Scandomestic BIK 343 Refrigerator User Manual

BIK 343 W Refrigerator
User manual

BIK 343 Refrigerator

Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances.
This appliance can be used by children aged from 8 years and above and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
To avoid contamination and depravity of food, please respect the following instructions:

• Opening the door for long periods can cause a significant increase of the temperature in the of the appliance.
• Cleaning regularly surfaces that can come in contact with food and is accessible for drainage systems.
• Clean water tanks if they have not been used for 48 h. or more; Flush the water system connected to a water supply if water has not been drawn for 5 days or more.
• Store raw meat and fish in suitable containers in the refrigerator, so it is not in contact with, or can drip onto other food.
• Two-star frozen-food compartments are suitable for storing pre-frozen food, storing or making ice- cream and making ice cubes.
• One-, two- and three-star compartments are not suitable for the freezing of fresh food.
• If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to preventmould developing within the appliance.
• This refrigerating appliance is not intended to be used as a built-in appliance.
• Note: When operating in an environment other than the specified climate type (i.e., beyond the rated ambient temperature range), the appliance may not be able to maintain the desirable compartment temperatures.
• How to use the ice-making box. Place the ice-making box in the upper position of the freezer compartment, so that it ices up as soon as possible.
• Lamp type: LED-light. Energy efficiency level: G
• Light source in this product is replaceable only by a professional

Cautions

Disposal of the old appliance

Before disposing an old appliance, please make sure it’s inoperative and safe. Unplug the appliance and remove or destroy all of the springs, latches, or bolt-locks in order to avoid the risk of child entrapment.
It must be noted that the refrigeration system contains insulating gases and refrigerants, which require specialized waste disposal. The valuable materials contained in a refrigerator can be recycled. Contact your local waste disposal center  for proper disposal of an old appliance and contact your local authority or your dealer if you have any question. Please ensure that the pipe work of your refrigerator dose not get damaged prior to being picked up by the relevant  waste disposal center, and contribute to environmental awareness by insisting on an appropriate, any-pollution method of disposal.
Disposal of the packaging of your new appliance
All the packaging materials employed in the package of your new appliance may be disposed without any danger to the environment.
The cardboard box may be broken or cut into smaller pieces and given to a waste paper disposal service. The wrapping foil is made of polyethylene and the polyethylene pads and stuffing contain no fluorochloric hydrocarbon.
All these valuable materials may be taken to a waste collecting center and used again after adequate recycling.
Consult your local authorities for the name and address of the waste materials collecting centers and waste paper disposal services nearest to your house.

Safety Instructions and Warnings

Before starting the appliance, read the information given in the User’s Guide carefully.
The User’s Guide contains very important observations relating to the assembly, operation and maintenance of the appliance.
Keep the User’s Guide in a safe place and remember to hand it over to the subsequent owner, if you ever sell the appliance.
The manufacturer does not accept responsibility for any damages that may arise due to non-observation of the following instruction.

• Damaged appliances are not to be put into operation. In case of doubt ,consult your supplier.
• Connection and installation of the appliance are not to be carried out in strict compliance with the relative instructions set forth in the Use’s Guide.
• For the purpose of safety ,the appliance must be properly grounded in accordance with specifications.
• Always remember to unplug the appliance before cleaning. To disconnect the appliance, pail at the plug itself not the cord.
• Keep alcoholic beverages in airtight bottles or containers and always store in an upright position. In addition, do not store any explosive substances inside the appliance-Danger of explosion!
• Do not damage any parts of the appliance that carry refrigerant by piercing or perforating the refrigerant’s grooves with sharp or pointed items, crushing or twisting any tubes, or scraping the coatings off the surfaces. If the  refrigerant spurts out and gets into eyes, it may result in serious eye injuries.
• Do not obstruct or cover the ventilation grille of the appliance.
• Do not allow children to play with the appliance. In no case should children be allowed to sit on the drawers or hang onto the door.

Should you have bought your new fridge / freezer to replace an old appliance, please make sure that all existing latch-or bolt-locks on the old appliance are destroyed, before you dispose of it.
This will ensure that a child cannot get trapped inside.
Please have the old appliance ecologically disposed of by a company specialised in environmental protection, since the appliance may contain harmful components in the refrigerant and this must be removed with special equipment.  Please check with your dealer or with your local authority.
Make sure that the refrigerating system containing the refrigerant, especially the heat exchanger at the back of the appliance, is not damaged during transportation to the disposal or collection site, so that you can be sure that the  refrigerant does not leak out.
Details concerning the type of refrigerating/isolating agent used can be found on the appliance’s rating plate.

