, ensure you’ve powered down the device.
Gently push the memory card in until you hear a click, and allow the spring
release to push the card out.
Step 5
Power on the Camera and Format the Memory Card Power the camera by connecting
the charger to the car cigarette lighter and the camera.
The camera will shut down after 3 seconds when it’s disconnected from the power source and it should begin recording automatically the next time it is powered on. To ensure the DT2 records to your memory card properly and without error, we strongly recommend you to format the card within the camera when you’re using the dash cam for the first time.
Note:
Always remember backup important data stored on the memory card before formatting.
To format the memory card, first press the OK button to stop recording. Then press the MENU button twice to enter the Setup Settings. Use the and buttons and toggle to the Format. Press the OK button to confirm the format.
Basic Operation
Device Power
The device is automatically powered on when plugged into a 12V accessory socket or cigarette lighter and receives a charge (i.e.: the vehicle is started). To turn the device on manually, press and hold the OK button until the welcome screen appears. The camera will automatically start recording when powered on.
Menu Settings
Power the camera on, then press the OK button to stop recording. Press the
MENU button and switch between video mode, image mode and playback mode. Press
the MENU button once to enter the Video Settings, or press the MENU button
twice to enter the Setup Settings menu.
Video Recording
The camera will automatically start recording when the device receives a
charge. The LED lights and the red dot will blink when the device is
recording. Press the OK button to stop recording
Video Playback
To playback a video on the device, press the OK button to stop recording. Press and hold the MENU button twice to enter the Playback mode. Use the ****and buttons to toggle to the desired video. Press the OK button to play. During playback, use the OK (pause), (fast forward) and (rewind) buttons to control the video playback.
To playback a video by using an SD card reader, remove the memory card and insert it into an SD card adapter. Place the adapter in the computer
Parking Monitor (Parking Surveillance Mode)
A parking monitor provides surveillance on your parked vehicle. When the engine is off, the hardwire kit is used to provide continuous power and protect your car battery from being discharged.
Option 1: Vibration Detection
To enable the Parking Monitor, you’ll need to connect it with a Smart Hardwire Kit (sold separately).
This feature will allow the dash cam to switch to parking mode automatically if the vehicle’s engine turns off and switch back to the normal recording after the vehicle’s engine turns on.
Gravity Sensing Record:
Gravity Sensing detects significant or sudden movement (such as an impact or collision), and it will trigger an event recording. We suggest setting the “Gravity Sensing” to High sensitivity for Parking Mode Recording.
Note:
If you do not use the parking mode function, please change the Gravity Sensing sensitivity to low. Otherwise, the video will easily be locked and the video cannot be deleted by the loop recording function. This will cause the memory card to be full of locked videos and cause the recorder to fail to work normally. Please DO NOT ENABLE the Parking Monitor function in the settings of the dash cam WITHOUT connecting a smart hardwire kit. They may cause a malfunction.
Option 2: Motion Detection
To use this feature, you need to connect it with a Rexing Intelligent Hardwire Kit (sold separately). Make sure that the Parking Mode is turned off on your dash cam, otherwise it may cause a malfunction. Once the sensor has detected MOTIONS. The intelligent hardwire kit will power up the dash cam automatically and start recording until the MOTION is cleared. Please go to https://www.rexingusa.com/hwk-install/ to watch a video tutorial about the installation or scan the QR code below
Taking and Reviewing Photos
To take a photo, press OK button to stop recording. Press the MENU button once
to enter photo mode. Then press the OK button to take a photo. To view/delete
a photo, stop video recording and enter the Playback Mode. Toggle through the
videos and photos to the one you want to view/delete. Press the MENU button
once and toggle to the Delete option. Press the OK Button and select Delete
Current or Delete All.
Warranty & Support
The Rexing DT2 comes with a full 12-month warranty. If you register your product on our official site (https://www.rexingusa.com/support/registration), you can extend the warranty to 18 months.
Warranty
If you have any questions regarding your product, please do not hesitate to contact us at care@rexingusa.com, or call us at 877-740-8004. Queries are typically answered within 12-24 hours.
Support
Rexing is firmly committed to always improving our products, services, and user experience. If you have any thoughts on how we can do even better, we welcome your constructive feedback and suggestions.
Your opinion matters
Connect with us today at care@rexingusa.com Thank you for choosing Rexing!
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment
References
- Rexing USA | Your Roadside Eyewitness
- Login • Instagram
- Rexing Hardwire kit/Smart Hardwire kit/Intelligent Hardwire kit Installation with Fuse Adapter | Rexing USA
- ProductReg | Rexing USA
- Rexing Product Reg II | Rexing USA
- Rexing Product Reg II | Rexing USA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>