VSYSTO B6E Motorcycle Dash Cam User Manual
- June 15, 2024
- VSYSTO
Table of Contents
VSYSTO B6E Motorcycle Dash Cam
Before using the product
This product records videos while the motorcycle is operating. Use this product only for reference when investigating incidents or road accidents. This product is not guaranteed to record ALL events. The device may not properly record accidents with small impacts that are too minor to activate the impact sensor or accidents with massive impacts that cause the motorcycle’s battery voltage to deviate. Video recording does not begin until the product is completely turned on (booted up). To ensure that all motorcycle events are recorded, wait until the product is completely booted up after turning it on, and then begin operating the motorcycle. VSYS is not responsible for any loss caused by an accident, nor is it responsible for providing any support regarding the outcome of an accident.
During use of the product
Read the following safety information to properly use the product.
- Do not operate the product while driving a motorcycle. Distraction while driving may cause accidents and result in injury or death.
- Do not install the product in a place exposed to flammable gas. Doing so may result in fire or an explosion.
- Do not use the product in a place with high humidity or temperature. It may cause malfunction of the product, explosion, or fire.
- Do not disassemble the product or subject the product to impact. Doing so may damage the product. Unauthorized disassembly of the product voids the product warranty.
- Do not fully submerge the product in water. Doing so may damage the product.
- Do not use the product outside for a prolonged period of time when it is raining. Doing so may cause water damage to the product.
- Do not clean the product with chemicals or detergent. Doing so may damage the product. Clean the product using a clean, soft, dry fabric.
- Ensure that the memory card is in the correct direction before inserting it into the product. The memory card slot or the memory card may be damaged if it is inserted incorrectly.
- Please format cards before use and anytime a significant amount of data has been collected to ensure that the device and SD cards are working properly together. It is recommended to format the TF card at least once a week.
- Use the product at a temperature between -20°C to 65°C. The product may not function as designed and some permanent physical damages may result if it is operated out of the specified temperature ranges. Such damages are not covered by the warranty.
- The product emits electromagnetic radiation that might interfere with medical devices. Consult with your physician and your device manufacturer if you are uncertain whether you can use this device.
- Please use this product to the extent permitted by law.
Packing List
The items may vary for different buying options.
-
Main unit
-
Front cam & extension cable
-
Power cord
-
Wired Controller
-
Rear cam & extension cable
-
mount
-
GPS tracker
-
USB test cable
-
Cable ties
Main unit structure
The product design may change without prior notice.
- Card slot
- Mount hole
- Screen
- Menu/Back
- Move Up
- Move Down / Display Mode Switch
- OK / REC / Play / Pause
- Camera 1
- Camera 2
- Wired Remote
- Split Cable(Power Cable / GPS Tracker)
Connection Diagram
The connection may change without prior notice.
Menu Setting Description
Press button of remote controller to pause recording before setup the system, then long press button to enter menu system.
Select the setting options and press the button to enter Video Mode.
- Short press in video mode to switch different display mode;
Select the setting options and press the button to enter Playback Mode.
-
Short press to select the video to playback
-
Long press for 3 seconds in the playback mode to switch the video files list between front camera and rear camera.
Video file name information: REC_170809-163256F.MOV
“REC” means normal video file
“GSR” means file recorded by triggering G-sensor
“163256” means time 16 o’clock 32 minutes 56seconds
“MOV” means video file format
“KEY” means file recorded by pressing remote
“170809” means date 9th August, 2017
“F” means front camera video file
NOTE: The recorder will lock the latest 10 emergency recording videos (GSR-XXXX.MOV)triggered by G-sensor and 10 emergency recording videos(KEY- XXXX.MOV) manually triggered by the remote from being overwritten, and after more than 10, the recorder will automatically start to overwrite the earliest locked emergency video.
Select the setting options and press the button to enter Setting Mode.
Select the setting options and press the button to enter Language
Settings.
