SmartAVI HFX-S HDMI Point to Point Fiber Extender User Manual

SmartAVI HFX-S HDMI Point-to-Point Fiber Extender

Introduction

For reliable, uninterrupted and long-distance HDMI extension, the HFX provides the best solution with its fiber optic extension capabilities. Users can bridge large gaps that they ordinarily could not with this compact device. The HFX includes the transmitter and receiver, for complete point-to-point signal extension, with no need for any other hardware or software. The HFX delivers uncompressed HDMI signals up to 1,000 feet (300 meters). Supported resolutions go up to 4K Ultra HD (@30Hz), and 3D HD video is also supported. As with all HDMI connections, high-quality digital audio is also transmitted via the extender.

Features

• Supports HDMI 1.4a
• HDCP Compliant
• Extends HDMI signals up to 1,000 feet at 10.3Gbps with OM3 multimode duplex fiber optic cabling
• Supports resolutions up to 4K Ultra HD (@ 30Hz)
• Hot Pluggable
• EMI/RFI Resistant
• LC Type Fiber Optic Connector
• Plug-and-Play
• Quick and Easy Setup

Application

• Home Theater
• Corporate/Educational Presentations
• Call Centers
• Industrial (Long-Range Workstation Isolation)
• Information Terminals/Kiosks
• Airport Installations (Air Traffic Control/Passenger Information)
• Educational Environments with Remote Displays
• Medical Campuses (Remote Operation Away from Sensitive/Magnetic Equipment)
• Recording Studios
• Financial (Remote Servers/User Control)

Application Diagram

Connecting the HFX

1. Power off all devices including the HDMI source and display.
2. Connect an HDMI cable from the HDMI source to the HDMI port on the HFX-TX (transmitter).
3. Connect the HFX-TX to the HFX-RX (receiver) using a multimode duplex fiber optic cable (up to 1,000 ft.) with LC type connectors on both ends.
4. Connect an HDMI cable from the HDMI port on the HFX-RX to the HDMI Display.
5. Power on the HFX transmitter and receiver by plugging in their power adapters (5VDC2A).
6. Power on the HDMI source and the display.

HFX (TX/RX) Front

HFX (TX/RX) Back

Technical Specifications

VIDEO

Format| HDMI 1.4 and HDCP Compliant
HDTV Resolutions| 480p, 720p, 1080i, 1080p @ 60 Hz/48bit,

4Kx2K @ 30 Hz

Standard TV Resolution| 480i
Refresh Rate| Up to 130 Hz
Wavelength| 850 nm
Bit Error Rate Performance| 1.00E-12
Input Interface (TX)| HDMI Type A19-pin Female TMDS
Output Interface (RX)| HDMI Type A19-pin Female TMDS
Input Cable Length (TX)| Up to 40 ft.
Output Cable Length (RX)| Up to 40 ft.
AUDIO
Format| Dolby TrueHD, DTS-HD MA
Input Interface| HDMI (Integrated)
Output Interface| HDMI (Integrated)
SYSTEM
Interface| LC-Type Fiber Optic Cable Connector
Cable Requirements| Multimode, OM3
Maximum Length| 1,000 feet (300 meters)
Laser Output Power| Class 1; EN 60825-1 2007; EN 60825-2 A2 2010
OTHER
Power| External 5VDC2A @10W
Dimensions| 1.125”H x 5”W x 4.125”D
Weight| 1 lb
Approvals| UL, CE, ROHS Compliant
Operating Temp.| 32-131°F (0-55 °C)
Storage Temp.| -4-185 °F (-20-85 °C)
Humidity| Up to 95%
ORDER INFO

Part No.| Description
HFX-S| HDMI Point to Point Fiber Extender. Includes:[HFX-TX, HFX-RX,

2 x (PS5VD2A-WLLMNT)]

HFX-TXS| HDMI 2K/4K Multimode Fiber Transmitter. Includes: [HFX-TX, PS5VD2A- WLLMNT]
HFX-RXS| HDMI 2K/4K Multimode Fiber Receiver. Includes: [HFX-RX, PS5VD2A- WLLMNT]

What’s in the Box?

800.AVI.2131 • 818.503.6200 2455 W Cheyenne Ave, Suite 112 North Las Vegas, NV 89032 SmartAVI.com+

PRECAUTIONS

It is essential to adopt certain safety precautions when using the SmartAVI HFX-S HDMI Point-to-Point Fiber Extender or any other piece of audio-video equipment of a comparable nature. This will guarantee that the device functions correctly, remains risk-free, and lasts as long as possible. Take into consideration the following safety measures:

• Learn from the Guide:
  Read the user manual that was provided by the manufacturer carefully and make sure you understand it. You will gain an understanding of how to correctly install, use, and maintain something after reading this.

• Power requirements are as follows:
  Make use of the power adapter that was given or another power source that is compatible with the requirements of the extension. Using the wrong power sources can cause harm to the equipment and void any warranties that were purchased with it.

• Compatibility with Different Voltages:
  Check to see that the voltage provided by the power supply corresponds to the voltage that the fiber extender requires. When equipment is damaged or fails to perform properly due to the use of an inappropriate voltage.

