VSYSTO X10 10.1 Inch Monitor 4CH Truck Dash Cam with Sunshade User Manual

VSYSTO X10 10.1 Inch Monitor 4CH Truck Dash Cam with Sunshade

Product Appearance

This product uses high-performance chips and provides high-definition video and seamless dynamic images. Support true 720P HD video recording. please read this manual carefully before use and keep it properly, we hope this product can meet your needs and serve you for a long time!

Note:
With the advancement Of technology, the product structure and parameters will continue to be improved. If some pictures or descriptions do not match the actual product, please refer to the actual display Of the product.

Button Description

MENU

• Function 1: Open the menu setting interface
  In standby mode, short press [Menu] button to open the menu setting interface.

• Function 2: Enter playback
  In standby mode, long press (Menu) button to enter playback.

• Function 3: Go back to previous
  In the folder, file preview, and video playback interface, short press [The menu] button to return to go back to the previous.

V1/V2

• Function 1: Switch display screen
  In the video recording interface, short press the [VI/V2] button to switch between the front/ rear/left/right display screen.

• Function 2: Switch split screen mode
  In the video recording interface, long press the [VI/V21] button to switch to split screen mode.

• Function 3: Switch left and right camera display screen
  In the setting interface of the menu, short press the [VI/V21] button to switch the left and right camera screen

• Function 4: Quick go back
  In the folder, file preview, and video playback, short press the [VI/V2] button to quickly go back to the video recording interface.

• Function 1: Page down function
  Page down function in menu setting and playback mode.

• Function 2: Turn on/off the sound recording function
  In the video recording mode or standby mode, short press the (Down) button to turn Off the sound recording function. At this time, the microphone on the upper left of the screen turns into a forbidden icon, indicating that the function has been turned off. Short press again to turn on sound recording, and the icon will show as enable sound recording.

• Function 3: Switch file type.
  In the normal file preview mode, long press the [Down] button to switch to lock the video folder; long press the [Down] button again to go back to the normal video folder.

• Function 4: Lock/unlock video files
  In the video playback interface, long press the [Down] button to lock/unlock the video.

OK

• Function 1: Turn on/off video recording function
  In standby mode, short press the [0K] button to start recording, and short press the (0K) button again to stop recording.

• Function 2: File Play Button.
  In the file browsing mode, short press the [OK] button to play the video.

• Function 3: Confirm button
  In the setting/playback mode, short press the [Up] and [Down] buttons to browse, then short press the (0K) button to confirm.

• Function 4: “Quickly Delete” Popup
  In the playback interface, when the video playback is paused, long press the [0K] button, and a pop-up window will appear asking whether to delete it, then choose to delete the current video file.

+

• Function 1:Page up function
  Page up function in menu setting and playback mode.

• Function 2: Lock video function
  In the video playback interface, long press the (Down) button to lock/unlock the video.

POWER

• Function 1: Power on/off function
  • In the power-off state, press and hold the (Power] button for 2 seconds to turn on the power of the recorder, then it starts to work.
  • In the power-on state, press and hold the [Power] button for 2 seconds, the recorder will automatically save the video file and user settings, then shut down.
• Function 2: Turn on/off display function.
  Press the [Power] button in the power-on state, and the device will turn Off the display, click again to turn on the display.

Video Recording Interface

Playback (on DVR)

Playback Interface Introduction

Explanation of video files saved in DVR:

Wireless Remote Control

• Power Button: Turn on/off the screen display. Note: It does not turn off the recorder, it just turns off the screen.
• Back Button: Return to menu settings. Press the 0K button to pause recording, then press the Back button to switch to the menu settings. Press the back button again to return to the recording interface.
• Av1 Button: Switch to the left camera full-screen mode.
• Av2 Button: Switch to the right camera full-screen mode.
• Av3 Button: Switch to front camera full-screen mode.
• Av4 Button: Switch to rear camera full-screen mode.
• OK Button: Confirm; Start/Stop recording.
• Up Button: Move up; Lock/unlock video file.
• Down Button: Move down; Turn on/off sound recording.
• Left Button: Move left.
• Right Button: Move right.

