Westfalia 959889 3in1 Telescopic Hedge Trimmer and Chainsaw Instruction Manual

Westfalia 959889 3in1 Telescopic Hedge Trimmer and Chainsaw

Product Information

• Product Name: 3tlg. Teleskop Elektro Garten-Set GM EMT 500/750 T
• Product Code: Art. 95 98 89
• Original Instructions: DE, EN, NL, FR, IT
• Nominal Speed: N/A
• Chain Speed: N/A
• Rated Voltage: N/A
• Rated Frequency: N/A
• Rated Power: N/A
• Protection Class: N/A
• Weight + Handle Weight: N/A
• Sound Pressure Level: N/A
• Sound Power Level: N/A
• Hand-Arm Vibration: N/A
• Operating Height: N/A
• Oil Tank Capacity: N/A
• Guide Bar: N/A
• Saw Chain: N/A
• Cable Length: N/A
• Tandafstand: N/A
• Max. Snijdikte: N/A
• Lengte messenbalk: N/A
• Max. Snijlengte: N/A

Product Usage Instructions

1. Put on the tool by following the instructions in the user manual.
2. Hook in the tether strap to secure the tool.
3. Pivot the hedge trimmer as needed.
4. Switch on the tool to start using it.

Note: The vibration and noise levels may vary depending on the usage and workpiece. It is important to take safety measures to protect the operator, such as wearing gloves, limiting working time, and using accessories in good condition to reduce vibration exposure.

OVERVIEW

1. Hedge trimmer
2. Lock
3. Mains plug
4. Handle with switch
5. Carrying strap
6. Locking telescopic handle telescopische handgreep
7. Chain tensioner
8. Oil tank

TECHNICAL DATA

(High pruner)

KwA = 3 dB(A)

Hand Arm Vibration| ah = 2,2 m/s² K = 1,5 m/s²
Operating Height| 2,15 m
Oil Tank Capacity| 90 ml
Guide Bar| 270 mm (8“)  0,05“ =

1.3 mm (M1500836-

1041TL)

Saw Chain| Titan 3/8“LP-050“-36

(Art. 95 07 56)

Cable Lenght| 350 mm

(Hedge trimmer)

• The declared vibration total value and the declared noise emission values have been measured in accordance with a standard test method and may be used for comparing one tool with another. The declared vibration total value may also be used in a preliminary assessment of exposure.

Warning!

• The vibration and noise emission during actual use of the power tool can differ from the declared total value depending on the ways in which the tool is used, in particular, what kind of work piece is machined.
• It is necessary to identify safety measured to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time)
• Try to minimize the impact of vibration and noise. Exemplary measures to reduce vibration exposure include wearing gloves while using the tool, limiting working time, and using accessories in good condition.

Dear Customers,

• Instruction manuals provide valuable hints for using your new device. They enable you to use all functions, and they help you avoid misunderstandings and prevent damage. Please take the time to read this manual carefully and keep it for future reference.

1. Unbox device
2. Putting on the tool
3. Telescoping
4. Hook in tether strap
5. Pivoting the hedge trimmer
6. Fill oil tank
7. Change saw chain
8. Tension saw chain
9. Limbing
10. Switch on

SYMBOLS

• Attention! Observe the warning notes.
• Attention! Beware of falling objects.
• Attention! Do not grasp into the cutting bar resp. the saw chain during work.
• Immediately unplug the power cord from mains, if the cord cable is damaged or cut.
• Wear head, eye and hearing protection.
• Attention! Make sure uninvolved person cannot be injured by objects thrown from the garden tool during work.
• Wear protective gloves.
• Wear sturdy shoes.
• Protect the device from rain.
• Keep a distance of at least 15 m to uninvolved persons.
• Do not cut in the vicinity to power lines. Keep a distance of at least 15 m to voltage-carrying lines.

