kogan KASMKALMRMA SmarterHome Interconnected Smoke Alarm Remote Control User Guide

June 15, 2024
Kogan

User Guidekogan KASMKALMRMA SmarterHome Interconnected Smoke Alarm
Remote Control KOGAN SMARTERHOMEā„¢
INTERCONNECTED SMOKE ALARM
REMOTE CONTROL
KASMKALMRMA

OPERATION

Installing Batteries in the Remote Control

  1. Flip the remote control over and locate the battery compartment on the back.
    Slide or press the compartment cover following the arrows to open it.

  2. Insert x2 12V A23 batteries into the compartment, matching the orientation of the polarity (+ / -) as indicated. Close the compartment securely after insertion.

Pairing the Remote to the Smoke Alarms
To pair the remote to smoke alarms, press and hold the Test/Hush button on the primary unit until the indicator flashes 3 times then immediately release it.
The indicator will flash rapidly for 2 minutes while waiting for other devices to pair. If you need to end the pairing in advance, press the Test/Hush button again.
Press Test button on the remote control. If the pairing is successful, the Red indicator on the remote will flash twice.
If the products have been previously paired with other groups, it will exit directly after the Green indicator flashes 4 times. For a successful match, you should clear paired data on all units first.
Clearing paired data: Press and hold the Test/Hush button and wait for the Green indicator to flash 4 times, immediately release the button. If the paired data is cleared successfully, it will flash 3 times slowly and exit. Otherwise, repeat the above steps to clear.
Button Functions
Test button: Aim the remote at the smoke alarm you wish to test.
Press the test button, the smoke alarm will sound for 10-15 seconds.
Note: Do not press any other buttons during this time, instead wait 10-15 seconds until the alarm has stopped.
Hush button: If the smoke alarm has been triggered and you need to stop, aim the remote at the smoke alarm and press the hush button. Note: Hush function will only work when smoke alarms are triggered. If the smoke alarms are in the testing state, they cannot be silenced.

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals