scandomestic WAD 3815 W Washer Dryers User Manual
- June 15, 2024
- scandomestic
Table of Contents
- scandomestic WAD 3815 W Washer Dryers
- Product Usage Instructions
- SAFETY INSTRUCTIONS
- Product Description
- Installation
- OPERATIONS
- MAINTENANCES
- Troubleshooting
- Technical Specifications
- Product Fiches
- Aftersales service station list
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
scandomestic WAD 3815 W Washer Dryers
Product Usage Instructions
Safety Instructions
Ensure the following safety instructions are followed:
Warning: Always disconnect the appliance from the power supply before performing any maintenance or cleaning.
Installation
Follow these steps for product installation:
- Unpack the washing machine and remove all transportation screws.
- Place the washing machine on a stable surface with at least 20mm of space between the machine and the wall.
- Connect the water supply using a special faucet for washing machines.
- Ensure proper drainage by placing the drain hose in a sink or drain.
Operation
Follow these steps to operate the washing machine:
- Load the laundry into the drum, making sure not to overload it.
- Add detergent according to the type of wash (pre-wash, main wash, or rinse) and the recommended dosage.
- Add fabric softener if desired.
- Select the desired program and additional settings (if applicable).
- Press the Start/Pause button to begin the wash cycle.
Maintenance
Regularly clean and maintain the washing machine using the following steps:
- Clean the inside of the drum and detergent compartment with a damp cloth.
- Remove and clean the filter to prevent blockages.
- Check and clean the water inlet and drain hoses regularly.
- Keep the machine and its surroundings clean and free from dust and debris.
SAFETY INSTRUCTIONS
Safety Instructions
For your safety,the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury or loss of life.
Explanation of the symbols
Warning
- This combination of symbol and signal word indicates a potentially dangerous situation which may result in death or serious injuries unless it’s avoided.
Caution
- This combination of symbol and signal word indicates a potentially dangerous situation which may result in slight or minor injuries or damage to property and the environment.
Note
- This combination of symbol and signal word indicates a potentially dangerous situation which may result in slight or minor injuries.
Warning: The electric shock!
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused.
- Before any maintenance the device, unplug the appliance from the mains.
- Always unplug the machine and turn off the watersupply after use. The max. inlet water pressure, in pascals. The min. inlet water pressure, in pascals.
- To ensure your safety, power plug must be inserted into an earthed three-pole socket. Check carefully and make sure that your socket is properly and reliably earthed.
- Make sure that the water and electrical devices must be connected by a qualified technician in accordance with the manufacturer’s instructions and local safety regulations.
- Pull out its plug from the power socket before cleaningor maintenance.
- Do not use any socket with rated current less than that of appliance. Never pull out power plug with wet hand.
- Please remember to disconnect water and power supply immediately after the clothes are washed.
Risk to children
- EN countries: the appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- Children of less than 3years should be supervised to ensure that they do not play with appliance.
- Animals and children may climb into the machine. Check the machine before every operation.
- Kids should be supervised that they do not play with the appliance.
- Glass door may be very hot during the operation. Keep kids and pets far away from the machine during the operation very wet rooms as well as in the rooms with explosive or caustic gas.
- Remove all packages and transport bolts before using the appliance. Otherwise, serious damage may result.
Risk of explosion
- Do not wash or dry articles that have been cleaned in, washed in, soaked in, or dabbed with combustible or explosive substances( such as wax, oil, paint, gasoline, degreasers, dry-cleaning solvents, kerosene, etc.) This may result in fire or explosion.
- The washer dryer is not to be used if industrial chemicals have been used for cleaning.
- The exhaust air must not be discharged into a flue which is for exhausting fumes from appliances burning gas or other fuels.
- Before hand thoroughly rinse items of washing by hand.
Caution: Installing the product!
- This appliance is for indoor use only.
- It isn’t intended to be built-in using.
- The openings must not be obstructed by a carpet.
