VSYSTO F9D Motorcycle Video Recorder Dashboard Camera User Manual
- June 15, 2024
- VSYSTO
Table of Contents
VSYSTO F9D Motorcycle Video Recorder Dashboard Camera
Product Information
Specifications
- Main unit structure : Cable ties, Type C port, Card slot, Screw hole, Mount hole, Display screen, Power cable
- Packing List:
- Main unit
- Front camera & extension cable
- Wired Controller Rear camera & extension cable
- Power cord
- Handlebar mount
- GPS tracker
- USB test cable
Product Usage Instructions
-
Before using the product:
Read the following safety information to properly use the product. -
During use of the product:
Connect the dashcam to your PC via a USB C cable to transfer files. -
Menu Setting Description:
To access the menu system, press the [OK] button of the remote controller to pause recording before setting up the system. Long press the [OK] button to enter the menu system. -
Video Mode:
Select the setting options and press the [OK] button to enter Video Mode. This mode allows you to choose different display modes and adjust settings such as DVR shutdown countdown after engine off, tire pressure, temperature, altitude, atmospheric pressure, WiFi speed, video recording time, and date & time information. -
Playback Mode:
Select the setting options and press the [OK] button to enter Playback Mode. In this mode, you can select the video files to playback. The video files are listed between the front camera and the rear camera. F/ indicates front cam video playback, and R/ indicates rear cam video playback. -
Setting Mode:
Select the setting options and press the [OK] button to enter Setting Mode. In this mode, you can adjust various settings such as video clip time (1/2/3/5min), sound record (On/Off), GPS status protection level, G-sensor adjustment, MIC sensitivity, button sound (On/Off), auto screen off, voice guide (On/Off), parking monitoring (On/Off), tire pressure unit (bar/PSI), parking sensitivity, TPMS alarm sound (On/Off), recording time after flame out (15min/30 min/1H/2H/3H), TPMS threshold, date format, system reset, and clock setting.
Before using the product
This product records videos while the motorcycle is operating. Use this product only for reference when investigating incidents or road accidents. This product is not guaranteed to record ALL events. The device may not properly record accidents with small impacts that are too minor to activate the impact sensor or accidents with massive impacts that cause the motorcycle’s battery voltage to deviate. Video recording does not begin until the product is completely turned on (booted up). To ensure that all motorcycle events are recorded, wait until the product is completely booted up after turning it on, and then begin operating the motorcycle. VSYS is not responsible for any loss caused by an accident, nor is it responsible for providing any support regarding the outcome of an accident.
During use of the product
Read the following safety information to properly use the product.
- Do not operate the product while driving a motorcycle. Distraction while driving may cause accidents and result in injury or death.
- Do not install the product in a place exposed to flammable gas. Doing so may result in fire or an explosion.
- Do not use the product in a place with high humidity or temperature. It may cause malfunction of the product, explosion, or fire.
- Do not disassemble the product or subject the product to impact. Doing so may damage the product. Unauthorized disassembly of the product voids the product warranty.
- Do not fully submerge the product in water. Doing so may damage the product.
- Do not use the product outside for a prolonged period of time when it is raining. Doing so may cause water damage to the product.
- Do not clean the product with chemicals or detergent. Doing so may damage the product. Clean the product using a clean, soft, dry fabric.
- Ensure that the memory card is in the correct direction before inserting it into the product. The memory card slot or the memory card may be damaged if it is inserted incorrectly.
- Please format cards before use and anytime a significant amount of data has been collected to ensure that the device and SD cards are working properly together. It is recommended to format the TF card at least once a week.
- Use the product at a temperature between -20°C to 65°C. The product may not function as designed and some permanent physical damages may result if it is operated out of the specified temperature ranges. Such damages are not covered by the warranty.
- The product emits electromagnetic radiation that might interfere with medical devices. Consult with your physician and your device manufacturer if you are uncertain whether you can use this device.
- Please use this product to the extent permitted by law.
**Packing List
**
The items may vary for different buying options.
Main unit structure
The product design may change without prior notice.
Connecting dashcam and your PC with via a USB C cable, allows the recorder to be used as a USB drive to transfer files to your PC.
Connection Diagram
The connection may change without prior notice.
Menu Setting Description
Press the [OK] button of remote controller to pause recording before setup the system, then long press [OK] button to enter menu system.
- Select the setting options and press the [OK] button to enter Video Mode.
- Short press in Video Mode to switch different display mode;
- Long press to enter smart gauge mode.
- Select the setting options and press the [OK] button to enter Playback Mode.
- Short press to select the video to playback
- Long press for 3 seconds in the playback mode to switch the video files list between front camera and rear camera.
Video file name information: REC_170809-163256F.MOV
- “REC” means normal video file
- “GSR” means file recorded by triggering G-sensor
- “163256” means time 16 o’clock 32 minutes 56seconds
- “MOV” means video file format
- “KEY” means file recorded by pressing remote
- “170809” means date 9th August, 2017
- “F” means front camera video file
NOTE : The recorder will lock the latest 10 emergency recording videos (GSR-XXXX.MOV) triggered by G-sensor and 10 emergency recording videos(KEY- XXXX.MOV) manually triggered by the remote from being overwritten, and after more than 10, the recorder will automatically start to overwrite the earliest locked emergency video.
- Select the setting options and press the [OK] button to enter Setting Mode.
