SmartAVI RS-232 Extender Extender User Guide
- June 14, 2024
- SmartAVI
Table of Contents
SmartAVI RS-232 Extender Extender
TECHNICAL SPECIFICATION
VIDEO
Format| DVI-D Single Line
Maximum pixel clock| 165 MHz
Input interface (TX)| (1) DVI-D 29-pin female
Output interface (RX)| (1) DVI-D 29-pin female
Resolution| Up to 1920 x 1200 @ 60 Hz
DDC| 5 volts p-p (TTL)
Input equalization| Automatic
Input cable length| Up to 20 ft
Output cable length| Up to 20 ft
RS- 232
Input interface (TX)| (1) DB9 (Female)
Output interface (RX)| (1) DB9 (Female)
Speed| Up to 115 Kbps
IR CONTROL
Input Interface (TX)| (1) 3.5 mm (Female)
Output Interface (RX)| (1) 3.5 mm (Female)
Frequency Response| 30 KHz to 80 KHz
OTHER
Power| External 100-240 VAC/5VDC4A
Dimensions| 5.125 in W x 1 in H x 3.625 in D
Weight| 1 lb (.5 lbs per unit)
Operating Temp.| 0-55 °C (32-131°F)
Storage Temp.| -20-85 °C (-4-185 °F)
Humidity| Up to 95%
WHAT’S IN THE BOX
PART NO. | Q- TY | DESCRIPTION |
---|---|---|
LDX-S | 1 | DVI-D and RS-232 Extender |
PS5VDC2A | 2 | PS5VD2A Power Supply |
Quick Start Guide | 1 |
NOTICE
The information contained in this document is subject to change without
notice. SmartAVI makes no warranty of any kind with regard to this material,
including but not limited to, implied warranties of merchantability and
fitness for particular purpose. SmartAVI will not be liable for errors
contained herein or for incidental or consequential damages in connection with
the furnishing, performance or use of this material. No part of this document
may be photocopied, reproduced, or translated into another language without
prior written consent from SmartAVI Technologies, Inc.
ABOUT SFX
The LDX DVI extender is capable of sending a DVI-D signal up to 245 ft over a
single conventional and inexpensive Cat5e/6 cable. The LDX extender also
features RS-232 signal extension, enabling long-distance control of displays
or devices.
FEATURES
- Extends DVI-D up to 245 ft from the Source
- Data Recovery for Digital Video
- Supports up to 1920×1200 Digital Video Resolution (@ 60 Hz)
- Supports 4K/2K (3840×2160) video resolution (@ 30 Hz)
- Automatic DDC Learning
- RS-232 Extension Enables Long-Distance Control
- External Power Adapter for Transmitter and Receiver Unit
- Plug-and-Play Ready
HARDWARE INSTALLATION
- Turn off connected devices
- Connect cables between signal source device and TX unit’s input ports
- Connect cables between the RX unit’s output ports and end-point device
- Connect TX and RX via CAT5e/6 cable
- Connect power supply to either TX and RX units
- Turn on TX and RX units
- Return power to connected devices
800.AVI.2131, 702.800.0005 2455 W Cheyenne Ave, Suite 112 North Las Vegas, NV
89032
SmartAVI.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>