- The appliance shall not be installed in bath room or very wet rooms as well as in the rooms with explosive or caustic gases.
- The appliance with single inlet valve only can be connected to the cold water supply. The appliance with double inlet valves should be correctly connected to the hot water and cold water supply.
- Plug must be accessible after installation.
- The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the washer dryer.
- The appliance shall not be installed at a humid place.
- The household appliance isn’t intended to be built-in.
- Remove all packages and transport bolts before using the appliance. Otherwise, serious damage may result.
Risk of damaging appliance
- The product is only for home use and is only designed for the textiles suitable for machine washing and drying.
- Do not climb up and sit on top cover of the machine.
- Do not lean against machine door.
- Cautions during Handling Machine:
- Transport bolts shall be reinstalled to the machine by a specialized person.
- The accumulated water shall be drained out of the machine.
- Handle the machine carefully. Never hold each protruded part on the machine while lifting. Machine door can not be used as the handle during the conveyance.
- This appliance is heavy. Transport with care.
- That the hands shall not be inserted into running water extracting tub.
- Please do not close the door with excessive forces. If it is found difficult to close the door, please check if the clothes are put in or distributed well.
- It is forbidden to wash carpets.
Operating the appliance
- Before using the wash machine, the product shall be calibrated.
- Before washing the clothes at first time, the product shall be operated in one round of the whole procedures without the clothes inside.
- Flammable and explosive or toxic solvents are forbidden. Gasoline and alcohol etc.Shall not be used as detergents. Please only select the detergents suitable for machine washing, especially for drum.
- Make sure that all pockets are emptied. Sharp and rigid items such as coins,brooch,nail,screw or stone etc. may cause serious damages to this machine.
- Please check whether the water inside the drum has been drained before opening its door. Please do not open he door if there is any water visible.
- Be careful of burning when the product drains hot washing water.
- After the program is completed, Please wait for two minutes to open the door(Some model).
- Never refill the water by hand during washing.
- If it is unavoidable that fabrics that contain vegetable or cooking oil or have been contaminated by hair care products. it be placed in a tumble dryer they should first be washed in hot water with extra detergent , this will reduce, but not eliminate, the hazard.
- Adequate ventilation has to be provided to avoid the back flow of gases into the room from appliances burning other fuels, including open fires.
- Do not dry unwashed items in the appliance.
- Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine,waxes and wax removers should be washed in hot with an extra amount of detergent before being dried in the appliance.
- Items such as foam rubber (latex foam), shower caps, water proof textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should not be dried in the machine.
- Fabric softeners, or similar products, should be used as specified by the fabric softener instructions.
- The machine whose lid can be opended during water extraction,that it takes 15s or more for complete stop of water extracting chamber tub.
- The final part of a washer dryer cycle occurs without heat (cool down cycle) to ensure that the items are left at a temperature that ensures that the items will not be damaged.
- Remove all objects from pockets such as lighters and matches before use the appliance.
- WARNING: Never stop a washer dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated.
Packaging/Old appliance
This marking indicates that this product should not be disposed with other household wastes throughout the EU.To prevent possible harm to the environment or human health from uncontrolled waste disposal,recycle it responsibly to promote the sustainable reuse of material resources.To return your used device, please use the collection systems or contact the retailer where the product was purchased. They return and can take this product for environmental safe recycling.
Product Description
Note: The product line chart is for reference only, please refer to real product as standard.
Accessories
Installation
Installation area
Warning: Stability is important to prevent the product from wandering the power cord.
Before installing the machine, the location characterized as follows shall be selected:
- Rigid, dry, and level surface
- Avoid direct sunlight
- Sufficient ventilation
- Room temperature is above 0°C
- Keep far away from the heat resources such as coal or gas.
Unpacking the washing machine
Warning
- Packaging material (e.g. Films, Styrofoam) can be dangerous for children.
- There is a risk of suffocation! Keep all packaging well away from children.
- Remove the cardboard box and styrofoam packing.
