tp-link USB Type-C to RJ45 Gigabit Ethernet Network Adapter User Guide
- June 7, 2024
- tp-link
Table of Contents
User Guide
Model No.UE300C, UE300, UE330, UE200
This adapter supports Plug and Play feature. Plugin and wait for seconds.
Then this adapter is ready to use.
* UE300C:*
For Windows 7/8/8.1, Mac OS X 10.8, and older versions, please download and
install a driver from our official website: www.tp-link.com, and search the model No.
UE300, UE330 and UE200:**
For Windows 7/8/8.1, please click to install a driver if prompted to do so.
For Windows 7, please click CANCEL if prompted “The program might not have
installed correctly” after installation.
For Mac OS X 10.8 and older versions, please download and install a driver
from our official website:
www.tp-link.com, and search model No.
LED Indication
LED (for UE330)| Status| Indication
White| On| The adapter is properly connected and the hub is ready to use
Yellow| On| The Ethernet cable is properly connected
Green| Flashing| Network data is being transferred
LED (for UE300C, UE300, UE200)
White| On| Both the adapter and Ethernet cable are properly connected
White| Flashing| Network data is being transferred
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/30/EU,
2014/35/EU, 2009/125/EC, 2011/65/EU, and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tp-
link.com/en/ce
ATTENTION
♦ When a product has a power button, the power button is one of the ways to
shut off the product; when there is no power button, the only way to
completely shut off power is to disconnect the product or the power adapter
from the power source.
♦ Don’t disassemble the product or make repairs yourself. You run the risk of
electric shock and voiding the limited warranty. If you need service, please
contact us.
♦ Keep the device away from water, fire, humidity, or hot environments.
♦ This USB Adapter can be powered only by computers that provide ES1 and
comply with Limited Power Source(LPS) or PS2.
Recycling
This product bears the selective sorting symbol for waste electrical and
electronic equipment (WEEE).
This means that this product must be handled pursuant to European directive
2012/19/EU in order to be recycled or dismantled to minimize its impact on the
environment.
The user has the choice to give his product to a competent recycling
organization or to the retailer when he buys new electrical or electronic
equipment.
To communicate with TP-Link users or engineers, please visit
https://community.tp-link.com to join TP-Link Community.
For technical support, replacement services, the user guide, and more
information, please visit https://www.tp-link.com/support, or simply scan
the QR code.
If you have any suggestions or needs for our product guides, you are welcome
to email techwriter@tp-link.com.cn.
http://www.tp-link.com/support
©2020 TP-Link 7106508740 REV4.0.0
References
- 域名售卖
- WiFi Networking Equipment for Home & Business | TP-Link
- TP-Link Community
- CE Regulatory Compliance | TP-Link
- TP-Link Product Support - Wireless Networking Equipment Support