SMARTAVI DVS2P 2 Port DVI Splitter User Guide

Table of Contents

VIDEO	Format	Input interface	Output interface	Resolution	Cable Distance
DVI 1.0	(1) DVI Female	(2) DVI Female	Up to 1920 x 1200 60 Hz	Up to 10 m

Power Supply	Dimensions	Weight	Operating Temp.	Storage Temp.	Humidity

What’s in the Box
- PART NO.: DVS2P
- 1 2-Port DVI Splitter
- 1 5 V DC 2 A power supply
- 1 Quick Start Guide
Notice
- The information contained in this document is subject to change without notice. SmartAVI makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for particular purpose.
- SmartAVI will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material.
- No part of this document may be photocopied, reproduced, or translated into another language without prior written consent from SmartAVI Technologies, Inc.

Operation for Cascade
- If you need to add more monitors, you need to attach an additional splitter box. Connect a DVI male/male extension cable between a Video Out port or the primary splitter (the splitter connected to the computer) and the Video In port on the cascaded splitter.
- NOTE: Even though you can cascade the splitter, the image might become unstable if you cascade too many tiers of splitters.
Troubleshooting
Hardware Installation
- Turn off the power of all devices (computer, monitors, and splitter).
- Connect the video source’s DVI output port to the splitter DVI input port using a standard DVI cable.
- Connect the video source’s DVI output port to the splitter’s DVI output port.
- Plug the power supply into the DVI splitter.
- Plug the power supply into the wall outlet or power bar. Check to see if the power LED light is active on the front of the DVI splitter.
- Turn on the displays.
- Turn on the video source.
- DVI IN DVI OUT
- DVS2P FRONT
- DVS2P FRONT
FAQ
- Q: Can I cascade multiple tiers of splitters?
- A: Yes, you can cascade multiple tiers of splitters. However, please note that the image might become unstable if you cascade too many tiers of splitters.

If you need to add more monitors, you need to attach an additional splitter box.
Connect a DVI male/male extension cable between a Video Out port or the primary splitter (the splitter connected to the computer) and the Video In port on the cascaded splitter.
- NOTE: Even though you can cascade the splitter, the image might become unstable if you cascade too many tiers of splitters.

No Power

Make sure that the power adapter is securely connected to the power connector of the unit.
Check the output voltage of the power supply and make sure that the voltage value is around 5VDC.
Replace the power supply.

No Video

Check if all the video cables are connected properly.
Connect the computer directly to the monitor to verify that your monitor and computer are functioning properly.
Try replacing the video cable.
Restart the computers.

Turn off the power of all devices (computer, monitors, and splitter).
Connect the video source’s DVI output port to the splitter DVI input port using a standard DVI cable.
Connect the video source’s DVI output port to the splitter’s DVI output port.
Plug the power supply into the DVI splitter.
Plug the power supply into the wall outlet or power bar. Check to see if the power LED light is active on the front of the DVI splitter.
Turn on the displays.
Turn on the video source.

VIDEO

NOTICE

The information contained in this document is subject to change without notice. SmartAVI makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for a particular purpose.
SmartAVI will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
No part of this document may be photocopied, reproduced, or translated into another language without prior written consent from SmartAVI Technologies, Inc.