- Lift the washer dryer and remove the base packing.Make sure the small triangle foam is removed with the bottom one together. If not, lay the unit down with side surface, then remove the small foam from the unit bottom manually.
- Remove the tape securing the power supply cord and drain hose.
- Remove the inlet hose from the drum.
Remove transport bolts
Warning
- You must remove the transport bolts from the backside before using the product.
- You’ll need the transport bolts again if you move the product , so make sure you keep them in a safe place.
Please take the following steps to remove the bolts:
- Loosen 4 bolts with spanner and then remove them.
- Stop the holes with transport hole plugs.
- Keep the transport bolts properly for future use.
Levelling the washer dryer
Warning
- The lock nuts on all four feet must be screwed tightly against the housing.
- Check if the legs are closely attached to the cabinet. If not, please turn them to their original positions tighten the nuts.
- Loosen the lock nut turn the feet until it closely contacts with the floor.
- Adjust the legs and lock them with a spanner, make sure the machine is steady.
Connect Water Supply Hose
Warning
- To prevent leakage or water damage, follow the instructions in this chapter!
- Do not kink, crush, modify or sever water inlet hose.
- For the model equips hot valve,connect it to hot water tap with hot water supply hose. Energy consumption will decrease automatically for some program.
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
- Connection between ordinary tap and inlet hose.
- Connection between screw tap and inlet hose.
- Connect the other end of inlet pipe to the inlet valve at the backside of product and fasten the pipe tightly clockwise.
Drain Hose
Warning
- Do not kink or protract the drain hose.
- Position drain hose properly ,otherwise damage might result of water leakage.
There are two ways to place the end of drain hose:
- Put it into the water trough.
- Connect it to the branch drain pipe of the trough.
Note
- If the machine has drain hose support, please install it like the following.
Warning
- When installing drain hose, fix it properly with a rope.
- If drain hose is too long, do not force it into washing machine as it will cause abnormal noises.
OPERATIONS
Quick Start
Caution
- Before washing, please make sure it’s installed properly.
- Before washing at first time, the washing machine shall be operated in one round of the whole procedures without clothes in as follows.
- Before Washing
- Washing
- Note: If default is selected, step 3 can be skipped.
- The function button line chart is for reference only, please refer to real product as standard.
- After Washing
- Buzzer beep or “End” on display.
Before Each Washing
- The working condition of the washer should be(0-40)°C.If used under 0°C,the inlet valve and draining system may be damaged. If the machine is placed under condition of 0°Cor less, then it should be transferred to normal ambient temperature to ensure the water supply hose and drain hose are not frozen before use.
- Please check the labels and the explanation of using detergent before wash. Use non-foaming or less-foaming detergent suitable for machine washing properly.
Warning
- When washing a single clothes, it may easily cause great eccentricity and give alarm due to great unbalance. Therefore it is suggested to add one or two more clothes to be washed together so that draining can be done smoothly.
- Don’t washing the clothes touching with kerosene, gasoline, alcohol and other flammable materials.
Detergent Dispenser
- I Pre wash detergent
- II Main wash detergent
- Softener
Caution
- Detergent only need to be added in “case I “after selecting pre-washing for machines with this function.
Programme| ׀| ׀ ׀| | Programme| ׀| ׀ ׀|
---|---|---|---|---|---|---|---
1 Hour W/D| | X| O| 20°C| | X| O
Wash and Dry| | X| O| Wool| | X| O
Quick 15’| | X| O| Mix| O| X| O
Dry Only| | | | Synthetic| O| X| O
Air Wash| | | | ECO 40-60| | X| O
Allergy Care| O| X| O| Intensive| | X| O
Steam Care| O| X| O| Cotton| O| X| O
Spin Only| | | | | | |
- X = Means must
- O = Means optional
Note
- As for the agglomerated or ropy detergent or additive, before they are poured into the detergent box, it is suggested to use some water for dilution to prevent the inlet of detergent box from being blocked and overflowing while filling water.