SAFETY NOTES

• Please note the included General Safety Notes and the following safety notes to avoid malfunctions, damage or physical injury.
• Please note all warning symbols. The symbols indicate instructions which are important for safety reasons. Always observe these instructions as failure to do so could result in serious injury!
• Keep the manual always ready to hand when working with the electric garden tool.
• Children and persons with limited physical, sensorial or mental abilities are not allowed to use the garden tool. The electric garden tool may only be operated by briefed persons.
• Keep bystanders and animals out of the work area. Bystanders should keep a minimum distance of 15 m when you start or operate the garden tool.
• Do not use the unit when your reactivity is affected by alcohol consumption, medication, drugs, illness or when you are tired. One moment of inattention when operating the unit can cause severe injuries.
• Do not use the garden tool as a lever for lifting, moving or splitting objects.
• Observe all accident prevention regulations.
• Cutting with the electric garden tool when standing on a ladder, in a tree or in any other instable places in not allowed. Always make sure you stand on a firm base and cannot loose balance when using the electric garden tool.
• Always inspect the electric garden tool before each use for worn, loose, or damaged parts. Never operate a garden tool that is damaged, improperly adjusted, or is not completely and securely assembled.
• While clearing the area around the tree, arrange a good foothold and a secure retreat path from falling branches and limbs.
• Make sure that the attachment stops moving when the switch is released. First shut off the garden tool and then set it down.
• The garden tool may only be used by one person at a time. Make sure bystanders or animals are not in the garden tool’s area of swing.
• Make sure the garden tool is not touching anything and moving free when starting the engine. Keep all parts of your body away from the cutting attachments while the engine is running. Keep the handles dry, clean and free of oil.
• Use only original accessories and original replacement parts.
• Use extreme caution when cutting small size brushes and saplings because flexible material can be jammed in the saw chain and whipped towards your body to cause injuries or pull you off balance.
• Do not modify the electric garden tool in any way.
• Do not carry the garden tool with the attachments facing forward.
• Protect the electric garden tool from moisture.
• Should the electric garden tool become damaged do not use it and have it repaired by a professional or contact our customer support department. Do not disassemble the garden tool or try repairing it yourself.

Electrical Safety

• Make sure the power cord cannot get into the cutting area. Keep the cord away from oil, heat and sharp edges.
• Never carry the gardening tool by the cord and always grasp the plug to unplug from the wall socket. Carry the gardening tool by the handle when the cutting bare is idle. Always fit the blade protection when carrying or storing the gardening tool. Careful handling with the tool reduces the risk of injury.
• Do not pull the gardening tool by the cord. Make sure the power cord cannot get caught in any way.
• When cleaning, maintaining and not in use always switch off and disconnect from power mains. Use only extension cables which are approved for outdoor operation. Use approvable extension cable with a cable quality of H07RN-F; 3×1.5 mm2. Ask your electrician.
• For using the gardening tool, we recommend the use of an RCD with a residual current < 30 mA. In Switzerland the utilisation of an RCD is obligatory.

Safety Precautions against Kickback and Pushback

• Always keep the saw chain sharp. This will ensure a high level of safety against kickback and throwback. Removal of any safety devices, inadequate maintenance or incorrect mounting of the guide bar and saw chain will increase the safety risk and lead to serious injuries due to kickback.
• For safety reasons do not use any other saw chain or guide bar types not specified in this manual.
• Kickback is the upward motion of the guide bar that occurs when the saw chain tip contacts a hard object. Kickback is dangerous and can lead to loss of control of the device.
• Before cutting logs, secured in position. When working on sloping ground, make sure to work facing upwards.

Personal Safety Equipment

• When working with the electric garden tool, wear eye protection, protective gloves and hearing protection. Wear cut-proof and tight-fitting clothes and safety boots. When working with the saw wear protective head gear.
• ven in case of appropriate use of the chain saw some risk remains. Potential human health hazards can be:
• Cuts due to contact with an unprotected saw chain or when touching a moving saw chain or the cutter bar of the hedge trimmer.

EC DECLARATION OF CONFORMITY

• satisfies the essential protection requirements set out in the European directives and their changes are set.
• is according to the basic requirements, which are defined in the European Directives and their amendments.

CUSTOMER SERVICES

• Westfalia
• Werkzeugstraße 1
• D-58093 Hagen
• Telefon: (0180) 5 30 31 32
• Telefax: (0180) 5 30 31 30
• Internet: www.westfalia.de

DISPOSAL

• Dear Customer
• Please help avoid waste materials.
• If you at some point intend to dispose of this article, then please keep in mind that many of its components consist of valuable materials, which can be recycled. Please do not discharge it in the rubbish bin, but check with your local council for recycling facilities in your area.

References

• Westfalia Versand Österreich | Werkzeug ✓ Garten ✓ Technik ✓ & mehr
• Westfalia Versand Schweiz | Werkzeug ✓ Garten ✓ Technik ✓ & mehr
• Westfalia Versand Deutschland | Werkzeug ✓ Garten ✓ Technik ✓ & mehr

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>