Menu Setting Description
Video clip time| 1 / 2 / 3 / 5min can be selected| Date format|
YYYY MM DD/MM DD YYYY/DD MM YYYY
---|---|---|---
Sound record| On / Off| Speed watermark| Turn on/off the speed watermark
when playback videos on the PC/APP
MIC sensitivity| Set the sound level of mic| Rear camera mirror| Set the
mirror image display for rear camera
Auto screen off| Set LCD backlight off, or off after 1min/3min| GPS Status|
Display the current number of satellites, longitude, latitude and other
information
Button sound| On / Off| Time zone select| Time zone selection around the
world
Voice guide| On / Off| System reset| Reset your device to factory settings
Clock setting| Set date & time| Format SD card| Delete all videos from the
memory card
Protection sensitivity| G-sensor adjustment| FW version| Check the firmware
version
Wi-Fi Connection
When successfully connected with your smartphone via built-in Wi-Fi, you can save and playback the driving recording videos on your smartphone. You can also change settings of dash cam via Wi-Fi app.
- Scan the QR code below to download the latest App from Google Play and App Store. Or you can search ‘Wifi Camera’ on Google Play or App Store to download it.
| |
---|---|---
iOS| Android| App logo - Select ‘MotoDV_B6’ from available Wi-Fi network to connect. The default password is ‘1234567890’.
- Wi-Fi app operation
The camera will pause the recording when you open Wi-Fi App (connected successfully) and Enter recorder during recording, and start recording automatically after 30 seconds without any operation or 30 seconds after you quit the App. Also, you can start/stop recording manually via the Wi-Fi App.
Click to stop recording manually. Click to start recording manually.
Click to take photo.
Click to switch front and rear camera. Click to enter/exit full screen view.
Click to go back to the previous menu.
If you failed to connect to the camera, please check if you have any pop-up
tips to notify you there is no internet for the connected wifi network and if
you will stay connected. Just say YES and everything will work great. Some may
have no this kind of notification, so we recommend you Turn Off Cellular Data
when using the WiFi app.
Contact seller if it encounters an error when setting the SSID.
Quick Installation Guide
ATTENTION
- Please do NOT flush the main unit, lenses, power module, and remote with the high-pressure water gun.
- Do not bend the cable nor twist the connector during installation.
- The position of the main unit and lens cable should be away from the high-voltage circuit like xenon lamp, ignition plug etc.
- If your motorcycle is a traditional carburetor system please try to change a suitable R-value ignition plug when you meet the interference phenomenon.
Quick Test
- Connect cam 1 & cam 2 to the dash cam main unit.
- Find the USB test cable and connecting to the power bank or USB adaptor to do a quick test before nstallation.
- Prepare installation if everything looks good.
The connection should follow the same color and the correct arrow direction.
The input voltage never exceeds 5V and the current needs to be 2A or above
for the USB power source to make sure the dash cam works properly.
Camera Installation
Screw Nut: Just screw the nut when when the cable connected but not twist
the cable or the connector
The concave and convex bayonet of the joint shall be matched correctly
Power Module Installation
Connect red wire to the battery positive terminal, black wire to the negative terminal, and yellow wire to the 12V port controlled by key ignition (ACC wires). The dash cam will automatically turn on and off with your ignition switch.
Wired Controller
| LED Light Frequency | Camera Status |
|---|---|
| Slow blinking | Recording properly |
| Fast blinking | Emergency record mode |
| Steady (light on) | Stop recording |
| Off (light off) | Power off |
GPS Module Installation
- You can go to our official website www.szv-sys.com to download the GV player.
- Fix the GPS module to a proper place on your motorcycle with the double-sided foam tape. Please note the “GPS” icon must face the sky directly without any barrier, in case of the signal is shielded.
Customer Support
Contact Us
support-us@vsysto.com
https://www.facebook.com/szvsys
https://www.youtube.com/c/szvsys
Shenzhen V-SYS Technology Co.,Ltd.
302, BUILDING A9, TIANRUI INDUSTRIAL PARK, NO. 35, FUYUAN FIRST ROAD,
ZHANCHENG COMMUNITY, FUHAI STREET, BAO AN DISTRICK, SHENZHEN, CHINA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>