UMIDIGI MP32 A15 Ultra Smartphone User Guide
- June 14, 2024
- Umidigi
Table of Contents
MP32 A15 Ultra Smartphone
User Guide
Greetings From UMIDIGI Mobile
This guide will show you how to use the phone and its important functions. You may also visit UMIDIGI’s official website to get more information about the phone. Warning
-
Security information (including BS, ES, and battery security information) of third-party software installation and function may vary in different regions or by different hardware specifications.
UMIDIGI holds a disclaimer for the performance problem or incompatibility caused by third-party 5applications, registry editing, and OS software modifying. Customizing the OS may cause the device or some applications to fail to work properly. -
Do not place the phone or battery near or inside heating equipment, cooking equipment, or high-ressure vessels (such as microwave ovens, induction cookers, electric ovens, heaters, pressure cookers, water heaters, gas stoves, etc.) to prevent the battery from overheating which may lead to an explosion.
-
The original charger, data cable, and battery shall be used. Unapproved chargers, data cables, or batteries that are not certified by the manufacturer may result in electric shock, fire, explosion, or other hazards.
-
When charging, please place the device in an environment that has a normal room temperature and good ventilation, it is recommended to charge the device in an environment with a temperature ranging from 5°C~35°C.
-
The back cover can’t be removed.
How to Restart the Phone
Press the Power Button for a few seconds until the UMIDIGI restart animation
is displayed to restart the phone.
How to Transfer Old Mobile Content to a New Mobile
You can use UMIDIGI Phone to easily transfer photos, videos, music, contacts,
messages, apps, etc from your old phone to the new one in the following three
approaches.
Google Account Backup and Restore
- Ensure that both phones are connected to Wi-Fi and have your Google account signed in.
- On the old phone, go to “Settings” > “System” > “Backup” and ensure that “Back up to Google Drive” is enabled. Back up your data.
- On the new phone, sign in with the same Google account during setup. Your apps, contacts, calendar events, and some other settings should automatically sync and restore.
Transfer Cable
You can use a USB-C transfer cable to directly connect the old and new phones
and transfer data.
Specifications
Model | MP32 |
---|---|
Dimension | 161.9×75.6×7.9(mm) |
Display | 6.67″ FHD+ AMOLED Punch Hole Display 120Hz Refresh Rate 2400×1080 |
Resolution 1000nit Peak Brightness
Processor| MTK Dimensity 9000+ Octa-Core 1 x X2@3.2 GHz + 3 x A710@2.85 GHz +
4 x A510@1.8 GHz Arm Mali G710 MC10
Memory| 16+16GB Extended RAM, 1TB ROM LPDDR5X + UFS3.1
Battery & Charging| 5000mAh 66W Fast Charging Type-C/ USB 3.0
Rear Camera| 200MP Main Camera 50MP Ultra-Wide Camera 8MP Macro Camera
Front Camera| 32MP Front Camera
NFC| Support Google Pay
Hotkey| Yes
Special Functions| IR Blaster & X-axis Linear Motor
Navigation| GPS | Glonass | Galileo | Beidou
Audio| Type-C Audio Jack
Network & Connectivity| Dual Nano-SIM
Network Bands:
2G: GSM: 2/5
3G: WCDMA: 2/5
4G: LTE FDD: 2/5/12/13
4G: LTE TDD: 41
5G: N66
Wireless Networks:
Wi-Fi Protocol: Wi-Fi (802.11ac/a/b/g/n)
Bluetooth 5.3 (not support BLE 2M)
Sensor| G-Sensor
Gyroscope
E-compass
Ambient Light Sensor
Proximity Sensor
Side Fingerprint Sensor
IR Blaster
X-axis Linear Motor
Operating System| Android™ 13
In the Box| 1x UMIDIGI A15 Ultra
1x Protector Film (applied)
1x Phone Case
1x Power Adapter
1x SIM Tray Ejector
1x USB Type-C to Type-C Cable
1x Quick Start Guide
Thanks for choosing UMIDIGI products!
We will always focus on innovation and continue to provide high-quality smart
devices for a better user experience. Please leave us a review of feedback if
you like it. We do appreciate it.
Follow UMIDIGI:
| | |
---|---|---|---
http://youtube.com/umidigi/|
https://vk.com/umidigi|
https://www.facebook.com/Umidigi|
https://twitter.com/umidigi
https://www.instagram.com/umidigi
YouTube: youtube.com/umidigi
VK: vk.com/umidigi
Facebook: facebook.com/umidigi
Instagram: instagram.com/umidigi
Safety Statement
FCC Caution:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISED Warning
Operation of 5150-5250 MHz is restricted to indoor use only.
This device complies with lnnovation, Science, and Economic Development Canada
license-exempt RSS standard(s). Operation is subject to the following two
conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Specific Absorption Rate(SAR) information
SAR tests are conducted using standard operating positions accepted by the
FCC/ISED with the phone transmitting at its highest certified power level in
all tested frequency bands, although the SAR is determined at the highest
certified power level, the actual SAR level of the phone while operating can
be well below the maximum value. Before a new model phone is available for
sale to the public, it must be tested and certified to the FCC/ISED that it
does not exceed the exposure limit established by the FCC/ISED, tests for
each phone are performed in positions and locations as required by the
FCC/ISED. For body-worn operation, this model phone has been tested and meets
the FCC/ISED RF exposure guidelines when used with an accessory designated for
this product or when used with an ccessory that contains no metal and that
positions the handset a minimum of 10mm from the body. Non-compliance with the
above restrictions may result in a violation of RF exposure guidelines.
The E-label information
To access the e-label information, in the device,
Choose: Settings > About phone > Authentication information
In all EU member states, the operation of 5150-5250MHz is restricted to indoor
use only.
BE | BG | CZ | DK | DE | EE | IE | EL |
---|---|---|---|---|---|---|---|
ES | FR | HR | IT | CY | LV | LT | LU |
HU | MI | NL | AT | PL | PT | RO | SI |
SK | Fl | SE | NO | IS | LI | CH | TR |
Manufacturer:
Shenzhen Yumi intelligent Technology Co., Ltd
Add: 406-407 Jinqi Zhou Building,4/F, 1 Tangling Road, Nanshan District,
Shenzhen City, Guangdong Province China
Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>