MONTECH Air X Series ARGB Case Starts Selling User Manual

MONTECH Air X Series ARGB Case Starts Selling

Product Information

• Product Name: AIR X SERIES
• Model: Air X ARGB
• Supported motherboard sizes: Mini-ITX, Micro-ATX, ATX, E-ATX
• Colors: Not specified
• Dimensions: Not specified
• Expansion Slots/PCI: Not specified
• Drive Bays: Not specified
• I/O Ports: Not specified
• Pre-installed fans: Not specified
• Positions for fans: Not specified
• Radiator support: Not specified
• Clearances: Not specified
• Dust filters: Not specified
• Power supply support: Not specified

Product Usage Instructions

ARGB Fans and Control Box:

The ARGB fans can be synchronized with the motherboard for controlling the ARGB lighting. There are two methods for controlling the lighting:

1. Using the LED button on the front panel:
   • Press and hold the LED button for 6 seconds to turn off the lighting.
2. Controlling the lighting through the motherboard:
   • Press the LED button for 3 seconds to enable motherboard control.
   • Note: The motherboard sync feature only works with 5V 3-pin connections. It will not work with old motherboards with 4-pin RGB or standard RGB +12V connections.

Removing the Side Window:

To remove the side window of the case, follow these steps:

1. Place the case side on a table or the floor.
2. Insert your hand into the bottom space between the front plate and the body.
3. Apply force to remove the panel from the case.

Removing the front panel:

To remove the front panel of the case, follow these steps:

1. Place the case side on a table or the floor.
2. Insert your hand into the bottom space between the front plate and the body.
3. Apply force to remove the panel from the case.

Removing the Side Panel:
To remove the side panel of the case, follow these steps: (Steps not mentioned in the manual)

Removing Dust Filters:
To remove the dust filters, follow these steps: (Steps not mentioned in the manual)

Installation of SSD on the Panel and Bracket / HDD Cage Position & Power Supply Support:

The installation process for SSDs and HDDs is not provided in the manual.

Graphics Card Compatibility:

• A: Mini ITX
• B: Micro ATX
• C: ATX
• D: E-ATX

If you have any further questions or need assistance, please contact our customer support:

Website: www.alza.co.uk/contact

Phone: +44 (0)203 514 4411

Importer: Alza.cz as, Jankovcova 1522/53, Holesovice, 170 00 Prague 7, www.alza.cz

WEEE:
Do not throw the product with household waste. Dispose of it properly through your retailer or use the selective garbage collection service provided by your city. Improper disposal may harm health or the environment.

SPECIFICATION

• Colours Black/White

• Dimensions 425×210×458 mm

• Motherboard Support E-ATX (305×330 mm)/ATX/Micro ATX/Mini ITX

• Expansion Slots/PCI 7

• Drive Bays 4× 2.5” SSD
  2× 3.5” HDD

• I/O Ports 1× USB 2.0, 2× USB 3.0, microphone, headset, LED button

• Pre-installed fans 2× Front 200 mm (ARGB)
  1× Rear 120mm (ARGB)

• Positions for fans Front: 3× 120 mm/3× 140 mm/2× 200 mm
  Rear: 1× 120 mm
  Top: 2× 120/140 mm

• Radiator support Front: 120/140/240/280/360 mm
  Rear: 120mm
  Top: 120/140/240mm

• Clearances VGA: 340 mm
  CPU: 163 mm

• Dust filters   Front, Top, Bottom

• Power supply support  Bottom mount, ATX

Screws and strips

ARGB Fans and Control Box

The ARGB fans have the capability to synchronize with the motherboard, offering two methods for controlling the ARGB lighting. The first method involves using the LED button located on the front panel. Pressing and holding the LED button for 6 seconds will turn off the lighting. The second method entails controlling the lighting through the motherboard by pressing the LED button for 3 seconds.

Caution: For motherboard sync, it can only work with 5V 3-pin. It will NOT work with old motherboard 4-pin RGB or standard RGB +12V.

Fan support

Radiator support

Removing the Side Window

To minimize the risk of glass breakage, lay the case down, remove the screws, and carefully slide the glass panel backwards.

Removing the Front Panel

To begin, place the case side on a table or the floor. Then, insert your hand into the bottom space between the front plate and the body. Finally, apply force to remove the panel from the case.

Removing the Side Panel

Removing Dust Filters

Installation of SSD on the Panel and Bracket / HDD Cage Position & Power Supply Support

Pull out the hard drive holder, lock the screws at the screw holes, and then return the hard drive holder to the original position.

Graphics Card Compatibility

CPU Cooling Compatibility

Motherboard Compatibility

www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz
This equipment is in compliance with the essential requirements and other relevant provisions of EU directives.

WEEE
Don’t throw with the household waste (garbage). The dangerous substances that they are likely to include may harm health or the environment. Make your retailer take back these products or use the selective collect of garbage proposed by your city.

References

• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza | Alza.co.uk
• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.cz
• alza.de
• alza.hu
• alza.sk

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>