BOYALINK Wireless Lavalier Lapel Microphone User Manual

BOYALINK
User Manual

BOYALINK Wireless Lavalier Lapel Microphone

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.
✉ www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Cautions

• Non-professional teardown is strictly prohibited.
• Please keep it away from heat sources such as radiators or spotlights.
• Do not remove the battery without professional’s help.
• Please clean the device with only a soft, dry cloth.
• When using and storing, please keep away from the dust and moisture.
• For the best pick-up pattern, do not hold your hand against the microphone capsule cover.

General Introduction

The BOYALINK is an ultra-compact and portable 2.4GHz wireless microphone system, compatible with cameras, smartphones, tablets, computers, and more. It features automatic pairing and selectable noise cancellation, delivering broadcast-quality sound
with remarkable ease of use. The BOYALINK is ideal for content creation, live streaming, vlogging, mobile journalism, and much more.
There are three different adapters included in the kit: 3.5mm TRS, USB-C and iOS Lightning cable. The receiver has a USB-C charging port that supports charging and powering the device while using it with a USB-C/iOS Lightning adapter.
The included charging case allows you to charge the transmitter and receiver anywhere, making the BOYALINK kit easy to carry.

Features

• Available in 48kHz HD audio when noise cancellation is enabled.
• Wide-range 20-20,000Hz frequency response – delivering exceptionally high-quality sound.
• Built-in rechargeable lithium-ion battery provides 10+ hours of recording.
• Switchable mono/stereo output.
• 3.5mm TRS analogue output, USB-C and iOS Lightning digital output – universal compatibility with cameras, smartphones, and computers.
• Rotating clasp-type fur windshield, making it hard to fall off.
• The receiver’s clasp allows the adapter to be easily removed.

Product Diagram

Transmitter

1. Built-in microphone capsule

2. Status indicator
   • Unpaired: Blinking blue slowly.
   • Paired successfully: Static blue.
   • Mute: Blinking red slowly.
   • Noise cancellation enabled: Static green.
   • Maximum/minimum gain: Blinking blue/green three times slowly.
   • Low battery: Blinking red quickly.
   • Charging: Static red.
   • Fully charged: Red light off.

3. Power button
   • Press and hold to power on or off.
   • Press to mute or unmute the microphone.

4. +/- button
   • Press the “+” or “–“ button to adjust microphone gain in six levels. Press both buttons at the same time to enable/disable noise cancellation. The settings are retained even after the power is turned off.

5. Belt clip

6. Charging contacts

7. USB-C charging port
   • For charging the transmitter. (It’s okay to use the transmitter while charging.)

Receiver

1. Status indicator
   • Unpaired: Blinking blue slowly.
   • Paired: Static blue.
   • Low battery: Blinking red quickly.
   • Charging: Static red.
   • Fully charged: Red light off.

2. Power button
   • Press and hold to power on or off.

3. Mono/stereo toggle
   • The output mode can be set to either mono or stereo. When in mono mode, the audio from the capsule, or capsules will be mixed to both the left and right sides. When in stereo mode, the two capsules’ audio output will be separated to the left and right sides.

4. Contacts

5. Clasp

6. Charging contacts

7. USB-C charging port
   • For charging the receiver. An external device can be powered and charged through this port while the receiver with a USB-C or iOS Lightning adapter is plugged into it.

8. MFi Certified Lightning Adapter
   • It can be connected to an iOS Lightning device.

9. USB-C adapter
   • It can be connected to Android smartphones, tablets, computers, and other USB-C devices.

10. 3.5mm TRS adapter
    • It can be connected to cameras, recorders, mixers, or other devices with a 3.5mm TRS jack.

Charging Case

1. Slot for transmitter(s)
2. Slot for adapters
3. Slot for fur windshield
4. Slot for receiver
5. Charging contacts
6. USB-C charging port
7. OPEN button
8. Charging indicator

Operation Guide

First, attach the fur windshield to the transmitter(s) when using it outdoors or in a windy environment.

Next, push the selected adapter into the receiver. Connect the receiver to your audio devices, such as a camera, smartphone, tablet, computer, etc.

Next, press and hold the power buttons to turn the transmitter(s) and receiver on. After that, the transmitter(s) and receiver will be automatically paired as soon as it is switched on. The indicators of both are static blue.

Toggle the M/S button to select either mono or stereo output mode. Next, it is recommended to record a sample and play it back to check if the audio level is acceptable before recording. In order to improve the recording effect in a noisy environment, it is recommended to press the +/- buttons on the transmitter(s) at the same time to enable noise cancellation.

After you’re done with recording, put the transmitter(s) and receiver back into the case for charging.

Troubleshooting

If you encounter problems when using the product, please refer to the following checklist before contacting technical support. If the problem cannot be solved, please contact the dealer’s after-sales service department using the means provided in the beginning of this user guide.

If there is no sound from the device or no sound when connected to an external device.

• Make sure the adapter on the receiver is well connected to your device or remove the adapter and wipe the charging contacts with a clean cloth.
• Make sure the microphone gain is not turned to minimum.
• Make sure the unit is not muted.

If the sound of the device is too low or too loud or even distorted.

• Adjust microphone gain to the suitable level for recording in the current environment to improve the recording effect.

Current noise or other abnormal noise appears during monitoring.

• Make sure there is no interference near the device. If the noise still exists after changing the device’s position, please contact our customer service.

The operating range of the device is limited, and the sound is frequently intermittent.

• Make sure there is no interference between the transmitter and receiver. If the intermittent sound still occurs frequently, please contact our customer service.

Failed to charge the transmitter(s) or receiver via the charging case.

• Make sure the charging contacts of both are in full contact. Wipe the charging contacts with a clean cloth and try again.
• If you want to check whether the magnetic force is aging or whether the charging contacts of the two are not in sufficient contact, press the transmitter/receiver placed in the charging box to check whether it is in a charging state. If the transmitter(s) or the receiver is still failed to be charged, please contact our customer service.

Specifications

Transmitter & Receiver

open areas without any interferences according to the FCC standard)
RF output power| <10mW
Distortion| <0.01%
Frequency response| 20Hz-20kHz
Sampling rate| 48kHz
Bit rate| 16bit
Signal-to-Noise ratio| >85dB
Sensitivity| -42dB
Audio input| TX: Built-in microphone capsule
Audio output| RX: 3.5mm TRS analogue output, USB-C, and iOS Lightning cable digital output
Battery voltage / capacity| TX: 3.7V/95mAh
RX: 3.7V/120mAh
Power requirements| Built-in lithium-ion battery / Charging contacts / USB-C charging port
Built-in battery life| TX: Approx. 10 hours
RX: Approx. 6 hours
Weight| TX: 12g
RX: 15g (with an adapter)
Dimensions| TX: 59×16.2×12.8mm
RX: 61×18.2×12.8mm
Operating temperature| 0°C to 50 °C
Storage temperature| -10°C to 50°C

Charging case

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
• Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
• Natural wear and aging of consumables or components during use (such as batteries, etc.).
• Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and  inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
• If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and Directive 2011/65/EU amended (EU) 2015/863.

WEEE
This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

References

• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• alza.at
• Alza | Alza.co.uk
• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.cz
• alza.de
• alza.hu
• alza.sk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>