- Please choose suitable type of detergent for the various washing temperature to get the best washing performance with less water and energy consumption.
Control panel
Note: The chart is for reference only, Please refer to real product as standard.
- On/Off
- Product is switched on or off.
- Start/Pause
- Press the button to start or pause the washing cycle.
- Option
- This allows you to select an additional function and will light when selected.
- Programmes
- Available according to the laundry type.
- Display
- The display shows the settings, estimated time remaining, options, and status messages for your washer. The display will remain on through the cycle.
- A. Delay
- B. Door Lock
- C. Child Lock
- D. Reload
- E. Pre Wash
- F. Extra Wash
- G. Option Confirm
- H. Speed Wash
- I. Extra Rinse
- J. Anti-crease
- K. Spin Speed
- L. Temp.
- M. Rate Of Progress(Pre Wash- Wash -Rinse-Spin)
- N. Dry level(Air Dry-Gentle Dry-Normal Dry-Extra Dry)
- O. Wash Time/ Delay Time
Option
-
Pre Wash
- The Prewash function can get an extra wash before main wash,it is suitable for washing the dust rises to surface of the clothes;You need to put detergent into the Case (I) when select it.
-
Extra Rinse
- The laundry will undergo extra rinse once after you select it.
-
Speed Wash
- The function can decrease the washing time.
-
Delay
Set the Delay function:- Select a programme
- Press the Delay button to choose the time(the delaying time is 0-24 H.)
- Press [Start/Pause] to commence the delay operation
- Cancel the Delay function: Press the [Delay] button until the display be 0H.It should be pressed before starting the programme. If the programme already started, should press the [On/Off] button to reset the programme.
- Caution: If there is any break in the power supply while the machine is operating, a special memory stores the selected programme and when the power is restarted, press the [On/Off] button the program will continues.
-
Extra Wash
- Very dirty clothes can choose it, select it can increase the washing time and intensity to increase the washing effect.
-
Anti-Crease
- Anti-Crease function can be used to reduce the wrinkles of clothes.
Other Functions
Reload
This operation can be executed during the washing progress. When the drum is still rolling and there is large amount of water with high temperature in the drum. The state is unsafe and the door cannot be opened forcefully. To press [Start/Pause] for 3 sec. to reload, and start the clothes adding in the midway function. Please follow the steps as below:
- Wait until the drum stops rotation.
- The door lock is unlocked.
- Close the door when the clothes are reloaded and press the [Start/Pause] button.
Caution: Don’t use the Reload function when the water level over the edge of the inner tub or the temperature is higher.
My Cycle
- Memory the frequently used programmes
- Press 3sec. to memory the running programme. The default is cotton.
Child Lock
- To avoid mis operation by children.
Caution
- Press the two button 3sec. also to be released the function.
- The “Child Lock” will lock all buttons except [On/Off].
- Cut off the power supply , the kid’s protection is to be released.
- The child lock will remain effective when the power is resumed for some models.
Temp.
- Press the button to regulate the temperature(Cold,20℃,30℃, 40℃,60℃,90℃)
Speed/Spin
- Press the button to change the spin speed.
Programme | Default Speed(rpm) |
---|---|
1500 | |
1 Hour W/D | 1500 |
Wash and Dry | 1500 |
Quick 15’ | 800 |
Dry Only | 1200 |
Air Wash | – |
Allergy Care | 800 |
Steam Care | 800 |
Spin Only | 1000 |
1500 | |
--- | --- |
20℃ | 1000 |
Wool | 600 |
Mix | 800 |
Synthetic | 1200 |
ECO40-60 | 1500 |
Intensive | 800 |
Cotton | 1500 |
Caution
- When the lights of speed are off means the spin speed is 0.
- After Muting the buzzer function, the sounds will not be activated any more.
Dry
Press the Dry button continuously to choose the dry level: Extra Dry/Normal Dry (Normal)/ Gentle Dry(Soft)/Time/Air Dry.