• Warning: Keep ventilation openings in the appliance enclosure or in the structure for building in ,clear of obstruction.
• Warning: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
• Warning: Do not damage the refrigerant circuit
• Warning: Do not use electrical appliances inside the food storage of the appliance.
• It is necessary to have the plug accessible after installation.
• If the supply cord is damaged, it must be replaced by a supplied cord or assembly available from the manufacturer or its service agent.
• Connection of power supply and installation should be conducted in accordance with the instructions in the operation manual.
• Only the tools regulated by the manufacturer can be used for defrosting.

Specifications

• This appliance is designed for food refrigeration, ice making and frozen food storage.
• It is intended strictly for household use. If using it for industrial or commercial purpose , be sure to observe the relevant norms and regulations.
• The refrigerating circuit is leak-proof. 4

Refrigerator Diagram– Preparation

1. Shelves
2. Vegetable and fruit tray
3. Temperature Controller
4. Egg tray
5. Bottle racks

This diagram may vary slightly with the layout of the refrigerator you have just purchased due to technical improvements.

Preparation

Unpacking
Remove all packing materials.
Check attachments and materials
Checking should be conducted with reference to the Packing List. Contact the local distributor if discrepancies are found.
Ensure proper location of the refrigerator.

• Make sure the refrigerator is kept upright during handling. If an inclination is required, it should not exceed 45 degrees. Otherwise the appliance may get damaged resulting not only in compromised refrigeration performance.
• To avoid product damage or personal injury, the refrigerator should be unpacked by two persons after it is located in a previously selected position.
• Before installation, make sure the refrigerator has no visible exterior damage.
• When handling the refrigerator, do not lift it by holding the worktop, to prevent any damage to the refrigerator.
• Do not start up a refrigerator that is damaged.
  Clean the refrigerator before use.
  (See the following section “Cleaning”)

Idle time
After the refrigerator has been sited and cleaned, let it stand for more than 30 minutes before connecting the power source

Function & Operating Instructions

Operating instruction of simple electronic control:

1. Plug in the appliance and thermostat works at 4 level.

2. When the fridge door is opened, the control panel will illuminate and lamps in fridge compartment are turned on, but the fan in fridge will stop. After 60s since door’s opening, door-opening alarm starts working and sends out  continuous sonic signals. After 420s since door’s opening, lamps eliminate automatically but can be illuminated by touching switch. During opening of the fridge door, control panel keeps illumination. When door’s closed, internal  lamps eliminate at once  and control panel eliminates 60s later.

3. If you want to adjust the inside temperatures, please press button ,choose different levels from 1 to 6 to get lower temperature.

4. Press button for 3 seconds to switch off your appliance and the button illumines, power is cut off. Internal lamps eliminates, compressor stops working. Press the button for 3 seconds to switch on your appliance, the symbol shines and power is connected again.

5. On the no frost models, there is a function : compulsive defrosting. For purpose of service or cleaning, the frost on the freezer evaporator need to be removed. Press the buttons for 3 seconds to switch on the compulsive
   defrosting function and button flashes. The function stops automatically when the sensor detects designed temperature 10~12 ℃.Press buttons for 3 seconds to switch off the compulsive defrosting function  manually, and the button stop flashing.

6. Fault display and alarm
   This appliance has ‘fault display & alarm’ function. Once the sensors got fault, there are alarms displayed on the temperature displaying.
   1 – Sensor of fridge compartment
   2 – Sensor of freezer evaporator
   3 – Sensor of freezer
   The appliance still cools but professional service engineer should be called and check the appliance.

7. Appearance and internal schematic diagram of simple electronic

Instructions

Cold storage is for short-term food storage or for daily consumption.
Although the temperature in most parts of the cold storage compartment can be regulated between 0 and 10 degrees Centigrade, extended periods of food storage is not recommended. Cold storage should only be used for short-term storage.

Cold storage compartment

1. Eggs and butter
2. Pickled food and seasonings
3. Beverages and bottled food
4. Cookies, cooked food and milk
5. Meat and sausages
6. Fruits, vegetables and salads

Cautions for cold storage

• Hot food must be cooled to room temperature before storing in the refrigerator

Dry any water droplets on the food before placing it in the refrigerator.
It is recommended that food be sealed in suitable storage bags before being placed in the refrigerator; this will prevent moisture in the food from evaporating and prevent vegetables and fruit from withering or altering in flavor.

• Do not store excess quantities or weights of food; food should be stored with spaces in between for better storage results. Never overload shelves, as they may collapse under excessive loads.
• Food to be stored should be sorted according to consumer requirements. Food consumed daily should be placed in the most convenient area, this will minimize opening periods for the door. Do not place food too close to the internal walls.

Food holder cleaning

• Food holders can be taken out for cleaning

LED Lamp:

• Lamp type: LED-light. Energy efficiency level: G
• Light source in this product is replaceable only by a professional

Instructions for food storage
*Storage period will be extended if vegetables are placed with their roots towards the cold source.

