VSYSTO H10 4CH HD 1080P Truck Dash Cam User Manual

VSYSTO H10 4CH HD 1080P Truck Dash Cam

Product Information

Specifications

• Display screen
• Microphone
• Card slot 1
• Card slot 2
• Host Bracket
• Speaker
• Camera Interface
• Power/GPS Interface
• Temperature Sensor
• GPS Module
• Power Cable

Description of Each Part

1. Display screen: The screen where you can view the recorded videos and menu settings.
2. Microphone: Captures audio during video recording.
3. Card slot 1: Slot for inserting an SD card for storage.
4. Card slot 2: Additional slot for inserting another SD card for storage.
5. Host Bracket: Bracket used to mount the dash cam.
6. Speaker: Outputs audio during playback.
7. Camera Interface: Interfaces for connecting cameras.
8. Power/GPS Interface: Interface for connecting power and GPS module.
9. Temperature Sensor: Sensor that measures the temperature.
10. GPS Module: Module that provides GPS data.
11. Power Cable: Cable for powering the dashcam.

Button Description

• MENU: Opens the menu setting interface.
• V1/V2: Switches display screen between front, ear, left, and right.
• OK: Controls video recording and playback functions, and confirms settings.
• POWER: Powers on/off the screen and the dash cam.

Menu Description

• After selecting a function, press OK to enter the corresponding mode. The icon becomes larger to indicate the selected function.
• In the recording mode, the display screen shows the date & time, microphone status, recording status, GPS information, altitude, atmospheric pressure, locked videos, camera screens, voltage, and speed.
• In the playback mode, use the arrow buttons to select the video file you want to play back. The display screen shows the front and rear camera screens, along with the corresponding file names, dates & times, and durations.

Product Usage Instructions

Recording Mode

1. Press the MENU button to open the menu setting interface.
2. Short press the V1/V2 button to switch between front, rear, left, and right display screens.
3. To start recording, short press the OK button. The recording will begin.
4. To stop recording, short press the OK button again.
5. During recording, you can lock a video by short pressing the + button.
6. To power on/off the screen, short press the POWER button.

Playback Mode

1. Press the MENU button to open the menu setting interface.
2. Short press the V1/V2 button to switch between front and rearcamera video files.
3. Use the arrow buttons to select the video file you want to play back.
4. Short press the OK button to play the selected video.

FAQ

• Q: How do I switch between front and rear camera video files during playback?
  A: In playback mode, short press the V1/V2 button once to switch between front and rear camera video files.

1. This product uses high-performance chips, provide high-definition video an d seamless dyna mic images. Support true 1080P HD video recording. Please read this manual carefully before u se and keep it properly, we ho p e t his product can meet  your needs and serve you for a long time!
2. Note : With the advancement of technology, the product structure and parameters will continue to be improved. If there are pictures or descriptions that do not match the actual product, please refer to the actual display of the product.

Description of Each Part

1. Display screen
2. Microphone
3. Open the menu settings
4. Switch screen
5. Page up/turn off sound record
6. Turn on/off video recording
7. Page down/Lock video
8. Power on/off screen
9. Microphone
10. Card slot 1
11. Card slot 2
12. Host Bracket
13. Speaker
14. Camera Interface
15. Camera Interface
16. Camera Interface
17. Power/GPS Interface
18. Camera Interface
19. Temperature Sensor
20. Camera
21. Camera
22. Camera
23. GPS Module
24. Power Cable
25. Camera

Button Description

Function : Open the menu setting interface
In standby mode, short press 【Menu】 button to open the menu setting interface.
Function: Switch display screen
In video recording interface, short press【V1/V2】button to switch between front / rear / left / right display screen.
Function1: Page up function
Page up function in menu setting and playback mode.
Function2: Turn on/off sound recording function
In the video recording mode or standby mode, short press【-】button to turn off the sound recording function. At this time, the microphone on the upper left of the screen turns into a forbidden icon, indicating that the function has been turned off. Short press again to turn on sound recording, the icon will show as enable sound recording.
Function3: Set the time, short press【-】button to increase the time setting.
Function1: Turn on/off video recording function
In standby mode, short press 【OK】 button to start recording, and short press 【OK】 button again to stop recording.
Function2: Video file play button.
In the file browsing mode, short press 【OK】 button to play the video.
Function3: Confirm button
In the setting/playback mode, short press【-】and【+】button to browse, then short press 【OK】 button to confirm.