- Select the setting options and press the [OK] button to enter Language Settings.
Menu Setting Description
Video clip time| 1 / 2 / 3 / 5min can be selected| GPS
Status| Display the current number of satellites, longitude, latitude and
other information
---|---|---|---
Sound record| On / Off| Protect Level| G-sensor adjustment
MIC sensitivity| Set the sound level of mic| Button sound| On/Off
Auto screen off| Set LCD backlight off, or off after 1min/3min| Voice guide|
On/Off
Parking monitoring| On / Off| Tire pressure unit| bar/PSI
Parking sensitivity| Set the vibration sensitivity when parking| TPMS alarm
sound| On/Off
Recording time after flame out| Set recording time after flame out (15min/30
min/1H/2H/3H )| TPMS Threshold| Set the value of the max and min tire pressure
alarm
Date format| YYYY MM DD/MM DD YYYY/DD MM YYYY| System reset| Reset your device
to factory settings
Clock setting| Set date & time| Format SD card| Delete all videos from the
memory card
Time zone select| Time zone selection around the world| WiFi mode| On/Off
Speed watermark| Turn on/off the speed watermark when playback videos on the
PC/APP| Operation Guide| Introduction to the operation of the
wired remote
Unit system| KMH,MPH| FW version| Check the firmware version
Rear camera mirror| On/Off| NOTE: The settings may change without prior
notice!
Quick Installation Guide
ATTENTION
- Please do NOT flush the main unit, lenses, power module, and remote with the high-pressure water gun.
- Do not bend the cable nor twist the connector during installation.
- The position of the main unit and lens cable should be away from the high-voltage circuit like xenon lamp, ignition plug etc.
- If your motorcycle is a traditional carburetor system please try to change a suitable R-value ignition plug when you meet the interference phenomenon.
Quick Test
- Connect cam 1 & cam 2 to the main unit.
- Find the USB test cable and connecting to the power bank or USB adaptor to do a quick test before installation.
- Prepare installation if everything looks good.
CAUTION: The connection should follow the same color and the correct arrow direction.
CAUTION: The input voltage never exceeds 5V and the current needs to be 2A or above for the USB power source to make sure the dash cam works properly.
Camera Installation
Screw Nut: Just screw the nut when the cable connected but not twist the cable or the connector.
Power Module Installation
Connect red wire to the battery positive terminal, black wire to the negative terminal. The smart power module works by detecting the voltage change or continuous vibration.
- Make sure the power module is installed in a place that can detect the bike vibration .
- The dash cam automatically powers on when the engine is started. It won’t work if only the ignition switch is turned on.
- The dash cam will continue to record for approximately 5 minutes after the motorcycle is turned off, and then shut down.
GPS Module Installation
- You can go to our official website www.szv-sys.com to download the GV player.
- Fix the GPS module to a proper place on your motorcycle with the double-sided foam tape. Please note the “GPS” icon must face the sky directly without any barrier, in case of the signal is shielded.
Wired Controller
- Short press in video mode to switch the display to the rear camera in full screen;
- Long press in video mode to take snapshots and enter the manual emergency recording mode.
- NOTE: The recorder will lock the latest 10 emergency recording videos from being overwritten, and after more than 10, the recorder will automatically start to overwrite the earliest locked emergency video.
- Short press to pause video recording, and then long press to enter Menu Settings
- Short press in video mode to switch the different display modes.
- Long press in video mode to enter Smart Gauge Mode, and then short press to switch different information.
| LED Light Frequency | Camera Status |
|---|
Blue light
| Slow blinking| GPS is searching for satellites.
The satellite icon in the display is white.
Steady (light on)| GPS positioning success.
The satellite icon in the display is green.
Red light
| Slow blinking| Recording properly
Fast blinking| Emergency recording mode(G-sensor/Manual)
Steady (light on)| Stop recording
Light off| Power off
Smart Gauge Mode
- Long press in video mode to enter Smart Gauge Mode, and then short press to switch different display information.
Contact Us
We constantly optimize and strive for excellence to make driving safer, and
smart. Share your product experience and story with us to inspire someone
else. If you have any thoughts on how we can do even better, we welcome your
constructive feedback and suggestions. Please do not hesitate to contact us,
please contact us by below ways.
- MAIL TO : support-us@vsysto.com
- FACEBOOK: https://www.facebook.com/szvsys
- YOUTUBE : https://www.youtube.com/c/szvsys
Shenzhen V-SYS Technology Co.,Ltd. 302, BUILDING A9, TIANRUI INDUSTRIAL PARK, NO. 35, FUYUAN FIRST ROAD, ZHANCHENG COMMUNITY, FUHAI STREET, BAO AN DISTRICT, SHENZHEN, CHINA
FAQ’s
How can I transfer files from the dashcam to my PC?
Connecting the dashcam and your PC via a USB C cable allows the recorder to be used as a USB drive to transfer files to your PC.
What does the REC in the video file name mean?
REC means a normal video file recorded by the dashcam.
How many emergency recording videos does the recorder lock?
The recorder will lock the latest 10 emergency recording videos triggered by the G-sensor and 10 emergency recording videos manually triggered by the remote from being overwritten. After more than 10, the recorder will automatically start to overwrite the earliest locked emergency video.
How do I reset the device to factory settings?
In the Setting Mode, select the System reset option to reset your device to factory settings.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>