• Handling of Fiber Optic Material:
  Take extra caution when working with fiber optic connections. Avoid bending the cables too much because doing so can cause damage to the fragile fibers that are contained within them. Employ the appropriate measures for cable management to stop tension from building up on the connectors.

• Electricity that is Static
  Before attaching or removing cords, you should discharge any static electricity that may be stored in your body. Static electricity can cause damage to electronic devices that are sensitive.

• Setting up in a new environment:
  Put the fiber extender in an area that is spotless, has adequate ventilation, and is devoid of any dust. Try to avoid being in conditions when the temperature, humidity, or direct sunshine are all quite high.

• Connections Made with Fiber:
  Before you begin making connections, you need to check that the fiber connectors are spotless and correctly aligned. The quality of the signal may be affected if there is dust or dirt on the connectors.

• Cable Routing:
  When routing wires, make sure to do so in a way that puts as little stress as possible on the connectors. When working with fiber optic wires, try to steer clear of any severe bends or kinks.

• Updates to the Firmware:
  If appropriate, it is recommended to check for updates to the manufacturer’s firmware on a regular basis. Maintaining the most recent version of the firmware might help enhance performance and resolve any issues that may arise.

• Disconnect While Maintenance Is Being Done:
  In order to avoid giving yourself an unintended electrical shock when doing maintenance or adjustments, make sure to disconnect the power supply and any other connections.

• Getting a Grip:
  Always make sure to follow the grounding procedures that are specified by the manufacturer. The equipment and the users are both better protected from potential electrical hazards when grounding is used.

• Rack Mounting (if it is appropriate):
  If you are going to install the equipment in a rack, you need to make sure that it is well ventilated and fixed securely so that it does not overheat.

• Compatibility of the Signal:
  Make sure that the range of the HDMI signal that is being delivered falls within the acceptable parameters for the extender. When signals are used that fall outside of this range, the performance may suffer or there may be no signal at all.

• Inspection on a Regular Basis:
  Inspect the apparatus, cables, and connections at regular intervals for any signs of wear, damage, or connections that have become loose. Take fast action regarding any concerns.

• Recommendations from the Manufacturer:
  When it comes to installation, operation, and maintenance, be sure to adhere to any and all particular guidelines offered by the manufacturer.

FREQUENTLY ASKED QUESTIONS

What is the SmartAVI HFX-S HDMI Point-to-Point Fiber Extender?

The SmartAVI HFX-S HDMI Point-to-Point Fiber Extender is a device designed to transmit HDMI signals over long distances using fiber optic cables.

What is the main purpose of the HFX-S HDMI Point-to-Point Fiber Extender?

The main purpose of this device is to extend HDMI signals over longer distances than traditional copper cables allow, while maintaining high-quality audio and video.

How does the HFX-S HDMI Fiber Extender work?

The HFX-S uses fiber optic cables to transmit HDMI signals, which allows for much longer distances without signal degradation. The extender includes a transmitter and a receiver unit.

What is the maximum transmission distance supported by the HFX-S Fiber Extender?

The SmartAVI HFX-S Fiber Extender can transmit HDMI signals up to 1,000 meters (3,280 feet) over a single multimode fiber optic cable.

Does the HFX-S Fiber Extender support high-definition video formats?

Yes, the HFX-S supports high-definition video formats, including Full HD (1080p) and even higher resolutions, as well as 3D video.

What types of audio signals does the HFX-S support?

The HFX-S supports various audio formats, including stereo audio and multi- channel audio such as Dolby TrueHD and DTS-HD Master Audio.

Is the HFX-S Fiber Extender easy to install?

Yes, the HFX-S is designed to be relatively easy to install. It typically involves connecting the transmitter to the video source and the receiver to the display, and then connecting them with a fiber optic cable.

Can the HFX-S extender be used in both residential and commercial setups?

Yes, the HFX-S extender is suitable for both residential and commercial applications where long-distance HDMI signal transmission is required.

Does the HFX-S support HDCP (High-bandwidth Digital Content Protection)?

Yes, the HFX-S Fiber Extender supports HDCP, allowing for the transmission of protected content.

Can I use the HFX-S to extend other types of signals apart from HDMI?

No, the HFX-S is specifically designed for extending HDMI signals.

What type of fiber optic cable is compatible with the HFX-S?

The HFX-S is compatible with multimode fiber optic cables.

Does the HFX-S require external power?

Yes, both the transmitter and receiver units of the HFX-S require external power sources.

What are the key components included in the HFX-S package?

The package typically includes a transmitter unit, a receiver unit, power adapters, and user documentation.

Can I use the HFX-S extender for real-time gaming?

While the HFX-S can extend HDMI signals, it's important to note that the inherent latency of fiber optic transmission may not be ideal for real-time gaming.

Is the HFX-S a plug-and-play device?

Yes, the HFX-S is designed to be plug-and-play, but some basic setup and configuration may be required.

Download the PDF Link:SmartAVI HFX-S HDMI Point to Point Fiber Extender User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>