• Leaves of carrots or turnips should be removed before storage.
• Put a wad of tissue on the bottle holder before placing bottles on it so that later cleaning is easier
• Onions, garlic, ginger, water chestnuts and other root vegetables should not be stored in the refrigerator, as these foods are suitable for long-term storage at normal temperatures.
• Ripe squash, melon, papaw, bananas and pineapples should not be stored in the refrigerator. Freezing will accelerate the ripening process.

Defrosting the cold storage compartment
The cold storage compartment is designed for automatic defrosting. Frost formed on the back wall will melt and flow via the drainpipe to the evaporating container over the compressor on the back of the refrigerator, where the heat  generated by the compressor will evaporate the water.

Caution: Always keep the drain over the vegetable and fruit tray clear to ensure the normal flow of defrosted water. Use the rod provided to clear any blockages.

Cleaning

The refrigerator should be cleaned regularly to prevent the formation of bad odors.

• Disconnect the power before cleaning the refrigerator.

• Do not use a hard brush, steel brush, detergent, gasoline or other solvents, hot water, acid or alkali for cleaning.

• Wipe water drops on the surface of the refrigerator with a soft cloth.
  (1) Do not use excessive amounts of water for cleaning the refrigerator
  (2) Use a dry cloth to clean the switch, the lamp and the temperature controller

• Always  keep the rubber door seal clean

• Clean the back and sides of the refrigerator regularly.

Cessation of Operation

If the power failure lasts for an extended period, unplug the refrigerator and clean the refrigerator as previously described.
Keep the door of refrigerator open when the power is turned off to prevent any food remaining in the compartment from producing bad odors.
Caution: It is recommended that the refrigerator is not turned off

Power failure
Even in summer, food can be stored in the refrigerator for a few hours after a power failure.

• Don’t put additional food into the refrigerator during a power failure.
• Avoid opening the door during power failures
• If prior notice of a power failure is given, make some ice and put it in a container in the top of the cold storage compartment.
  Caution: temperature in the refrigerator will rise during a power failure or in the event of technical problems, and the storage period will be reduced.

During Vacations

• Remove any food from refrigerator is the vacation is short. Turn the temperature selection knob to the proper position, and make sure that the door of the refrigerator is properly closed.
• If the vacation is long, take out the food from the refrigerator and disconnect the power.
  When the frost inside melts, clean and dry the compartment.

Discarding

• Remove the door of the refrigerator when you get rid of it, in case children may get trapped in.

Moving the refrigerator

• Unplug the refrigerator
• Remove any food
• Tigh0ten the shelf and vegetable tray with tapes
• Tightly close the door with tape

Questions and Answers

Events below are not problems:

• The temperature of the refrigerator and the compressor will rise and the compressor will run for comparatively longer periods when the refrigerator is first started.
• Wipe water drops on the external surface of the refrigerator with a soft cloth.
• When the refrigerator is opened frequently or stay open too long in humid seasons, the cavity will be dampened.
• A slight sound will be heard when the liquid refrigerant circulates or when the compressor switches on and off.
• A slight sound will be heard when defrosted water drops into the evaporating dish.
• The compressor will operate for comparatively longer periods if excessive quantities of food are stored or the ambient temperature is high.
• The evaporator will produce odors if the compartment is not cleaned.
  Caution: The refrigerator should never be restarted until a period of at least five minutes has elapsed.

Please determine the cause of the problem before making any repairs.

and fuse) * The temperature knob is at the 0 position

• Low voltage
  The lamp does not blink.| * Bulb failure
• Power supply not connected
• The temperature knob is at the 0 position
  Excessive noise.| * Uneven placement
• Contact between the refrigerator and a wall or other article
  Compressor operates for a long period or
  temperature does not reach set point.| * First time of operation
• Excessive food stored
• Frequent opening of the refrigerator door due to hot weather * The temperature controller is not set properly
• Refrigerator is in direct sunlight, or close to a heat source Poor ventilation, or dirt on the condenser
  Food dry| Food not properly covered or sealed

INSTALLATION GUIDE

• This appliance can be installed as a built-in unit only. The clearances shown in the below drawing must be followed.
• Avoid damaging the product during installation, positioning of the appliance requires two people to avoid injuries or damage to the appliance.
• Your appliance should not be located in direct sunlight or exposed to continuous heat or extreme temperature (e.g., next to a radiator or boiler). If this is not feasible, then you should install an insulation plate between the appliance and the adjacent heat source.
• You should check whether there is an electrical socket available, which will be accessible after your appliance is installed.
• Place the appliance flat and firmly on a solid base.
• Be sure to leave enough space for the opening of the door to avoid damage to the appliance or personal injury.
• The cabinet size must be a minimum of (H)1223 x (W)560 x (D)550mm. The cabinet must have a ventilation recess of (W)540 x (D)50mm.
• The cabinet must not be enclosed. The back wooden panel of the cabinet must either be removed completely or cut out. This allows sufficient air circulation to cool down the condenser unit for energy efficiency.