Function1: Page down function
Page down function in menu setting and playback mode.
Function2: Lock video files
In the recording state, short press【+】button to lock the video being recorded.
Function 3: In standby mode, short press the【+】button to start recording and lock the recorded video.
Function4: Set the time, short press【+】button to reduce the time setting.
Function1: Power on/off screen function
In the power-on state, short press 【Power】 button to turn off screen, short press again to turn on screen. The camera is still recording video after the screen is turned off, which does not mean that the recorder is turned off.
Function2: Turn off the screen, then short press any button to turn on the screen.

Menu Description

1. After selecting, press to enter the video recording mode
2. The icon becomes larger to indicate that the function is selected

• Character description on the display screen in recording mode

1. After selecting, press to enter the playback mode
2. The icon becomes larger to indicate that the function is selected

• Press to select the video file you want to play back

In playback mode : Short press V1/V2 once to switch the playback directory of the front and rear cameras video files

1. Front camera recording file, file name identification : REC_ Current video recording date and time F.MOV
2. Rear camera recording file, file name identification : REC Current video recording date and time R.MOV

In playback mode : Short press V1/V2 once to switch the playback directory of the left and right cameras video files

1. Left camera recording file, file name identification : REC_ Current video recording date and time L.MOV

2. Right camera recording file, file name identification : REC_ Current video recording date and time R.MOV

3. After selecting, press to enter the setting mode

4. The icon becomes larger to indicate that the function is selected

1. After selecting, press  to enter format mode

2. The icon becomes larger to indicate that the function is selected;

3. Delete all files in SD card

4. After selecting, press   to enter the language select mode Recorder software version

5. The icon becomes larger to indicate that the function is selected

• Language Identification — Corresponding to the selected language text.
• The number of language options depends on the actual model.
• The specific functions are subject to the actual situation

Installation Guide

1. Turn off vehicle engine.
2. .Insert the memory card into the card slot of the recorder.
   • Please use a high-speed memory card (Class 10 or above) with a capacity of not less than 8GB, and the memory card 1/card 2 supports a maximum of 512GB.
3. Fix the recorder on the center console of the vehicle.
4. Freely install cameras and handle their cables.
   • Yellow line connection method : The yellow line of the side cameras are connected to the 12V positive pole of the corresponding turn signal, and the yellow line of the rear camera is connected to the 12V positive pole of the reversing light. If the yellow line is not connected, it will not affect the use of the recorder. It’s just that when reversing or turning, the display screen will not automatically switch to the corresponding camera image.
5. Insert the car charger into the vehicle cigarette lighter

Wireless Remote Control

Battery Replacement Guide

1. Use a screwdriver to remove the 4 screws at the bottom of the remote control and then lift off the protective cover.
2.  Push the coin cell battery out of the side with a screwdriver or fingernail.
3.  Install the new battery into the battery base according to the positive and negative poles. After ensuring that it can be used normally, close the protective cover and screw back the screws

GVP Operation Guide(Optional)

• Operating Systems Supported by GVP ：WinXP/7/8/10

• Installed Version

• Double-click setup.exe to start the installation. After the installation is complete, the desktop and start menu automatically generate shortcuts.

• Double-click the desktop shortcut icon , or click the start menu to select the corresponding option of GVP to open the software.

• Green Version

• Double-click to open the software interface icon

Interface Picture Example

When the mouse moves to the corresponding icon, there will be an operation prompt, please follow the prompt to operate (as shown in  the figure below)

Interface during Playback
Double-click the playback screen during playback to go full screen or exit full screen

• Supports Multiple Languages and Google Maps
• Click to set the player language and map

Product Specifications

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>