nedis DUMSTV10BK Dummy TV Simulator with Flashing LED and USB Power Plug User Manual
- June 14, 2024
- nedis
Table of Contents
DUMSTV10BK
Dummy TV simulator
DUMSTV10BK Dummy TV Simulator with Flashing LED and USB Power Plug
Description
1. Functionswitch| • On position
• Dusk + 4 or + 7 hours: When exposed to light, the device will simulate a
color television set flickering light for 4 or 7 hours.
• Off position
---|---
2. Dusk sensor| • The dusk sensor must be exposed to darkness and changes in
lighting.
3. Power inlet|
4. LED panel| • 2 blue lights: The device is set on ‘Dusk + 4 hours’.
• 3 green lights: The device is set on ‘Dusk + 7 hours’.
5. Base| • Adjust the base to make sure that the lights that are projected on
the walls and the ceiling are visible from outside.
6. Wall mounting holes| • Make sure that the device is not visible from
outside.
Safety
General safety
- Read the manual carefully before use. Keep the manual for future reference.
- The manufacturer is not liable for consequential damages or for damages to property or persons caused by nonobservance of the safety instructions and improper use of the device.
- Only use the device for its intended purposes. Do not use the device for other purposes than described in the manual.
- Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace the device immediately.
- The device is suitable for indoor use only. Do not use the device outdoors.
- The device is suitable for domestic use only. Do not use the device for commercial purposes.
- Do not use the device in locations with high humidity, such as bathrooms and swimming pools.
- Do not use the device near bathtubs, showers, basins or other vessels containing water.
- Do not use a timer or a separate remote-control system that switches on the device automatically.
- Do not cover the device.
- Keep the device away from flammable objects.
Electrical safety
- To reduce risk of electric shock, this product should only be opened by an authorized technician when service is required• Disconnect the product from the mains and other equipment if a problem should occur.
- Do not use the device if the mains cable or mains plug is damaged or defective. If the mains cable or mains plug is damaged or defective, it must be replaced by the manufacturer or an authorised repair agent.
- Before use, always check that the mains voltage is the same as the voltage on the rating plate of the device.
- Do not move the device by pulling the mains cable. Make sure that the mains cable cannot become entangled.
- Do not immerse the device, the mains cable or the mains plug in water or other liquids.
- Do not leave the device unattended while the mains plug is connected to the mains supply.
- Do not use an extension cable.
Support
If you need further help or have comments or suggestions, please visit
www.nedis.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>