i-Tec U3HUB448 Metal Charging Hub User Guide
- June 15, 2024
- i-tec
Table of Contents
i-Tec U3HUB448 Metal Charging Hub
Specifications
- USB 3.0 Metal Charging Hub
- 4X USB-A 3.0 Port
Charging
You can use the external power adapter included in the package if you
connect devices with high power consumption, such as printers or scanners, to
the USB ports in the HUB. Please follow these basic rules while using the
power adapter:
- Keep it out of reach of children
- Don’t put it into the water
- Do not expose it to a 230V circuit
The HUB supports charging of various USB mobile equipment, including smartphones (such as iPhone and Samsung phones), e-book readers, multi-media players, GPS navigators, and tablets (eg, Asus, Toshiba, GoClever, Prestigio, Emgeton, Sensor). To charge your devices, follow these steps:
- Connect the original cable of the equipment you want to charge to one of the USB ports on the HUB.
- Connect the power adapter to the HUB.
Installation
The HUB is installed automatically without the need for any drivers on Windows 7/8/8.1/10 and higher , as well as Mac OS
Follow these steps to install the HUB:
- Connect the power adapter to the HUB.
- Connect the power adapter to a socket outlet with 230V.
- Connect the HUB to your notebook/PC using the USB cable (USB 3.0, 2.0, or 1.1 standard).
Please read the entire instruction manual carefully. A detailed manual is available on our website www.i-tec.cz/en/ in the tab „Manuals, drivers”. In case of any issues, please contact our technical support at: support@itecproduct.com
INTRODUCTION
- i-tec USB 3.0 Metal Charging HUB is an ideal companion for everybody who does not have enough USB ports in his/ her notebook, ultrabook or PC and who has to constantly connect and disconnect his/her favorite USB equipment such as flash disks, mobile phones, tablets, digital cameras, MP3 players, printers, etc.
- This HUB offers 4 USB 3.0 ports with the Plug & Play function and standard USB charging – the HUB will automatically detect connected equipment for USB charging. The USB 3.0 interface is important mainly for data transfers from
- USB 3.0 memory cards and flash disks will use its high transfer speed most.
- The advantage is includes an external power adapter which you can use for backing up data on external hard drives or for connecting high-power consumption devices that are powered directly from the USB port.
- This HUB does not require the installation of drivers. You will just connect it by the USB cable to your computer and immediately you can start using it. This HUB has built-in overcurrent protection for your computer in case of a short connection on the peripheries. The interface is compatible with USB 2.0 / 1.1.
- Thanks to its compact dimensions and low weight it is an an ideal companion to your notebook when traveling.
SPECIFICATION
- 4x USB 3.0 port for connecting USB equipment
- 1x USB 3.0 cable for connecting the HUB to a notebook / PC
- Transfer rate up to 5 Gbps
- USB charging detection mechanism for mobile devices
- Plug & Play function
- Overload and overcurrent protection
- LED diode
- Storage temperature -10~85 °C
- Working temperature 0-40 °C
- Power adapter : input AC 100-240 V, 50-60 Hz, 0.8 A; output DC 5 V, 2 A
- OS Windows 7 32/64bit, 8 32/64bit, 8.1 32/64bit, 10 32/64bit, macOS X 10.x or higher
- Product dimensions 112 x 37 x 18 mm
- Product weight 70 g
DESCRIPTION
- 4x output USB 3.0 ports for connecting USB equipment
- LED – the diode is ON when the HUB is connected to the power adaptor or to a USB port of a notebook / PC
- Input for connecting the power adaptor
- USB 3.0 cable type A for connecting to a notebook / PC
CHARGING
You can use an external power adapter if you connect a printer, scanner or
other high-power consumption devices to USB ports in HUB (power adapter is
included). Respect the basic rules while using this power adapter (for ex. do
not let it in reach of children, if the adapter is in a 230 V circuit, do not
put it into the water, and so on)
CHARGING
-
The HUB supports charging of the connected USB mobile equipment such as smartphones (including iPhones and
-
Samsung phones), e-book readers, multi-media players,
-
GPS navigators, and tablets (e.g., Asus, Toshiba, GoClever,
Prestigio, Emgeton, Sencor). Using the original cable connect the equipment to be charged to the USB port of the -
HUB. At the same time, the power adaptor needs to be connected to the HUB as well.
INSTALLATION IN WINDOWS 7 / 8 / 8.1 / 10 AND HIGHER, MAC OS X AND HIGHER
- The HUB is installed automatically, no need to install drivers.
- Connect the connector of the power adaptor to the HUB and connect the power adaptor to a socket outlet with 230V.
- Then plug the HUB via USB cable into the available USB port (USB 3.0, 2.0, or 1.1 standard) of your notebook / PC and follow the on-screen instructions. The HUB will be installed and displayed in the Device manager as “Generic USB Hub” and “Generic USB SuperSpeed Hub”.
SYSTEM REQUIREMENTS
Windows 7 32/64bit, Windows 8 32/64bit, Windows 8.1
32/64bit, Windows 10 32/64bit, macOS X 10.x or higher
PACKAGE CONTENTS
- i-tec USB 3.0 Metal Charging HUB 4 Port with built-in USB cable (28 cm)
- Power adapter (DC cable 120 cm)
- Quick Start
SAFETY INSTRUCTIONS
- Do not be exposed to extreme temperatures and air humidity.
- Use the device on flat surfaces – you will prevent it from slipping and falling to the ground.
- Save the user manual for possible use later.
In cooperation with the service department:
- Check functionality after falling to water or the ground.
- Check functionality when the cover is broken.
- Send the device back if it does not work under the user manual.
FAQ
For frequently asked questions about this product, please visit our website
www.i-tec.cz/en/, and go to the “FAQ” tab of this product.
www.i-tec.cz/en
References
- Home | i-tec
- Homepage | i-tec
- Home | i-tec
- Home | i-tec
- Inicio | i-tec
- Inicio | i-tec
- Accueil | i-tec
- Homepage | i-tec
- Homepage | i-tec
- Home | i-tec
- Start | i-tec