VSYSTO V7M WiFi 3CH Truck Dash Cam User Manual

VSYSTO V7M WiFi 3CH Truck Dash Cam

Specifications

• Product Name : VSYSTO V7M Truck Dash Cam
• User Manual Version: V1.1
• Cameras : Left, Front, Right
• Waterproof Rating : Left and Right Camera – IP67, Front Camera and Recorder Host – Not waterproof
• Power Source : Super capacitors
• Display : HD screen

INTRODUCTION

Thank you very much for purchasing the VSYSTO V7M dash cam. Please read this manual carefully before use.

Safety Instructions

• In order to use this product safely, please confirm that you fully understand the following.
• WARNING : This section indicates that mishandling can have serious consequences.
• Note: This section indicates that improper handling may cause injury to the user or damage the product.

Button Description

Up Button

1. In the video recording state, short press the up button once to switch the camera mode.
2. In the video recording state, long press the up button to enter the emergency recording mode. The emergency recording locked video filename is: KEY-xxxx.
3. In the setting interface, short press the up button once to select the previous page.
4. In the video playback interface, short press the up button once to select the previous video.
5. When playing video, long press the up button to switch the video file of the front/left/right camera.

OK Button

1. In the video recording state, short press the OK button to pause recording.
2. In the pause state of recording, long press the OK button to enter the menu setting interface.
3. In the menu interface of recorder, select the recording icon and short press the OK button once. The recorder will exit the menu interface and return to the video recording interface.
4. In the menu interface of recorder, select the playback icon and short press the OK button once. The recorder will enter video playback interface.
5. In the menu interface of recorder, select the setting icon and short press the OK button once. The recorder will enter setting interface.
6.  In the menu interface of recorder, select the language selection icon and press the OK button once. The recorder will enter the language setting interface.
7. In the video playback interface, select the video you want to play, and short press OK button to play the video.
8.  In the language setting interface, select the language you need, and short press the OK button to complete the language setting.
9. In the setting interface, select the the function settings you want, and short press the OK button to complete the settings.
10. In the setting interface, long press the OK button to return to the previous interface.
11. In the video playback interface, long press the OK button to return to the previous interface.
12. In the language setting interface, long press the OK button to return to the previous interface.

Down Button

1. In the video recording state, short press the down button to switch the camera mode.
2. In the setting interface, short press the down button once to select the next page.
3. In the video playback mode, short press the down button once to select the next video.

Features

Replace conventional lithium batteries with super capacitors for longer life and safer.

1. HD display screen.
2.  Support battery voltage display.
3. Video can be recorded after inserting TF card.
4. Built-in WiFi, can view real-time video on the dedicated APP.

Standard Accessories

1. Black GND -Connect Ground(Ground refers to the negative pole of the iron sheet screw of the vehicle body.)
2. VCC – Connect Constant Power(Constant power refers to the fuse that has been powered on after the vehicle is turned off.)
3. ACC – Connect Key switch(ACC refers to the fuse that has power after starting the vehicle, but has no power after flameout.) ※ Only the smart power cable supports the parking monitoring function. The car charger power cable does not support the parking monitoring function

• If there is any change of specification and appearance due to improvement, we are not able to inform you in advance. Please understand.
• Please note that there are differences between the schematic diagram and the real object in the manual.
• Optional” mean it is not a standard configuration. Please refer to the product description on the platform you purchased!

Description of Each Part

1. Up Button
2. 2 OK Button
3. Down Button
4. Card Slot
5. Reset Button
6. Microphone
7. Camera Connector
8. Camera Connector
9. GPS Connector
10. Power Connector
11. Smart Power Cable
12. Car Charger Power Cable
13.  GPS Module
14. Camera
15. Camera
16. Camera
17. Camera Connector

TF Card

1. Please use the high-quality Class10 or above genuine TF card.
2. The recorder supports 16G-256G memory card.
3. If the memory card cannot save the file properly, please format it on the recorder.

Formatting will delete the data, please backup the card data before performing formatting.

1. Insert the card into the card slot as shown in the picture.
2.  When picking up the card, gently press the TF card and slowly release it after hearing “Da”.
3. Please pay attention to the direction of the gold finger on the TF card.

If it is inserted reversely, the SD card and recorder will be damaged.

