living co CL-HD521 2200W Hair Dryer Instruction Manual

living co CL-HD521 2200W Hair Dryer Instruction Manual

IMPORTANT SAFETY INSTRUCTIONS

1. Always unplug this appliance immediately after use.
2. Do not use while bathing.
3. Do not place or store this appliance where it can fall or be pulled into a tub of sink.
4. Do not place or drop into water or other liquid.
5. Do not reach for an appliance that has fallen into water. Unplug immediately.
   • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
   • Children should be supervised to ensure that they do not play with the appliance.
   • For additional protection, the installation of a residual current device with a rated residual operating current not exceeding 30mA is advisable in the electrical circuit supplying the bathroom. Ask a registered electrician for advice.
   • If the supply cord is damaged, it must be replaced by the manufacturer of its service agent or a similarly qualified person in order to avoid a hazard.
   • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
   • WARNING: Do not use this appliance near bathtubs, showers, basins or other vessels containing water.

PRODUCT OVERVIEW

• A. Concentrator attachment
• B. Air Inlet Cover (removeable)
• C. Cool Shot Switch
• D. Heat selection Switch
• E. Speed selection Switch
• F. Hanging loop
• G.Diffuser attachment

NOTE: for air inlet cover (B), rotate the cover counterclockwise to open. Always ensure the cover is clean / dry and refitted before operating the appliance.

HOW TO USE YOUR HAIR DRYER

1. Make sure that your hands are completely dry and that the switch is set to the OFF position.
2. Take the supply cord plug and insert into a socket outlet.
3. Use the control switches to set the desired heating and airflow.
4. Aim outlet at your hair and move the dryer along the length of your hair in a steady motion.
5. Once you have finished switch to the OFF position and remove the supply plug from the socket outlet.

Heat selection switch

Position low temperature
Position medium temperature gentle drying and shaping
Position high temperature for rapid drying

Speed selection switch

Position 0 OFF
Position gentle stream of air
Position strong stream of air

Cool switch

With this switch you can temporarily stop the heating and allow cool air flow.

Concentrator / Diffuser attachments:

These attachments clip onto the end of the hairdryer outlet nozzle, simply align and use a push force to lock into position, remove by applying a pull force.

Concentrator: Allows the airflow to be more targeted, used for drying specific sections at a time
Diffuser: Allows the airflow to be more dispersed, which can assist to reduce frizz and achieve a more natural pattern.

CLEANING

• WARNING- always unplug your appliance before cleaning.
• The air inlet grille can be removed by simply twisting counterclockwise to unclip, use a damp cloth to remove dust buildup, ensure clean and dry before refitting by rotating clockwise to lock into position.
• Your hair dryer requires very little attention. You can clean it, together with its accessories, using a slightly damp cloth to remove hair or impurities trapped in the rear grid.
• Never clean your appliance with alcohol based cleaners.
• Never immerse your appliance or its accessories in water.
• Carefully dry all parts you have just cleaned.

PROTECTION AGAINST OVERHEATING

• Ensure that the air inputs and outputs are not blocked as thiscan cause internal overheating and possible damage.
• In the case of severe blockage or air restriction, the inbuilt thermal temperature limiter will shut off the heating element. This device is self-resetting and will reset once the unit has cooled down to a normal operating temperature.

PECIFICATIONS

220-240V~50-60Hz 1800-2200W, DC Motor

DISPOSAL

Correct Disposal of this product

This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. Contact your local council to locate a suitable recycling facility in your area.

Warranty

We pride ourselves on producing a range of quality home appliances that are both packed with features, and completely reliable. We are so confident in our products, we pack them up with a 2 year warranty. Now you too can relax knowing that you are covered.

Customer Helpline

NZ: 0800 422 274 This product is covered by a 2 year warranty when Accompanied by proof of purchase. IM Version 1.0 – June,2021

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>