Installation Guide

1. Turn off the vehicle engine.
2. Insert the memory card into the card slot of the recorder.
   • Please use a high-speed memory card (Class 10 or above) with a capacity of not less than 8G, and the memory card supports a maximum of 128GB.
3. Fix the recorder on the center console of the vehicle.
4. Freely install cameras and handle their cables.
   • Yellow line connection method: The yellow line of the side cameras is connected to the positive pole of the corresponding turn signal, and the yellow line of the rear camera is connected to the positive pole of the reversing light.
   • If the yellow line is not connected, it will not affect the use of the recorder. It’s just that when reversing or turning, the display screen will not automatically switch to the corresponding camera image.
5. Insert the car charger into the vehicle cigarette lighter.

Function Introduction

1. Loop Recording

   • If you select any one of the three ” 1/3/5″ minutes, when the memory card is full, the recorder will overwrite the earlier recorded images;
   • If you select “off”, it will save as a file every 5 minutes, and will not continue to record when the memory card is full.

2. Recording
   Choose to turn on/off sound recording when video recording.

3. Gravity sensor
   Set the G-sensor sensitivity, there are Off /Low/Medium/High options. The higher the sensitivity, the easier the G-sensor is to trigger.

4. License plate number
   In the settings interface, open the license plate number function, and you can edit your license plate number. Returning to the recording interface, the lower left corner of the display screen will display the set license plate number. At the same time, the video recorded also has the license plate number watermark.

   • This function is only suitable for license plate numbers in China and foreign countries whose license plate numbers are a combination of English letters and numbers. Some special license plate numbers are not supported.

5. Screen mirroring
   You can choose whether to enable the mirroring of the front/rear/left/right lens in the menu settings.

6. Channel delay

   • The yellow wire from the left/right camera is connected to the positive pole of the turn signal.
   • When you turn on the left turn signal, the left lens screen will be displayed in full screen on the recorder display. When the turn signal ends, the recorder will return to the previously set display mode.
   • The yellow wire from the rear camera is connected to the positive pole of the reverse light.
   • When you want to reverse, as long as you engage in reverse gear, the rear camera screen will be displayed in full screen on the recorder display. At the same time, the rear camera also has a reversing icon, which is more convenient for reversing.
   • If you set the channel delay time, after the turn signal ends, the recorder will delay the display time of the corresponding camera screen according to your setting, and then return to the previous display mode.
   • If the channel delay is disabled by default, the recorder will return to the previously set display mode immediately after the turn signal ends.

7. Split Screen mode
   There are 10 camera screen display modes. It can be selected through the menu settings or the VI/V2 buttons. Long press the VI/V2 button of the recorder to set your favorite camera screen mode. After saving the display mode you want, the system will automatically use that mode the next time you turn on the recorder. You don’t need to set it up yourself every time you turn it on.
   DISPLAY SWITCH
   Press “Split screen mode” to switch display mode:
   Press the VI/V2 button on the main unit or the AVI/AV2/AV3/AV4 button on the remote control to switch the full-screen mode:

8. Screen protector
   Set whether the recorder needs to turn off the display when recording. There are several selection modes of off / 30 seconds / 1 minute / 2 minutes. The default setting is off, at this time the display will be always on.

9. Backlight adjustment
   Set the recorder display brightness, there are three modes: High/Medium/Low, the default setting is medium.

10. Frequency
    Sets the frequency of the light source. The default is 50HZ, and 60HZ can also be selected.

11. Key sound
    Set whether the recorder needs the key sound when operating.

12. Language
    Set the language of different countries.

13. Date/Time

14. Set the date format and time.
    To effectively record the date and time of evidence collection of driving safety accidents, please set the correct time before using the machine.

15. Format
    Erase all data on the memory card.

16. Default setting
    Restore to factory settings.

17. Version
    The software number of this logger system.

18. One-button mute function

    • In the working state of the recorder, short press the [Down] button, and the microphone on the screen will turn into a forbidden icon, indicating that the video recording function has been turned off. At this time, the recorder only records the image but not the sound. Short press the [Down] button again, and the microphone on the screen will turn into a recording icon, indicating that the recording function is resumed.
    • After manual settings, it will be automatically saved by the system, and there is no need to set the mute function after powering it on again.

19. Recorded video file playback
    When the recorder is in the video recording interface, short press the [0K] button, after it pauses the recording, long press [Menu) button to enter the playback video mode, then select the desired video to play.

Product Specifications

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>