- Extra Dry: Need to wear clothes immediately ,we can choose this function
- Normal Dry(Normal): The normal dry procedure
- Gentle Dry(Soft): Only to dry slightly and then is just ok .
- Air Dry: Clothes is roated to remove peculiar smell without water in high temperature.
Time
Users can choose gears according to practical need. When there are fewer clothes to be dried, it is recommended to choose timing drying. The optional time is 30 Mins, 60 Mins, 120 Mins, 180 Mins (The default spinning time is 10 Mins, the actual display time is 0:40, 1:10, 2:10, 3:10), the corresponding drying capacity is recommended respectively 0.5kg/1kg/2kg/3kg.
Note
- Drying hints
- Clothes could be dried after spinning
- To ensure quality dry the textiles,please classify them according to their kinds and the drying temperature.
- Synthetic should be set the proper drying time .
- If you want to iron the clothes after drying,please put them for a while.
- Clothes not suitable for drying
- Particularly delicate items such as synthetic curtains,woolen and silk, clothes with metal inserts,nylon stockings,bulky clothes,such as anoraks,bedcovers,quilts,sleeping bags and duvets must not be dried.
- Clothes padded with foam-rubber or materials similar to foam-rubber must not be machine dried.
- Fabrics containing residues of setting lotions or hair sprays, nail solvents or similar solutions must not be machine dried in order to avoid the formation of harmful vapours.
Option Confirm
- Confirm the selection of the Pre Wash,Extra Rinse,Extra Wash,Night Wash or Anti-crease function.
Programmes
Programmes are available according to the laundry type.
Washing Programmes Table
Programme| Load(kg)| Temp.(°
Default
| C Default Time
---|---|---|---
| 8.0/6.0| | 8.0
1Hour W/D|
1.0
| Cold|
0:58
Wash & Dry|
6.0
| 40|
5:04
Quick 15′|
2.0
| Cold| 0:15
Dry Only| -/6.0| –| 4:14
Air Wash
| 6.0| –|
0:30
Allergy Care
| 8.0/6.0| 60| 2:09
Steam Care
| 8.0/6.0| 40|
1:47
Spin Only
|
8.0
| –|
0:12
20℃| 8.0| 20| 1:01
Wool| 2.0| 40| 1:07
Mix| 8.0/6.0| 40| 1:20
Synthetic| 4.0/4.0| 40| 3:17
ECO 40-60
| 8.0| –| 3:35
Intensive| 8.0| 40| 3:48
Cotton| 8.0/6.0| 40| 3:39
- Concerning to Regulation(EU) No 1061/2010,
- The EU energy efficiency class is: A
- Energy test program: Intensive;Speed:The highest speed; Temp.: 60℃;
- Other as the default.Half load for 8.0Kg machine: 4.0Kg.
- Concerning to Regulation(EU) 2019/2023,
- The EU energy efficiency class is: E
- Energy test program: ECO 40-60/Wash & Dry.
- ECO 40-60: as the default
- Half load for 8.0Kg machine: 4.0Kg.
- Quarter load for 8.0Kg
- maschine 2.0Kg
- Wash and Dry: dry level (Extra dry), Other as the default.
- Half load for 6.0 Kg machine: 3.0Kg
Note
- The parameters in this table are only for user’s reference. The actual parameters maybe different with the parameters in above mentioned table.
- The programme with can be choose dry function.
MAINTENANCES
Cleaning And Care
Warning
- Before your maintenance starts, please unplug the machine and close the tap.
Cleaning The Cabinet
- Proper maintenance on the washing machine can extend its working life. The surface can be cleaned with diluted non-abrasive neutral detergents when necessary. If there is any water overflow, use the wet cloth to wipe it off immediately.
- No sharp items are allowed.
Note
- Formic acid and its diluted solvents or equivalent are forbidden, such as alcohol, solvents or chemical products,etc.
