VSYSTO Black-S2C Wi-Fi Dash Camera Cars User Manual

S2C Dash Cam
User Manual

Notes for Using the Dash Cam

• This product is an auxiliary (vehicle driving recorder) product for safe driving. Any loss caused by malfunction, information loss or using this product is irrelevant to our company.
• This product is an auxiliary device for recording external images of vehicles. Due to the different driving environment and vehicle environment, some functions will not support. The unscheduled firmware upgrade in order to improve the product will change the performance of the product, and sometimes the camera will cannot record due to the environment, so the driving images recorded in this product is for reference only. The state of TF card will also lead to camera cannot record.
• Although this product can record and save the videos of accidents, it does not guarantee that all the accident videos can be recorded. Slight collision accidents can’tstart the collision sensor, so the video may not be recorded in the specialized folder.
• Be sure to disconnect the power supply when inserting or pulling out TF memory card.
• For the stable use of the product, it is recommended to format the TF card atleast once a week.
• Generally TF card has a service life.Long-term use of TF card may cause the data  to be unable to save. In this case, it is recommended to buy anew TF card touse. Ourcompany will not be liable for data destruction caused by the long-term use of TF card.
• Please do not install or operate this product while driving.
• This device may disturb the function of improperly protected medical equipment. If you have any question or are uncertain whether the medical equipmentcan shield external RF energy, please consult your doctor or medical equipment manufacturer.
• Please do not make this product subject to strong impact or vibration, so as notto damage the product and cause malfunction or unavailable.
• Please do not use it in an environment with excessive dust density, so as to prevent cameras and other parts from being contaminated with dust, which will affect the video effect.
• Please stop using this product before cleaning and maintenance.
• Please do not use chemical solvents or detergents to clean this product.
• Please do not disassemble or modify this product without authorization.
• The ambient temperature range for the normal use of this device’s function is -20 to 65 degrees Celsius. Exceeding this temperature range may lead to product failure, fire or explosion.
• Please use it within the scope permitted by law.
• Disclaimer: Tire pressure sensors may not fit all vehicle tires. Please consult your vehicle manual or a tire professional whether the tire pressure sensors are fit your car. If they affect your vehicle’s performance, driving, or insurance coverage, do not install  it!
• The manufacturer and distributor will not be responsible for damage due to improper installation and usage.

Packing List

After opening the package, please confirm whether the driving recorderis in good condition and the accessories are complete.

1. Main Unitx1
2. Camera x2
3. Car Chargerx1
4. Bracketx1
5. TF Card(Optional)x1
6. Wire Controllerx1

Product Appearance Diagram

Product Connection Diagram

▶With the advancement of technology, the product structure and parameters will continue to be improved. The pictures and texts in this book are for reference only. If there are pictures or descriptions that do not match the actual product, please refer to the  actual display of the product.

Images Information and Menu Description

1. After selecting, press to enter Video Mode.
2. The icon becomes larger to indicate that the  function is selected.

1. Character description on the display in video mode

1. After selecting, press to enter Playback Mode.
2. The icon becomes larger to indicate that the function is selected.

1. Press to select the video to playback
   Long press for 3 seconds in the Playback Mode to switch to the video  files list of front and rear camera
   1.Front camera video files name identification: REC_The year, month and time of current video F.MOV
   2. Rear camera video files name identification: REC_The year, month and time of current video R.MOV

2. After selecting, press to enter Setting Mode2. The icon becomes larger to indicate that the function is selected.
   

values of tire pressure
Rear camera mirror| On/Off
Protect level| G-sensor sensitivity level adjustment
Button sound| On/Off
Voice guide| On/Off
Format SD Card| Delete all videos in SD card
WiFi MODE| WiFi On/Off
System reset| Restore to the factory default settings
FW Version| Information about the current software version of the machine

1. After selecting, press to enter Language Choosing Mode.
2. The icon becomes larger to indicate that the function is selected.
   1、Language identification Corresponding to the selected language
   2.The number of language choices depends on the actual model!

W5 Wired Controller Operating Instructions

◆ Function operation

◆ Recorder Video Playback Operation
In the video recording interface, long press the OK button once to switch to the setting interface.
Use the up/down buttons to select the player icon. After selecting, short press the OK button once to enter the playback mode. Then select the video you want to play, and short press the OK button once to start the video. The default is the front camera video,  long press the up button to switch to the rear camera video file.

Auxiliary Display Mode

1. Long press the down button of the wire controller to enter the tire pressure monitoring interface in the auxiliary display mode

Mobile Phone APP Installation and Operation Instructions

WiFi APP is a mobile phone control software used with VSYSTO DVR device. This software is connected to the DVR device via Wi-Fi, it can directly preview and playback the video on the mobile phone, easily realize that viewing the camera documents on the  screen of mobile phone, setting or other operations. Subverting the control method of traditional cameras, bring you a new experience.

Scan the QR code above to download the latest APP from Google Play or APPStore. Or you can search “WiFi Camera’”on Google Play or APP Store to download and install it.

https://play.google.com/store/apps/details?id=com.sys.cardvr| https://itunes.apple.com/cn/app/wi-fi- camera/id1279724157
---|---

Conditions of use and product association:

1. Smart terminal with Android 5.0 or higher or Apple terminal.
2. Purchase a recorder terminal device that uses VSYSTO design scheme, and connect the mobile phone WiFi to the camera correctly.

DVR WiFi Default Name: DV_XXX
Default password: 1234567890

To ensure the normal use of APP functions, please update the APP to the latest version in time.

Installation Guide

◆Shock Absorption Camera Bracket

1. Put the”shock absorption ring” on the camera
   

2. Install the camera body on the bracket, tighten the screws to fix it after adjusting the proper angle.

◆Camera

During installation, it is recommended to install the extension cable first, and then connect the main unit and camera separately (so that the installationis easier). If the distance between the main unit and the camera is less than 0.5 meters, itis recommended not  to use the camera extension cable (please keep the camera extension cable for future needs).

Viewing the screen or smart phone screen via WiFi and adjust the bracket around to find a suitable horizontal view angle before fixed by double-sided foam tape

Install the bracket downwards, tear off the double-sided tape and paste it ina suitable position
(Adjust the position of the bracket toa satisfactory angle, and finally stabilize the cameras)

The bracket is installed upwards, after tearing off the double-sided adhesive, itis recommended to screw on the lens to stabilize the cameras

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>