Attention

1. The card used on other devices will be automatically formatted after being inserted into our DVR. Please back up the data.
2.  In the case of high frequency of use, it is recommended to format the memory card every two weeks.
3.  Please do not pull out the card in the recording state to avoid damaging the video file and recorder.

Specifications

Installation Guide

• The yellow line of the right camera is connected to the 12V positive pole on the right turn signal. When you turn on the right turn signal, the right camera image will be displayed in full screen on the recorder. It is convenient to observe the surrounding environment on the right.
• The yellow line of the left camera is connected to the 12V positive pole on the left turn signal. When you turn on the right turn signal, the right camera image will be displayed in full screen on the recorder. It is convenient to observe the surrounding environment on the left.

Host Fixed Installation Diagram

Installation suggestions

1. It is recommended to hang the recorder host on the windshield or stand on the center console.
2.  It is recommended that the front camera be installed in the car, which can help the driver observe the situation in front of or inside the car. The left and right cameras can be installed on the rearview mirrors on both sides of the car, which can help the driver observe the situation on both sides.
   Note: You can choose to rotate 180° to adjust the screen interface in the host menu.

Power on

After installing the recorder and inserting the SD card, insert the charger into the cigarette lighter. Start the car to start recording automatically.

Attention
This recorder uses the latest supercapacitor design to replace the traditional lithium battery design, supercapacitor will automatically charge and can save the last file after disconnecting the power.

Time Setting

• Pause recording after the recorder is turned on→Enter  Menu→Choose time setting→Press↑↓to adjust time→Press ok to save the settings

Manually Trigger Lock Video

• In the recording state, long press the up button, the recorder will enter the emergency lock mode, record a locked video and the front,left and right cameras capture a picture at the same time. The video file name is named after KEY-XXXXX. The locked video will not be overwritten by the normal recorded “REC-XXXXX” file. When the SD card video file exceeds 10 KEY-XXXXX videos, the system will delete the earliest KEY-XXXXX emergency video.

G-sensor trigger lock video

• In the recording state, if the G-sensor sensitivity is turned on, the video will be locked after the G-sensor is triggered by a collision and reaches the system preset level. And the locked video will not be overwritten by the normal recorded “REC-XXXXX”. The name of the locked video file is GSR-XXXXX. When the SD card video file exceeds 10 GSR-XXXXX videos, the system will delete the earliest emergency video of GSR-XXXXX.

Recording Mode

• Please format the SD card before inserting it. After inserting the SD card, turn on the power of the motorcycle, and the recorder starts to enter the normal loop recording mode. You can set 1/2/3/5 minutes to save a video in the menu. When the SD card is full, new video files will overwrite the oldest saved files. To prevent loss of important files, please backup important video files in time.
• In the recording state of the recorder, short press the OK button to pause the recording. Then long press the OK button, the recorder enters the system setting interface, use the up/down button to select the video to be played, and then short press the OK button to enter the playback mode. In playback mode, long press the up button to switch to view the video files saved by the front,left and right cameras. If you need to exit the playback mode, long press the OK button to return to the system setting interface. Then use the up/down button to select the recording icon, and then short press the OK button again to successfully return to the recording mode.

Screen Information and Menu Descriptions

1. .After selecting, press to enter recording mode.
2. The icon becomes larger to indicate that thefunction has been selected.

Description of characters on the display in recording mode

1.  After selecting, press OK to enter playback mode.
2. The icon becomes larger to indicate that the function has been selected.

• Press to select the video to playback

In playback mode: long pressfor 3 seconds to switch to view the list of video files saved by the  front,l eft and right cameras Front camera video files name identification: REC_ The year, month and time of current video F.MOV

• Right camera video files name identification: REC_ The year, month and time of current video R.MOV
• Left camera video files name identification: REC_ The year, month and time of current Video L.MOV

1. After selecting, press OK to enter setting mode.
2. The icon becomes larger to indicate that the function has been selected.

1.  After selecting, press OK to enter language selection mode.
2. The icon becomes larger to indicate that the function has been selected.
3. Language identification — corresponding to the selected language.
4. The number of language options depends on the actual model.

****The specific functions are subject to the actual product received.

Mobile Phone APP  Installation and Operation

• The APP is a mobile phone control software used with VSYSTO DVR device .This software is connected to the DVR device via Wi-Fi, it can directly preview and playback the video on the mobile phone,easily realize that viewing the camera documents on the screen of mobile phone setting or other operations. Subverting the control method of traditional cameras, bring you a new experience.