CHANGE THE OPENING DIRECTION OF YOUR PRODUCT

To reverse the door you will need to tilt the appliance backward to access the lower hinge which holds screws. Do not tilt the appliance more than 45 degrees and do not lay the appliance flat on its side.
For your own safety, a minimum of 2 people should lift or tilt this product.
Tools Required: Torx headed screwdriver, flat headed screwdriver and hexagonal spanner or a socket driver.

1. Unscrew the 2 screws from the upper hinge and remove the fridge door by carefully lifting it up and away from the appliance. Do not fix the hinge to the opposite side.
2. Unscrew the 2 screws from the lower hinge and remove the hinge. Do not fix the hinge to the opposite side at this stage.
3. Remove all of the screw cap covers on the opposite side of the appliance from where the hinges have just been removed. Remove the hinge plugs on the top and bottom of the door and fix them to the opposite side.
4. Flip over the upper hinge 180° (so the pin is pointing upwards) and fix on to the opposite side at the bottom of the appliance. Place the door back on to the lower hinge.
5. Flip the lower hinge 180″(so the pin is pointing downwards) and put the pin of the hinge into the top of the door and fix it into place. Ensure the door is aligned horizontally and vertically so that the seals are closed on all sides before finally tightening the top hinge pin. Remove the 2 door guide holders from side of the doors and fix them on to the opposite side.

Ventilation
The cabinet size must be a minimum of (H)1223 x (W)560 x (D)550mm.

The cabinet must have a ventilation recess of (W)540 x (D)50mm.

Carefully push the appliance into the cabinet, ensuring that the cabinet door can fully close. Rollout the joint cover. On the side of the appliance without the hinges, press it between the appliance and the inside of the cabinet wall (start from the bottom and work upwards). 

Open the door and push the side of the appliance without the hinges against the side of cabinet wall. Fix the appliance in two places, 1) 2 Torx headed screws in the top plinth at the top of the appliance and 2) 2 Torx screws in the feet (1 in  each foot) at the bottom of the appliance. Apply blanking covers by clipping them into place at the top metal plinth at the top of the appliance. ![Scandomestic BIK 343 Refrigerator

• clipping](https://manuals.plus/wp-content/uploads/2023/11/Scandomestic- BIK-343-Refrigerator-clipping.png)

Apply a foot blanking covers by clipping them into place on the feet at the bottom of the appliance. The plastic stem on the foot caps is there as a guide of what the distance between the product and the edge of the cabinet should be (approximately 42mm). Snap off the plastic stem after installation.

Installation – Door attachment

1. Locate parts A and B (see the below) in the bag with the installation accessories:
   A. Door guide
   B. Door guide cover

2. Open the cabinet door and the appliance door, mark on the back of the cabinet door where the top of the appliance door reaches. Place the door guide (part A) on the back of the cabinet door, in the location shown below and mark  the position of the first hole and the last hole on the door guide. Fix the door guide into place with 2 Torx headed screws.

3. Clip the door guide cover (part B) on the door guide (part A) hiding the screws.

4. Open the appliance door and the cabinet door to 90°, remove the 2 screws from the door guide holder that is already prefixed to the door and place it on to the door guide (part A). Push the appliance door and the cabinet door together, align the holes on the door guide holder and the holes on the edge of the door and fix into place with the 2 screws that were removed previously.

5. If it needs to be adjusted use the clearance space in the screw slots of the door guide holder on to the door guide (part A).

6. Check that the cabinet door closes correctly.

7. Repeat the steps at the bottom of the appliance door.
   Please ensure you follow the below diagram when locating the door guide (part A) on the bottom of the fridge door.

8. Once this is done the installation should look like the below image .

9. There are 2 other hinge covers supplied and these are for the lower and upper hinges. These can be clipped on if required.

Access to professional repair, such as internet webpages, addresses, contact details.
Model no: BIK 343 W
Aftersales service station list:

Relevant information for ordering spare parts, directly or through other channels provided by the manufacturer, importer or authorised representative;| Scandomestic A/S
The minimum period during which spare parts, necessary for the repair of the appliance, are available;| 7 years
Instruction on how to find the model information in the product database, as defined in Regulation (EU) 2019/2019 by means of a weblink that links to the model information as stored in the product database or a link to the product database and information on how to find the model identifier on the product.)| www.scandomestic.dk

Note: The address or contact phone number of the service site is subject to change without prior notice. Please confirm whether the service station is a directly affiliated one of our company when requiring services.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>