iOttie HLCRIO125 Easy One Touch Mini Dashboard and Windshield Mount Instruction Manual

iOttie HLCRIO125 Easy One Touch Mini Dashboard and Windshield Mount

Specifications

• Depth: 5.51 inches
• Width: 2.76 inches
• Height: 4.33 inches
• Weight: 6.4 oz

Product Information

The Easy One Touch Mini is a dashboard and windshield mount designed for smartphones and cases from 2.3 to 3.5 inches wide. It features a rotating ball joint, an easy one-touch trigger button, a  lever, a pivot knob, a suction cup, and locking side arms. The mount also includes a dashboard pad that is mounted with a semi-permanent adhesive tape.

Installation

Assembling the Mount

To assemble the mount, follow these steps:

1. Connect the Mount Cradle with the Ball Joint.
2. Tighten the Cradle Knob.

Selecting a Location

Option A: Dashboard or Flat Surface Installation
For dashboard or flat surface installation, follow these steps:

1. Choose an area on a flat surface on the vehicle’s dashboard and wipe any dust or debris from the surface.
2. Peel off the film on the dashboard pad and stick it on the desired installation location.
3. Peel off the protective film on the Suction Cup and press the mount firmly onto the dashboard pad.
4. Push the Locking Lever down to engage suction.

Option B: Windshield Installation or Curved Glass Installation
For windshield installation or curved glass installation, follow these steps:

1. Choose a location on the windshield and wipe any dust or debris from the surface. A Dashboard Pad is not necessary for windshield installation.
2. Peel off the protective film on the Suction Cup and press firmly onto the windshield.
3. Push the Locking Lever down to engage suction.

Adjusting the Mount

To adjust the mount, use the following mechanisms:

Easy One Touch Mechanism

The Easy One Touch lock and release mechanism allows for easy mounting and retrieval of smartphones. Follow these steps:

1. Press the locking side arms in.
2. Press your device against the Easy One Touch trigger button. The mount’s arms will automatically close on contact and hold the device during the driving journey.
3. To release the device, press the locking side arms with one hand and retrieve the device.

Cradle Knob

The Cradle Knob allows for rotation of the Cradle in landscape mode. Follow these steps:

1. Loosen the Cradle Knob to rotate the Cradle.
2. Tighten the Cradle Knob to lock it in the desired position.

Pivot Knob

The Pivot Knob, located on the side of the Mount Base, allows for pivoting of the telescopic arm. Follow these steps:

1. Turn the Pivot Knob to pivot the telescopic arm.
2. Tighten the Pivot Knob to secure the position.

FAQ

• Q: Can the Suction Cup be reused?
  A: Yes, to reuse the Suction Cup, simply rinse it under warm water and let it air dry to restore tacky suction.

• Q: Can the Dashboard Pad be repositioned?
  A: No, the Dashboard Pad is one-time use only and cannot be repositioned once removed.

• Q: What is the maximum width of smartphones that can be accommodated by the mount?
  A: The mount can accommodate smartphones and cases from 2.3 to 3.5 inches wide.

Getting Started

For optimal mounting, please follow the detailed instructions within this manual when using the Easy One Touch Mini Dash & Windshield Mount. iOttie is not liable for possible damages due to product misuse.

• We strongly recommend using the Dashboard Pad under the Suction Cup
• The Dashboard Pad is mounted with a semi-permanent adhesive tape. Each pad is one-time use only. Once removed, it can not be repositioned.
• Universal design, fits smartphones and cases from 2.3” – 3.5” wide.
• When mounting, it is recommended that the surface & product be above 40° F.

Specifications

At a Glance

Installation

Assembling the Mount

• A. Connect the Mount Cradle with the Ball Joint
• B. Then, tighten the Cradle Knob.

Selecting a Location

Choose an installation method: Dashboard/Flat Surface (A) or Windshield/Curved Glass (B).

Option A
Dashboard or Flat Surface Installation
Choose an area on a flat surface on the vehicle’s dashboard and wipe any dust or debris from the surface.

1. Peel off the film on the dashboard pad & stick on the desired installation  location.
2. Peel off the protective film on the Suction Cup and press mount firmly  onto the dashboard pad
3. Push Locking Lever down to engage  suction

Option B
Windshield Installation or Curved Glass Installation
Choose a location on the windshield and wipe any dust or debris from the surface. Dashboard Pad not necessary for windshield installation.

1. Peel off the protective film on the Suction Cup and press firmly onto the windshield.
2. Push Locking Lever down to engage suction.

Additional Information

To reuse Suction Cup, simply rinse under warm water and let air dry to restore tacky suction.

Adjusting the Mount

1. Cradle Knob
   When mounting in landscape mode, loosen to rotate the Cradle. Tighten to lock in desired position

2. Cradle rotates 360° to easily transition between landscape and portrait viewing

3. Pivot Knob
   Located on the side of the Mount Base, turning allows you to pivot telescopic arm. Tighten to secure position.

4. Mount Pivots on 225° arc for optimal viewing.

Using the Easy One Touch Mechanism

The Easy One Touch lock and release mechanism makes it simple to mount & retrieve smartphones in seconds.

Mounting

1. Press the locking side arms in.
2. Press your device against the Easy One Touch trigger button. The mount’s arms will automatically close on contact and hold the device during the driving journey.

Releasing

Press the locking side arms with one hand and retrieve the device.

If you love your iOttie product, let us know by leaving a review online, or connect with us on our social platforms

www.iottie.com cs@iottie.com

References

• iOttie - Best Selling Car Mounts and Mobile Accessories

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>