Cleaning The Drum
- The rusts left inside the drum by the metal articles shall be removed immediately with chlorine-free detergents.
- Never use steel wool.
Note
- Don’t put laundry in the washing machine during the drum cleaning.
Cleaning The Door Seal And Glass
- Wipe the glass and seal after each wash to remove lint and stains. If lint builds up it can cause leaks.
- Remove any coins, buttons and other objects from the seal after each wash.
Cleaning The Inlet Filter
Note
- Inlet filter must be cleaned if there is less water.
Washing the filter in the tap
- Close the tap.
- Remove the water supply hose from the tap.
- clean the filter.
- Reconnect the water supply hose.
Washing the filter in washer dryer:
- Screw off the inlet pipe from the backside of the machine.
- Pull out the filter with long nose pliers and reinstall it back after being washed.
- Use the brush to clean the filter.
- Reconnect the inlet pipe.
Note
- If the brush is not clean, you can pull out the filter washed separately;
- Reconnect, turn on the tap.
Clean Detergent Dispenser
- Press down the arrow location on softener cover inside the dispenser drawer.
- Lift the clip up and take out softener cover and wash all grooves with water.
- Restore the softener cover and push the drawer into position.
Note: Do not use alcohol,solvents or chemical products to clean the machine.
Cleaning Drain Pump Filter
Warning
- Be careful of the hot water!
- Allow detergent solution to cool down.
- Unplug the machine to avoid electrical shock before washing.
- Drain pump filter can filter the yarns and small foreign matters from the washing.
- Clean the filter periodically to ensure the normal operation of washing machine.
- Open the lower cover cap
- Rotate 90°C and pull out the emergency drain hose, and take off the hose cap
- After water runs out,reset the drain hose
- Open the filter by turning to the counter clockwise
- Remove extraneous matter
- Close the lower cover cap
Caution
- Make sure that valve cap and emergency drain hose are reinstalled properly, cap plates should be inserted aligning to hole plates otherwise water may leak;
- Some machines don’t have emergency drain hose, so step 2 and step 3 can be skipped. Rotate lower cover cap directly to make water run into basin.
- When the appliance is in use and depending on the programme selected there can be hot water in the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When replacing the cover, ensure it is securely re-tightened.
Troubleshooting
- The start of the appliance does not work or it stops during operation.
- First try to find a solution to the problem, If not, contact the service centre.
Note: After the check, activate the appliance. If the problem occurs or the display shows other alarm codes again, contact the service.
Technical Specifications
- Power Supply: 220-240V~,50Hz
- MAX.Current: 10A
- Standard Water Pressure: 0.05MPa~1MPa
Product Fiches
Supplier’s name or trade mark: Scandomestic A/S
Supplier’s address: Thrigesvej 2, 8600 Silkeborg
Model identifier: WAD 3815 W
General product parameters:
Parameter| Value| Parameter| Value
Rated capacity (kg)| Rated capacity| 6.0| Dimensions in cm| Height| 85
Rated washing
capacity
| 8.0| Width| 60
Depth| 48
Energy Efficiency Index| EEIW| 60.0| Energy efficiency class| EEIW| B
EEIWD| 82.0| EEIWD| E
Washing efficiency index| IW| 1.04| Rinsing effectiveness (g/kg dry
textile)
| IR| 5.0
JW| 1.04| JR| 5.0
Energy consumption in kWh per kg per cycle, for the washing cycle of the
household washer-dryer, using the eco 40-60 programme at a combination of full
and partial loads. Actual energy consumption will depend on how the appliance
is used| 0.545| Energy consumption in kWh per kg per cycle, for the wash and
dry cycle of the household washer-dryer at a combination of full and half
loads.
