VSYSTO F9D 4 Inch Screen WiFi Motorcycle Dash Cam User Manual

VSYSTO F9D 4 Inch Screen WiFi Motorcycle Dash Cam

Packing List

After opening the package, please confirm whether the driving recorder is in good condition and the accessories are complete.

1. Dash Cam Main Unit*1
2. Camera *2
3. Power Cable*1
4. USB Test Cable*1
5. Tie*8
6. Bracket*1
7. Wire Controller*1
8. GPS Module*1(Optional)
9. Memory Card x 1(Optional)
10. Tire Pressure Sensors x 2 (Optional)

“Optional” mean it is not a standard configuration. Please refer to the product description on the platform you purchased!

Product Appearance Diagram

How to use

1. Quick Test and Installation
   Please refer to the “Quick Installation Guide”.

2. Insert the Memory Card
   Insert the memory card into the card slot until you hear “Da”. If you want to take out the card, gently press the memory card and slowly release it after hearing “Da”.

Tips：

Please insert the memory card in the correct direction.
※Please do not pull out or insert the card when it is turned on to avoid damaging the video file and recorder.
※Please use the high speed Class 10 or above genuine card.
※Please format the memory card regularly to keep it in good condition.

Power on/off
After the recorder is properly installed, when you turn on the motorcycle power with the key, the recorder turns on. Turn off the motorcycle power, the recorder turns off.

Video Recording

1. Normal Recording Mode
   After the motorcycle power is turned on, the recorder will automatically start recording, and the LED indicator on the remote controller will slowly flash. When the motorcycle power is off, the recorder will automatically stop recording(If the smart power cable is configured, there is no vibration within 5 minutes after the motorcycle power is turned off, the recorder will shut down. Or long press the up button on the wired remote controller for 3 seconds to shut down the recorder).
   Loop Recording: The recorder will save a file after recording for a period of time (the default setting is 3 minutes). When the memory card is full, the system will delete the oldest file. You can manually set the time of video recording in APP. 1/2/3/5 minutes can be set, and front and rear camera files are saved in F and R folders respectively. The normal recorded video file is named “REC-xxxx”.

2. Emergency Recording Mode
   G-Sensor emergency recording mode: When the motorcycle collides with other vehicles or the vibration is strong, the built-in G-Sensor will automatically activate the emergency recording mode. The LED indicator on the remote controller flashes rapidly. The emergency video file is named “GSR xxxx”. You can set the sensor sensitivity level in the menu or APP. The higher the sensitivity, the easier to trigger G-Sensor.
   Manual emergency recording mode: When the recorder is recording, short press OK button of wired remote controller to lock the current recorded video, and the front and rear cameras will capture a photo at the same time. The manually locked video file is named “KEY xxxx”.

Tips：

※If the memory card is not inserted or is faulty, the video cannot be saved.
※”KEY” and “GSR” emergency video files can be saved 10 each. After more than 10, the
system will automatically delete the earliest one.

Mobile Phone APP Installation and Operation

The APP is a mobile phone control software used with VSYSTO DVR device. This software is connected to the DVR device via Wi-Fi, it can directly preview and playback the video on the mobile phone, easily realize that viewing the camera documents on the screen of mobile phone, setting or other operations. Subverting the control method of traditional cameras, bring you a new experience.

Method 1: Scan the corresponding QR code to download the latest APP from software download link of your browser.
Method 2: You can search “VSYSTO” on Google Play or APP Store to download and install it.
DVR WiFi Default Name: F9_XXXX
Default password: 1234567890

Connection Steps:

1. Turn on the recorder
2. Enter the WiFi setting interface of the phone, find the corresponding WiFi name, and enter the password to connect to WiFi
3. Open mobile APP, connect the recorder

Tips:

※If “No network connection” is displayed when connecting to WiFi, please turn off the mobile data network first, and then connect to the recorder WiFi according to the steps. If the prompt “Current WLAN is unavailable, whether to switch to another network?” appears, you must click “No”.

※After entering the APP, the recorder will pause recording. Please click the red recording button on the APP to start recording. After exiting the APP, the recorder will start recording in 30 seconds.
※You don’t need to connect to WiFi for daily riding. Connect when you need to watch the video.
※In case of connection failure, please contact customer service.

APP Setting Interface

※Pause recording video and then set it; It is recommended to set Level 0 or Level 1 for GST (G-sensor sensitivity). Do not set it too high.

Video File Format

W5T Wire Controller Operating Instructions

Function operation

Images Information and Menu Description

1. After selecting, press [OK] to enter Video Mode.
2. The icon becomes larger to indicate that the function is selected.

1. After selecting, press [OK] to enter Playback Mode.
2. The icon becomes larger to indicate that the function is selected.

1. After selecting, press [OK] to enter Setting Mode.
2. The icon becomes larger to indicate that the function is selected.

1. After selecting, press [OK] to enter Language Choosing Mode.
2. The icon be comes larger to indicate that the function is selected.

1. Character description on the display in recording mode:

1. Press  to select the video to playback.

Long press for 3 seconds in the Playback Mode to switch to the video files list of front and rear camera.

