Aerpro G9120 Inspection Camera User Manual
- June 15, 2024
- Aerpro
Table of Contents
Aerpro G9120 Inspection Camera
Specifications
- Product Name: G9120 Inspection Camera
- Camera Resolution: HD 720P
- Monitor Resolution: 800 x 480 (RGB)
Product Usage Instructions
Installation and Setup
- Open the back cover of the battery compartment.
- Insert 4 AA batteries (Not included).
- Close the back cover.
- Unwind the cable to the required length.
- Press and hold the power button to turn the camera on.
Attaching Accessories
- Slide an attachment over the base of the camera.
- Gently squeeze the black mounting module at the base of the attachment to secure it in place around the camera.
Using the Inspection Camera
- To turn the inspection camera On/Off, press and hold the power button until the screen displays the startup screen. Press and hold the power button again to turn off the inspection camera.
- Short press the power button to take a picture (snapshot). Long press the power button to start recording.
- To view pictures or videos, short press the power button. Long press the power button to delete them.
- Before recording, please format your Micro SD card on your computer. Set the cluster size to 64KB. The capacity of the card should be between 2G and 32G.
- To adjust the camera’s LED light brightness, short press the LED brightness adjustment button to turn it on. Short press again to change the intensity. Press again to turn off.
- To zoom, short press the zoom icon. Press once for 1.5X magnification, twice for 2.0X magnification. Long press the zoom icon to switch to black & white mode.
- To adjust the screen brightness, short press the screen adjustment button. After reaching maximum brightness, press again to restore.
- To flip and mirror the image, long press the flip/mirror button.
- When the product is not in use, remove the batteries.
FAQ
Q: Can I use rechargeable batteries with this camera?
A: Yes, you can use rechargeable AA batteries with this camera.
Q: Can I connect this camera to a computer or TV?
A: No, this camera does not have connectivity options for direct connection to a computer or TV.
Q: Is the camera lens and cable waterproof?
A: Yes, the camera lens and cable are waterproof. However, the receiver is not waterproof.
Q: What is the recommended capacity for the Micro SD card?
A: The capacity of the Micro SD card should be between 2G and 32G.
THANK YOU
Congratulations on your purchase of our Aerpro G9120 inspection video camera. Please read the user manual carefully before using this product. This camera can live stream as well as record video to a Micro SD card.
FEATURES
Monitor
- 4.3” TFT LCD monitor
- 800 x 480 Screen resolution (RGB)
- Supports Micro SD card up to 32GB (Not included)
- 2x variable digital zoom
- JPG photo format
- AVI video format
- Power supply 4AA batteries (Not included)
Camera
- 5.2mm Flexible camera head (1.0M length)
- 1280 x 720 Effective pixels
- 50° Optical lens viewing angle
- LED Torch light
- CMOS Image sensor
- IP67 Waterproof level
INCLUSIONS
- 1x Inspection camera
- 1x Magnetic tip
- 1x Mirror tip
- 1x Hook tip
- 1x Protective case
- 1x User manual
STRUCTURE
INSTALLATION AND USE
- Open the back cover of the battery compartment. Insert 4AA batteries (Not included). Close the back cover. Unwind the cable to the required length. Press and hold the power button to turn the camera on.
INSTALLING ATTACHMENTS
- Slide an attachment over the base of the camera. Gently squeeze the black mounting module at the base of the attachment to secure in place around the camera.
- To turn the inspection camera On/Off press and hold the power button until the screen displays the startup screen. Press and hold the power button to turn off inspection camera.
- Short press to take a picture (snapshot). Long press to record.
- Short press to view a picture or video. Long press to delete them.
-
Short press the screen adjustment to adjust the screen brightness. After the screen reaches the maximum brightness, press again to restore.
-
To adjust the camera’s LED light brightness, short press to turn it on, short press again to change intensity. After it reaches maximum press again to turn off.
-
Zoom/Black & White: Short press to zoom. Once for 1.5X magnification, twice for 2.0X magnification. Long press to switch to black & white mode.
- Flip & mirror: Long press to flip and mirror the image
NOTES:
- Do not over bend the camera lens cable with force particularly where it connects to the receiver.
- The camera lens and cable is waterproof but the receiver is not.
- When the product is not is use, remove the batteries.
CAMERA
MONITOR
FCC INFORMATION
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference;
(2) This device must accept any interference received, including interference
that may cause undesired operation. Changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
EU Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or
retailer for recvelina advice.
TECHNICAL ASSISTANCE
If you need assistance setting up or using your Aerpro product now or in the
future, call Aerpro Support Australia
TEL: 03 – 8587 8898 FAX: 03 – 8587 8866
Mon-Fri 9am – 5pm AEST
This manual is considered correct at time of printing but is subject to
change.
For latest manuals and updates refer to the website.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>