wiiyii G5 GPS Speed Meter Instructions

wiiyii G5 GPS Speed Meter

Product Information

Specifications

• Product Name : GPS Speed meter G5
• Working Voltage : 5V
• Power Supply : Voltage higher than 5V is forbidden

Display Functions

• Decorative Icon
• Multifunctional Display Area
• Compass : W (West)
• Satellite Icon
• Compass Angle
• Compass : N (North)
• Speed Unit : KM/H (kilometers), MPH (miles)
• Compass : E (East)
• Driving Mileage
• Fatigue Driving Alarm
• Compass : S (South)

Wave Button Functions

• Short Press In : Confirm the option after entering the setting menu
• Long Press In: Enter the setting, after adjusting, press vertically for 2 seconds to save and exit
• Push Left : Switch display mode, move options after entering setting
• Long Push Left : Push left for 2 seconds to turn off the buzzer alarm, do it again to turn on
• Push Right: Switch between concise mode and standard mode, move option after entering setting

Setting Mode
To enter the setting mode, long press in the wave button. Press right to choose the menu, and short press in to confirm. Once finishing the setting, long press in the wave button to exit.

Function Adjustment Menu

displays 100
KM/H and HUD displays 105 KM/H, adjust the parameter value to 102
(107-5).
Over Speed Alarm| HUD will give an alarm when the vehicle speed reaches the set
value.| 150| 30-250| Adjust according to desired over speed alarm value.
Fatigue Driving Alarm| HUD will give a fatigue driving alarm each set number of hours.| 4.0| 1.0-8.0| Adjust according to desired fatigue driving alarm
interval.
Brightness Sensitivity Adjustment| 0=Automatic adjustment, 1-11=Manual adjustment (1=darkest, 11=brightest)| 0| 0-11| Adjust according to desired brightness sensitivity.
Speed Unit| 0=KM/H (kilometers), 1=MPH (miles)| 0| 0-1| Choose the desired speed unit.
Factory Reset| Default=0, 1=Long press in for 3 seconds to save and exit| 0| 0-1| Perform a factory reset if needed.

Product Usage Instructions

Troubleshooting

1. The screen without any display, and no power
   Check whether the USB cable is damaged. Replace the USB cable for testing. Prohibit the use of voltage higher than 5V for power supply.

2. Without car speed
   After HUD power-on, the satellite icon flashes to start finding the satellite. Please drive the car on the road. It will work after the satellite icon stops flashing.

3. Inaccurate speed
   

   • First, check if the speed unit is correct. The speed unit includes KM/H and MPH. Refer to the setting to switch the unit.
   • The car manufacturers usually make the dashboard speed 5-7% higher than the ECU. The international standard is based on satellite data. If the dashboard shows 100 and the device shows 105, change the default value to 102.

4. Driving direction display error
   After the vehicle speed exceeds 5KM/H, the direction can be displayed normally.

5. Speed is still displayed after the car stops
   Under the underground parking lot, tunnel, or under the overpass, there will be unstable satellite drift when there is an obstruction.

6. Turn off the buzzer
   Push left for 2 seconds to turn off the buzzer. Do it again to turn on.

Frequently Asked Questions (FAQ)

• Can I use a power supply with a voltage higher than 5V?
  No, it is forbidden to use a voltage higher than 5V for power supply.

• How do I enter the setting mode?
  Long press in the wave button to enter the setting mode.

• How do I adjust the settings?
  Press right to choose the menu. Short press in the wave button to confirm options. Use push left and long push left to navigat  and adjust options. Press vertically for 2 seconds to save and exit after adjusting.

• How do I perform a factory reset?
  Long press in the wave button for 3 seconds to perform a factory reset.

GPS Speed meter:G5

Warning: This product working voltage is 5V, and it is forbidden to use a voltage higher than 5V for power supply.

Display

1. Decorative icon
2. Multifunctional display area
3. Compass: W (West)
4. Satellite icon
5. Compass angle
6. Compass: N (North)
7. Speed unit: KM/H (kilometers) MPH (miles)
8. Compass: E (East)
9. Driving mileage
10. Fatigue driving alarm
11. Compass: S (South)

Wave button function

1. Short press in : confirm the option after entering the setting menu
2. long press in : enter the setting, after adjusting, press vertically for 2 seconds to save and exit
3. Push left : Switch display mode, move options after entering setting
4. Long push left : push left for 2 seconds to turn off the buzzer alarm, do it again to turn on
5. Push right : switch between concise mode and standard mode, move option after entering setting

Enter setting mode
Long press in to enter into the setting mode, press right to choose the menu, and short press in to confirm. Once finishing the setting, long press in to exit.

Troubleshooting

1. The screen without any display, and no power
   Check whether the USB cable is damaged, replace the USB cable for testing, and prohibit the use of voltage higher than 5V for power supply

2. Without car speed
   After HUD power-on, the satellite icon flashes will start to find the satellite. Please driving the car to the road. It will work after it stops flashing

3. Inaccurate speed

   • First check the speed unit is correct or not, the speed unit including KM/H and MPH, please refer to the setting to switch the unit.
   • The car manufacturers usually make the dashboard speed 5-7% higher than the ECU. The international standard is based on satellite data.
     (if the dashboard shows 100, and the device shows the 105, change the default value at 102)

4. Driving direction display error
   After the vehicle speed exceeds 5KM / H, the direction can be displayed normally.

5. Speed is still displayed after the car stops
   Under the underground parking lot, tunnel, under the overpass, there will be unstable satellite drift when there is obstruction.

6. Turn off the buzzer
   Push left for 2 seconds to turn off the buzzer, do it again to turn on.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>