TORRAS PB-P051-01 Magstall Power Bank User Manual

TORRAS PB-P051-01 Magstall Power Bank

Product Information

The product is a power bank with USB-C input and output, as well as wireless charging output. It is equipped with a lithium battery with a rated capacity of 4.4V. The transfer efficiency of the battery charging is subject to a limiting voltage. The working temperature of the product should be within the specified range.

Please note that the specifications provided above are derived from the laboratory of TORRAS and the actual parameters may vary due to production processes and other factors. The image shown is for illustrative purposes only.

Package List

• 1 x Power Bank
• 1 x User Manual

LED Display Instructions When charging the power bank:

white light flashing
25%-50%| The first and second white lights off, the third white light
flashing, and the fourth white light always on
50%-75%| The first white light off, the second white light flashing, and
the third and fourth white lights always on
75%-99%| The first white light flashing, and the second, third, and
fourth white lights always on
100%| The four white lights always on

When the power bank charges devices:

white lights always on
50%-25%| The first and second white lights off, the third and fourth
white lights always on
25%-5%| The first, second, and third white lights off, and the fourth
white light always on
5%-1%| The first, second, and third white lights off, and the fourth
white light flashing
0%| Four white lights off

Note:
When the wireless charging output is abnormal or a foreign object (FOD) is detected, the blue light of the wireless charging indicator will continue to flash for 10 seconds. It will recover within 2 seconds after the foreign object is removed.

Wireless Charging Status

10 seconds
When there is a Foreign Object Detection (FOD) in wireless
charging| Blue light flashes quickly for 10 seconds

Product Usage Instructions

1. Use the original or certified charging cable to charge the power bank.
2. Avoid contact with liquids.
3. Do not disassemble or modify the product by yourself.
4. Avoid dropping the product.
5. Avoid using it in high or low-temperature environments.
6. Do not use the power bank after it has been immersed in water.
7. Keep the product out of reach of children.
8. When using a charger for power supply, ensure it has obtained certification and meets the standard requirements.

Safety Significant Matters

1. Store the product in a cool and dry place.
2. Avoid storing the product in high-temperature or humid environments.
3. Using a power source or charger not recommended or sold by the product manufacturer may result in fire or personal injury.
4. Do not disassemble the product. When service or repair is required, contact the authorized service center.

Battery Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

In order to bring you a better experience, please read this safety manual carefully before using this product and keep it properly for future reference.

Specifications

• Magstall Power Bank ×1,
• Charging Cable ×1, Quick Guide ×1,
• Safety Manual ×1

The parameters above are derived from the laboratory of TORRAS. The actual parameters would be different due to production process and other factors. The image shown here is indicative only.

LED Display Instruction

When charging the power bank

light flashing
25%-50%| | The first and second white lights off, the third white light flashing, and the fourth white light always on
50%-75%| | The first white light off, the second white light flashing, and the third and fourth white lights always on
75%-99%| | The first white light flashing, and the second, third and fourth white lights always on
100%| | The four white lighst always on

When the power bank charges the devices

lights always on
50%-25%| | The first and second white lights off, the third and fourth white light always on
25%-5%| | The first, second and third white lights off, and the fourth white light always on
5%-1%| | The first, second and third white lights off, and the fourth white light flashing
0%| | Four white lights off

Note:
When the wireless charging output is abnormal or a foreign object (FOD) is detected, the blue light of the wireless charging indicator will continue to flash 10s, and it will recover within 2 seconds after it is removed.

Wireless Charging Status| Wireless Charging Indicator Status| Display Instruction
---|---|---
Wireless charging the phone| | Blue light stays on
After removing the phone from wireless charging| | Blue light flashes slowly for 10 seconds
When there is a Foreign Object Detection (FOD) in wireless charging| | Blue light flashes quickly for 10 seconds

Attentions

1. Please use the original or certified charging cable.
2. Do not touch liquid.
3. Do not disassemble or modify by yourself.
4. Avoid dropping the product.
5. Avoid using it in high or low temperature environment.
6. Do not use the power bank after being immersed in water.
7. Please keep this product out of reach of children.
8. When using a charger for power supply, please purchase or use a charger that has obtained citification and meets the standard requirements.

Safety Significant Matters

1. Please store this product in a cool and dry place.
2. Do not store this product in high-temperature or humid environment.
3. Using a power source or charger not recommended or sold by the product manufacturer may result in fire or personal injury.
4. Do not disassemble the product. When service or repair is required, please refer it to professional service personnel. Incorrect reassembly could result in fire or personal injury.
5. If the product is not used for a long time, please charge and discharge it at least once every three months.
6. When charging the device, the product may heat up. This is normal and should not be cause for concern.
7. Under normal circumstances, battery performance will decline within a few years.
8. Do not put the product in high temperature environment or fire.
9. Do not use harmful chemicals or detergents to clean this product.
10. Misuse, drop or excessive force may cause damage to the product.

Battery Warning

This product is equipped with a built-in lithium battery, and please pay attention to the followings:

1. Please charge the product in time when the battery is low. To protect the battery when not in use for a long time, please turn on the product every 3 months until the battery power runs out and then fully charge the product. It is recommended to use and store it in a suitable environment.
2. It is forbidden to disassemble, hit, squeeze or throw it into fire. If severe swelling occurs, stop using it. Do not place it in a high temperature environment. If the battery life is seriously shortened, stop using it and handle it for professional maintenance.
3. There is a risk of explosion if the battery is improperly replaced, and it can only be replaced with a battery of the same or equivalent type by a professional.
4. The battery (battery pack or assembled battery) shall not be exposed to overheated environments such as sunlight or fire.
5. Products containing lithium batteries should be handled separately from household waste. If the product is disposed of, it is necessary to remove the battery and insulate the positive and negative ends and put it into the designated recycling locations or hand it over to the environmental protection recycling department for disposal, and cannot discard it at will.
6. Procedure for removing battery: a. Use a tool to remove the silicone cover on the surface of the product; b. Use a flathead screwdriver to pry open one corner of the casing, releasing the snap fastener. Then, proceed to pry open the other three corners along the edge of the casing; c. Peel off the heat film and high-temperature adhesive on the motherboard; d. Use a Phillips screwdriver to loosen all screws; e. Use a tool to open the battery nickel sheet, and then pull out the battery from the top end with your hand. (Special warning: Do not cut off all the cables between the battery and the circuit board at the same time.)

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Warning

15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

15.105 Information to the user.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>