SmartAVI HDX-POE HDMI IR and Power Extender Over Single CAT5/5e/6 Cable User Guide

SmartAVI HDX-POE HDMI IR and Power Extender Over Single CAT5/5e/6 Cable

Product Information

• Technical Specification:
  • Video Resolution: 800X600, 1024X768, 1280X1024, 1366X768, 1920X1200, 480i, 720p, 1080i, 1080p, and 3D
  • Transmission: 70 meters
  • Color Depth: Deep Color 36/30/24 Bit at 1080p and 3D
  • Audio Format: Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
  • IR Range: 38kHz, 56kHz
  • Video Bandwidth: 10.2Gbps
  • Input Video Signal: 1.2 Volts P-P
  • Input DDC Signal: 5 Volts(TTL)
• I/O Connector (TX):
  • Input: 1 x HDMI-A 19PIN Socket, 5 x 2.5mm, 1 x 3.5mm Jack for IR Receiver
  • Output: 1 x RJ45 Jack, 1 x 3.5mm Jack for IR Emitter
• I/O Connector (RX):
  • Input: 1 x RJ45 Jack, 1 x 3.5mm Jack for IR Receiver, 5 x 2.5mm
  • Output: 1 x 3.5mm Jack for IR Emitter, 1 x HDMI-A 19PIN Socket
• Mechanical:
  • Dimensions: 0.9 H x 2.9 W x 3.7 D
  • Weight: 0.26 lb
  • Power: External 12V2.5A
• Environmental:
  • Operating Temp.
  • Storage Temp.
  • Humidity
• Safety:
  • Certificate Power Adapter: FCC, CE, RoHS UL, CE, FCC, RoHS

Product Usage Instructions

1. Connect the HDMI source to the HDMI input of the HDX-POE-TX unit.
2. Connect the HDMI output of the HDX-POE-TX unit to the HDMI input of the display.
3. Connect the audio source to the audio input of the HDX-POE-TX unit.
4. Connect the audio output of the HDX-POE-TX unit to the audio input of the display or speakers.
5. Connect the IR receiver to the IR input of the HDX-POE-TX unit.
6. Connect the IR emitter to the IR output of the HDX-POE-TX unit.
7. Connect the CAT5/5e/6 cable from the RJ45 jack of the HDX-POE-TX unit to the RJ45 jack of the HDX-POE-RX unit.
8. Connect the IR receiver to the IR input of the HDX-POE-RX unit.
9. Connect the IR emitter to the IR output of the HDX-POE-RX unit.
10. Connect the HDMI output of the HDX-POE-RX unit to the HDMI input of the display.
11. Connect the power supply to the HDX-POE-TX and HDX-POE-RX units.
12. Power on the HDMI source, display, and speakers.

Note : The RX unit will read the EDID from the monitor and pass the data into the TX unit automatically. Please refer to the user manual for detailed instructions and safety information.

OVERVIEW

Are you extending your HD signal reach and finding that the best potential new locations don’t have the proper power available? You may not have to scale down your plans if you consider using an HDX-POE system from SmartAVI.
HDX-POE injects power into cat5/cat5e/cat6 cable that transports both HDMI and IR and picks it off at the load.

FEATURES

• Supports POE: Can be powered by TX or RX
• Extends HDMI,IR and Power Output over one Cat5/5e/6 Cable
• Extends IR Control Signals for Remote Control
• Full HD support: 1080p@60Hz@48 bit/pixels, 1080p@120Hz@24 bit/pixels, 3D 1080P60Hz and 4K x 2K@30Hz@24bit
• Data Signals up to 3.4Gbps
• HDMI 1.4 and HDCP Compliance
• Uses Bi-Directional IR Communication
• Transmits High-Quality Dolby TrueHD, DTS-HD MA Audio Signals
• Transmits 1080p Resolution Video up to 250 ft

HARDWARE INSTALLATION

1. Power off the HDMI source and display.

2. Connect an HDMI cable from the HDMI source to the HDMI IN port of the HDX-POE transmitter.

3. Connect an IR emitter (optional) to the IR OUT port on the transmitter.

4. Connect the HDX-POE transmitter to the HDX-POE receiver using a CAT5e/6 cable (up to 150 ft).

5. Connect an IR receiver (optional) to the IR IN port on the receiver.

6. Connect an HDMI cable from the HDMI OUT port on the HDX-POE receiver to the HDMI Display.

7. Connect the power on the HDX-POE transmitter plugging in their power adapters (12VDC2A) or provide 12VDC input from the rear DC input port.
   NOTE : If the RX side has connected DC adapter, TX can get the DC power over the CAT5e/CAT6 cable, so leave DC input port empty. Only 1 power supply is required for both units.

8. Power on the HDMI source, displays and speakers. The RX will read the EDID from the monitor, and then pass the datainto the TX automatically.

TECHNICAL SPECIFICATION

VIDEO

Resolution

| 800X600, 1024X768 , 1280X1024,

1366X768, 1920X1200, 480i,

720p, 1080i, 1080p and 3D

Transmission| 70 meters
Color Depth| Deep Color 36/30/24 Bit at 1080p and 3D
Audio Format| Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
IR Range| 38kHz, 56kHz
Video Bandwidth| 10.2Gbps
Input Video Signal| 1.2 Volts P-P
Input DDC Signal| 5 Volts(TTL)
I/O CONNECTOR (TX)

Input

| 1 x HDMI-A 19PIN Socket 5 x 2.5mm

1 x 3.5mm Jack for IR Receiver

Output| 1 x RJ45 Jack

1 x 3.5mm Jack for IR Emitter

I/O CONNECTOR (RX)

Input

| 1 x RJ45 Jack

1 x 3.5mm Jack for IR Receiver 5 x 2.5mm

Output| 1 x 3.5mm Jack for IR Emitter 1 x HDMI-A 19PIN Socket
MECHANICAL
Dimensions| 0.9” H x 2.9” W x 3.7” D
Weight| 0.26 lb
Power| External 12V2.5A
ENVIRONMENTAL
Operating Temp.| 32-104°F (0-40 °C)
Storage Temp.| -4-140°F (-20-60 °C)
Humidity| Up to 85% (non-condensing)
SAFETY
Certificate| FCC, CE, RoHS
Power Adapter| UL, CE, FCC, RoHS

WHAT’S IN THE BOX

Transmitter

HDX-POE-RX| 1| HDMI, IR, CAT5/5e/6

Receiver

Power Supply| 2| PS5VDC2A
Quick Start Guide| 1|

NOTICE

• The information contained in this document is subject to change without notice. SmartAVI makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for particular purpose.
• SmartAVI will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material.
• No part of this document may be photocopied, reproduced, or translated into another language without prior written consent from SmartAVI Technologies, Inc.

800.AVI.2131, 702.800.0005
2455 W Cheyenne Ave, Suite 112
North Las Vegas, NV 89032
SmartAVI.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>