CUR AQUA 011519 Curaqua’s Toilet Seat Instruction Manual
- June 4, 2024
- CUR AQUA
Table of Contents
011519 Curaqua’s Toilet Seat
Instruction Manual
TOILET SEAT
OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for
future reference, (Translation of the original instructions).
Jula reserves the right to make changes. For the latest version of operating
instructions, see www.jula.com
JULA AB, BOX 363, SE-532 24 SKARA
2022-01-03
© Jula AB
| | |
---|---|---|---
| | |
SAFETY INSTRUCTIONS
Read these instructions carefully before installing the toilet seat
SYMBOLS
Read
the operating instructions.
TECHNICAL SPECIFICATIONS
C-C spacing | 57-173 mm |
---|---|
Colour | White |
DESCRIPTION
CONTENTS
FIG. 1
INSTALLATION
-
Assemble the screw and hinges, then insert these into the mounting holes on the toilet
FIG. 2 -
Lift up the fitting and tighten the screw loosely.
FIG. 3 -
Check that the lock nut is correctly located and loosely tightened.
-
Click the seat into place on the hinges.
-
Close the lid and adjust to the desired position.
-
Then disconnect the seat.
FIG. 4 -
Tighten the screws and check that the nut is correctly located.
-
Press the protective covers onto the hinges.
-
Click the seat into place. FIG. 5
-
Your new toilet seat is now installed. FIG. 6
-
Press. FIG. 7
-
Lift. FIG. 8
NOTE:
- The lid and the seat must not be forced down, as this will damage the self-closing mechanism.
- The lid is not intended to be sat on and could break.
MAINTENANCE
CLEANING
- Use water and a mild non-abrasive detergent.
- Do not use strong chemicals.
- Do not use abrasive sponges etc.