1. Front camera video files name identification: REC_ The year, month and time of current video F.MOV
2. Rear camera video files name identification: REC_ The year, month and time of current video R.MOV

min/3min
5.Parking monitoring| On/Off
6.Parking monitoring sensitivity| Set the vibration sensitivity when parking
7.Recording Time After Flameout| Set recording time after flameout
8.Date format| 3 options YYYY MM DD/MM DD YYYY/DD MM YYYY
9.Clock setting| Day&Time
10.Time zone selection| Time zone selection around the world
11.Date watermark| Whether the recorded video needs date watermark display and other options
12.Speed watermark| Whether it is necessary to turn on/off the driving speed display when playing video on the computer or app
13.Overspeed alarm| Set the overspeed alarm value. When the driving speed exceeds the preset value, the recorder will issue an alarm prompt.
14.GPS status| Display the current number of satellites, longitude, latitude and other information
15.Unit system| Set the speed and temperature unit selection displayed when driving
16.Tire pressure function(Optional)| On/Off
17.Tire pressure unit(Optional)| 2 unit options (bar/psi)
18.Tire pressure alarm sound(Optional)| On/Off
19.Tire pressure alarm threshold(Optional)| Set the alarm sound for the lowest and highest values of tire
20.Rear camera mirror| Whether mirror selection is required for the rear camera display
21.Protect Level| G-Sensor sensitivity level adjustment
22.Button sound| On/Off
23.Voice prompt| On/Off
24.System reset| Restore to the factory default settings
25.WiFi mode| On/Off
26.Format SD card| Delete all videos from the memory card
27.Operation guide| Introduce the operation method of the button function of the wire controller
28.FW version| Information about the current software version of the machine

1. Language identification — Corresponding to the selected language.
2. The number of language choices depends on the actual model.

Auxiliary Display Mode

1. Long press the down button of the wire controller to enter the auxiliary display mode, and the driving speed is displayed on the first interface.
   

2. Short press the up button again to enter the tire pressure monitoring interface(optional).
   

3. Short press the up button again to enter the battery power display interface
   

4. Short press the up button again to enter the GPS information interface.
   

5. Short press the up again to enter the current mileage short-term memory interface.
   

6. Short press the up again to enter the year, month, and day interface.
   

Tips:

※Speed, short-term memory, and location functions require GPS support.
※Battery voltage display requires parking monitoring ACC power cable support.

Installation Guide

Quick Test

1. Connect the front and rear cameras to the host of the recorder.

2. Find the USB test cable from the accessories and connect the recorder with a 5V 2A power bank or USB charger.
   After the recorder is turned on, test the function of the recorder.

3. After the test shows that the recorder is normal, you can install it.
   

 If the output voltage exceeds 5V, the recorder may be burnt.

Camera Bracket

Install the camera body on the bracket, and tighten the screws to fix it after adjusting the proper angle.

Camera

Install Power Cable

ACC Power Cable Connection Method: The red wire is connected to the positive pole of the motorcycle battery, the black wire is connected to the negative pole, and the yellow wire is connected to the positive pole of motorcycle key control (12V ACC power source).

Tips：

The power cords configured for different models are different. Please refer to the products actually purchased.
※Test is required after connection. After the motorcycle power is turned on, the recorder will turn on automatically. After the motorcycle flameout, the recorder is turned off. If you do not know the circuit of the motorcycle, it is recommended to find a professional person to install it.

Notes

• This product is an auxiliary (vehicle driving recorder) product for safe driving. Any loss caused by malfunction, information loss or using this product is irrelevant to our company.
• This product is an auxiliary device for recording external images of vehicles. Due to the different driving environment and vehicle environment, some functions will not support. The unscheduled firmware upgrade in order to improve the product will change the performance of the product, and sometimes the camera will cannot record due to the environment, so the driving images recorded in this product is for reference only. The state of memory card will also lead to camera cannot record.
• Although this product can record and save the videos of accidents, it does not guarantee that all the accident videos can be recorded. Slight collision accidents can’t start the collision sensor, so the video may not be recorded in the specialized folder.
• Be sure to disconnect the power supply when inserting or pulling out memory card. For the stable use of the product, it is recommended to format the memory card twice a week.
• Generally memory card has a service life. Long-term use of memory card may cause the new data to be unable to save. In this case, it is recommended to buy a new memory card to use. Our company will not be liable for data destruction caused by the long-term use of memory card.
• Do not use high-pressure water gun or chemical solvent to clean the host, camera, power module and other parts (otherwise, no warranty will be given).
• Please do not use it in an environment with excessive dust density, so as to prevent cameras and other parts from being contaminated with dust, which will affect the video effect.
• Do not twist cables or cable connector during installation, and keep the recorder host and wires away from high-pressure areas.
• Please replace the spark plug with a spark plug with appropriate R value if there is interference in some motorcycle models.
• Do not disassemble, modify or repair this equipment by yourself. If the recorder fails due to this, we will not provide after-sales service.
• Some pictures, functions and specifications may change due to product or software upgrading. Please understand that we cannot notify you separately.
• For your safety, please do not install or operate this product while driving. Please use it within the scope permitted by law
• Disclaimer: Tire pressure sensors may not fit all vehicle tires. Please consult your vehicle manual or a tire professional whether the tire pressure sensors are fit your car. If they affect your vehicle’s performance, driving, or insurance coverage, do not install it!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>