Actual energy consumption will depend on how the appliance is used
| 3.768
Water consumption in litre per cycle, for the eco 40-60 programme at a
combination of full and partial loads. Actual water consumption will depend on
how the appliance is used and on the hardness of the water| 48| Water
consumption in litre per cycle, for the wash and dry cycle of the household
washer-dryer at a combination of full and half loads.| 90
| | Actual water consumption will depend on how the appliance is used and on
the hardness
of the water
|
---|---|---|---
Maximum temperature inside the treated textile (°C)| Rated washing
capacity
| 38| Remaining moisture content (%)| Rated washing
capacity
| 53
Half| 38| Half| 53
Quarter| 21| Quarter| 53
Spin speed (rpm)| Rated washing capacity| 1500| Spin-drying efficiency class|
B
Half| 1500
Quarter| 1500
Eco 40-60 programme duration (h:min)| Rated washing capacity| 3:38| wash and
dry cycle duration (h:min)| Rated capacity| 9:30
Half| 2:48| Half| 6:40
Quarter| 2:48
Airborne acoustical noise emissions during the spinning phase for the eco
40-60 washing cycle at rated washing capacity (dB(A) re 1 pW)| 80| Airborne
acoustical noise emission class for the spinning phase for the eco 40-60
programme at rated washing capacity| C
Type| [built-in/free-standing]| Freestanding
Off-mode (W)| 0.50| Standby mode (W)| N/A
Delay start (W) (if applicable)| 4.00| Networked standby (W) (if applicable)|
N/A
Minimum duration of the guarantee offered by the supplier:
This product has been designed to release silver ions during the washing
cycle| No
Additional information:
Weblink to the supplier’s website, where the information in point 9 of Annex
II to Regulation (EU) 2019/2023 is found:
www.scandomestic.dk
Note
- Programme setting for testing in accordance with applicable standard En60456 for wash.
- Programme setting for testing in accordance with applicable standard En50229 for wash and dry.
- When using the test programmes, wash the specified load using the maximum spin speed.
- The actual parameters will depend on how the applicance is used,and maybe different with the parameters in above mentioned table.
- The household washing machine is equipped with power management system.The duration of the left-on mode time is less than 10 minute.
- The noise emissions during washing/spinning for the standard washing cycle at full load.
Remarks
- The energy efficiency class is from A(highest efficiency) to D (lowest efficiency)
- Energy consumption per year, based on 220 standard washing cycles for standard programme at 60°C and 40°C at full and partial load, and the consumption of the low-power modes. Actual energy consumption will depend on how the appliance is used.
- Water consumption per year based on 220 standard washing cycles for standard programme at 60°C and 40°C at full and partial load. Actual water consumption will depend on how the appliance is used.
- Spin-drying efficiency class from G (least efficient) to A (most efficient).
- The standard 60°C programme and the standard 40°C programme are the standard washing programmes. These programmes are suitable to clean normally soiled cotton laundry and they are the most efficient programmes in terms of combined energy and water consumptions for washing that type of cotton laundry. The actual water temperature may differ from the declared cycle temperature. Please choose the suitable type of detergent for the various washing temperatures to get the best washing performance with less water and energy consumption.
Access to professional repair, such as internet webpages, addresses, contact details.
Model no: WAD 3815 W
Aftersales service station list
Address | Scandomestic A/S |
---|---|
Contact Number | 7242 5571 |
Website | Scandomestic.dk |
QR code | 372128 |
Relevant information for ordering spare parts, directly or through other
channels provided by the manufacturer, importer or authorised representative;|
Scandomestic A/S
The minimum period during which spare parts, necessary for the repair of the
appliance, are available;| 10 years
Instruction on how to find the model information in the product database, as
defined in Regulation (EU) 2019/2019 by means of a weblink that links to the
model information as stored in the product database or a link to the product
database and information on how to find the model identifier on the product.)|
www.scandomestic.dk
Note: The address or contact phone number of the service site is subject to change without prior notice. Please confirm whether the service station is a directly affiliated one of our company when requiring services.
Scandomestic A/S
- DK-8600 Silkeborg
- Tel.: + 45 7242 5571
- www.scandomestic.dk
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>