• Scan the QR code above to download the latest APP from Google Play and APP Store. Or you can search “WiFi  Camera” on Google Play or APP Store to download and install it. Conditions of use and product association:

1. 1. Smart terminal with Android 5.0 or higher or Apple terminal.
2. 2. Purchase are cord erterminal device that uses VSYSTO design scheme, and connect the mobile phone WiFi to the camera correctly.
   DVR WiFi Default Name: VSYSTO-V7M-XXXX To ensure the normal use of APP functions, please update the APP to the latest version in time.

Connection Steps

1. Turn on the recorder;  Default password: 1234567890
2.  Enter the WiFi setting interface of the phone, find the corresponding WiFi name, and enter the password to connect to WiFi;
3.  Open mobile APP, connect the recorder.

Synchronized Recorder Time

• After the mobile phone is connected to the WiFi of the recorder, open the APP. When it prompts “command successful”, it means that the time of the recorder and the time of the mobile phone have been synchronized with the mobile phone (as shown in the figure below).

Live Preview (Video / Photo)

• After connect the camera WiFi with mobile phone, open the APP and click “Connect Device” to enter video preview status. In video preview state you can control camera to take video or photo. Click to swtich different camera image. Click to full screen display(as shown in the figure below).

Browse Recorder Files

• ClickOnline browse the video files on recorder memory card(as shown in the figure below).

Playback Recrder Files
Browsing the recorder file interface in the “Online” option, click the file you want to playback .Click the upper left corner to switch the different camera file, means the right camera, L means the left camera.

Download or Delete Recorder Files

• In the “Online” browsing recorder file interface, clic EDk IT to select the file you want to download or delete, and then click “Save” or “Delete” below as needed (as shown in the figure below).
• Video File Name
• REC-XXXX— Normal recorded videos
• GSR-XXXX— Emergency recorded videos
• KEY-XXXX— Emergency recorded videos

Local Files Management

• Click to enter the browsing interface of local files to replay/delete the files stored in the mobile phone, and the operation is similar to the online interface

Recorder Parameter Setting

• Click Setting to enter the recorder parameter setting interface, and you can set some parameters of the recorder in the mobile APP.
  SSID Setting is the WiFi name and password for setting the recorder (as shown in the picture below).

• If you need to view the video track, you can save the downloaded video in the Local of APP. Then switch the phone to a network that can access the Internet, click to play the video, and the track of your driving will be displayed below the video. The default map of the APP is Baidu Map. If you need Google Map, please change Baidu Map to Google Map in the APP settings interface.

• When you play a video on the mobile APP to view the driving track, you can only view the video of a single camera (front/left/right), and cannot play multiple cameras at the same time.

Wireless Remotes Crooner collimate Control

1. Short press the red button once to switch to the full screen of the left camera 1
2. Double-clicking either of the two buttons will trigger emergency lock mode. The front, left and right cameras start recording emergency video, while capturing a picture. While recording an emergency video, double-clicking the button again cannot trigger lock mode repeatedly. Only when the last emergency video recording is completed, double-clicking again can trigger. The video file name is named after KEY-XXXX. The locked video will not be overwritten by the normal recorded “REC-XXXX” file.

Battery Replacement Guide

1. Use a screwdriver to remove the 4 screws at the bottom of the remote control, and then lift off the protective cover.
2. Push the coin cell battery out of the side with a screwdriver or fingernail.|
3. Install the new battery into the battery base according to the positive and negative poles .After ensuring that it can be used normally that it can be used normally, close the protective cover and screw back the screws.

GVP Operation Guide (Optional)

• Operating Systems Supported by GVPWinXP/7/8/10 Installed Version
• Double-clicksetup.exe to start the installation. After the installation is complete, the desktop and start menu automatically generate shortcuts.

Initial Interface

• When the mouse moves to the corresponding icon,t here will be an operation prompt, please follow the prompt to operate (as shown in the figure below).

Interface during Playback

• During playback, double-click the front camera or rear camera image, the full screen of the camera will be displayed. Double-click again to exit full screen.

Note : Due to the limitation of the software system, the video of the left camera cannot be played when viewing the track on the computer. Only the video from the front camera and the right camera can be viewed at the same time.
TS format video does not support playing driving track on the computer.

Playback Interface
Supports Multiple Languages and Google Maps Click to set the player language and map

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>