MONTECH AIR 1000 Series Premium White ATX Mid Tower User Manual
- June 15, 2024
- MONTECH
Table of Contents
- AIR 1000 Series Premium White ATX Mid Tower
- Screws and strips
- Air 1000 ARGB Controller
- Fan support
- Radiator support
- Removing the Side Window
- Removing the Front Panel
- Removing Dust Filters
- Graphics Card Compatibility
- Motherboard Compatibility
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
AIR 1000 SERIES
User Manual
AIR 1000 Series Premium White ATX Mid Tower
| Colours | Black/White |
|---|---|
| Dimensions | 416x220x490 mm |
| Motherboard Support | ATX/Micro ATX/Mini ITX |
| Expansion Slots/PCI | 7 |
| Drive Bays | 4x 2.5″ SDD or 2x 3.5″ HDD 2x 2.5″ SSD |
| I/O Ports | lx USB 2.0, 2x USB 3.0, Microphone, Headset, LED button |
| Pre-installed fans | 3x Lite 120mm (high airflow fan) |
3x Silent 120mm (high airflow fan)
3x Premium 140mm/1x 120mm (ARGB fan)
Positions for fans| Front: 3x 120 mm/3x 140 mm Rear lx 120 mm
Inside: 2x 120 mm
Top: 2x 120/140 mm
Radiator support| Front: 120/140/240/280/360 mm Rear: 120 mm
Top: 120/140/240/280 mm
Clearances| VGA: 340 mm
CPU: 165 mm
Dust filters| Front, Top, Bottom
Power supply support| Bottom mount, ATX
Air 1000 Silent
To optimize noise reduction,
the top panel of the silent version is securely sealed, ensuring exceptional
silent performance. Consequently, the Silent version does not accommodate any
fans or radiators on its top section
Positions for fans| Front: 3× 120mm/3× 140mm
Rear: 1× 120mm
Inside: 2× 120mm
---|---
Radiator support| Front: 120/140/240/280/360 mm
Rear: 120 mm
Screws and strips
| ×3| Motherboard standoff tool
---|---|---
| ×33| Motherboard screw/2.5” SSD disk screw
| ×6| Power supply crew
| ×2| Velcro
| ×5| Cable tie
| ×1| Buzzer
| ×8| 3.5” HDD disk screw
Air 1000 ARGB Controller
| A | SATA (For power supply |
|---|---|
| B | 3 Pin (For motherboard |
| C | 4× 3 Pin (For ARGB fan |
| D | 2 Pin (For LED button |
RGB Control Guide: Short press
the reset button to change the RGB mode. Press the LED button for three
seconds to turn off the light. For motherboard control, please press the LED
button for five seconds after you entered the motherboard software.
Caution: For motherboard sync, it can only work with 5V 3-pin. It will
NOT work with old motherboard 4-pin RGB or standard RGB +12V.
Fan support
Radiator support
Removing the Side Window
After opening the glass door, take out the glass vertically upwards. 
Removing the Front Panel
The front panel of the AIR 1000 is designed with a convenient snap-on metal
pin assembly, allowing for easy removal by pulling it out with both hands.
Removing the Side Panel
Removing Dust Filters
Installation of SSD on the
Panel and Bracket / HDD Cage Position & Power Supply Support 
Pull out the hard drive holder, lock the screws at the screw
holes, and then return the hard drive holder to the original
position.
Graphics Card Compatibility
CPU Cooling
Compatibility
Motherboard Compatibility
www.alza.co.uk/kontakt
+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7,
www.alza.cz
This equipment is in compliance with the essential requirements and other
relevant provisions of EU directives.
WEEE
Don’t throw with the household waste (garbage). The dangerous substances that
they are likely to include may harm health or the environment. Make your
retailer take back these products or use the selective collect of garbage
proposed by your city.
References
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza | Alza.co.uk
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza.cz
- alza.de
- alza.hu
- alza.sk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>