TORRAS ZJ4 Magnetic Car Phone Mount User Guide

: June 14, 2024
: TORRAS

Table of Contents

TORRAS ZJ4 Magnetic Car Phone Mount User Guide
3-in-1 Magnetic Wireless Charging Station Model: M17
User Manual
Product Overview
Model Number: M17
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TORRAS ZJ4 Magnetic Car Phone Mount User Guide

3-in-1 Magnetic Wireless Charging Station Model: M17

User Manual

Thank you for choosing the 3-in-1 Magnetic Wireless Charging Station. Please read this user manual carefully before use and keep this manual in a safe place for future reference

Product Overview

Specifications

Product Input: 9V 2A 12V 1.5A Phone Output: 7.5W Max Earbuds Output: 5W Max

Watch Output: 3W Max Input Interface: USB-C

Compatible Devices

1. iPhone 14 Plus/14 Pro Max/14 Pro/14/13 Pro Max/13 Pro/13 mini/13/12 Pro Max
/12 Pro/12 mini/12
2. Apple Watch Series 8/7/6/5/4/3/2/SE 1st Generation/SE 2nd Generation/Ultra
3. AirPods Pro 2/Pro/3

About Indicator Lights

1. Standby State:

When the wireless charger is connected to power, the blue light will flash for 0.5 seconds and then turn off (Note: The charging areas of the mobile phone and the earbuds box share an indicator light, and the charging area of the watch has no indicator light).

2. Charging State:

When the mobile phone or earbuds box is being charged, the blue light will turn on, and then turn off after 20 seconds. When the watch is being charged, there will be no indicator light display (Note: The charging signal appears on the watch dial. The charging areas of the mobile phone and the earbuds box share an indicator light, and the charging area of the watch has no indicator light).

3. Fault Detection:

When the mobile phone or earbuds box is abnormally charged, the blue light will keep flashing. When the watch is abnormally charged, there will be no indicator light display (Note: The charging signal appears on the watch dial. The charging areas of the mobile phone and the earbuds box share an indicator light, and the charging area of the watch has no indicator light).

4. Fully Charged State:

When any of your devices are fully charged, there is no indicator light display.

How to Solve Abnormal Charging

1. Confirm whether your mobile phone has wireless charging function before use.

2. Check whether the phone deviates from the wireless inductive charging area of the charger.

3. Check whether a non-metallic protective case is used for charging mobile phones (Note: The thickness of the protective case is recommended not to exceed 0.2in/4mm).

4. When there are metal objects on the charging area, the wireless charger will automatically detects them and provide power off protection.

5. When the temperature of the wireless charger is too high, it will automatically start the protection. Please unplug the power supply first and use the charger after it recovers the temperature.

|

Safety Precautions

---|---

1. Use the product indoors or under dry environment.

2. DO NOT place or use the product in the environment of high temperature, humidity, strong static electricity and strong magnetic field.

3. DO NOT plug and unplug electrical appliances with wet hands.

4. Keep out of reach of infants and children.

5. DO NOT use the product if it is contaminated with water or dirt.

6. Non-professional personnel are not allowed to open and repair the product without authorization. FAQs

Q: What is the interface of the product?

A: It is a Type-C interface instead of a USB-A interface.

Q: Why does the product heat up?

A: It is normal if the product heats up slightly during charging, which won’t affect its safety and service life.Q: What protections for the devices does this product have?

A: It boasts overcurrent protection, overvoltage protection, short circuit protection, and overheating protection.

Warranty Statement

The warranty period of this product is 24 months. From the date of purchase, you’ll enjoy free warranty within the warranty period with valid documents.

Note:

The following conditions are not covered by the warranty:

Unable to provide formal purchase
Damage caused by man-made or irresistible
Accidental (misuse, abuse, or neglect)
Improper repair or alteration by unauthorized
Operation without following the manual’s

*The company reserves the right to make the final interpretation of the above-mentioned after-sales terms and restrictions.

After-Sales Service

If you have any questions or concerns, feel free to contact us via Amazon:

Go to your “Orders”.
Find your order in the
Click “Get help with order”.
Select the problem with your
Choose the “Subject” from the displayed Contact the seller.

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

FCC RF Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated within minimum distance of 20cm/7.9in between the radiator and your body.

IC Caution

Radio Standards Specification RSS-Gen, Issue 5

– English:

This device contains licence-exempt transmitter(s)/receiver(s) that comply

with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device.

RF Exposure Statement:

The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with the minimum distance of 10cm/3.9in between the radiator and your body.

– French:

Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS) d’Innovation, Sciences et Développement économique Canada.

|

aux RSS (RSS) d’Innovation, Sciences et Développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes:

Cet appareil ne doit pas causer d’interférences.

Cet appareil doit accepter toutes les interférences, y compris celles susceptibles de provoquer un fonctionnement indésirable de l’appareil.

Déclaration d’exposition RF:

L’équipement est conforme à la limite d’exposition aux radiations de la IC établie pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 10cm entre le radiateur et votre corp CE Caution

This device was tested for operations. To comply with RF exposure requirements

, a minimum separation distance of 20cm/7.9in must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

This device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out. This restriction will be applied to all Member States of European Union.

The device complies with RF specifications when used at 20cm/7.9in from your body.

---|---

UKCA Caution

Manufacturer’s Name: Shenzhen Yifeng Intelligent Technology Co.,Ltd. Product Name: 3-in-1 Magnetic Wireless Charging Station

Model Number: M17

Operating Temperature: 0°C-40°C
This device was tested for typical mobile type device operations. To comply with RF exposure requirements, a minimum separation distance of 10cm/3.9in must be maintained between the user’s body and the handset, including the antenna. Use only the supplied or an approved antenna. This device is in compliance with the essential requirements and other relevant provisions of UK Radio regulations requirements RER2017(S.I.2017/1206). All essential radio test suites have been carried out.