BOYA BY-XM6 S1-Mini Wireless Lavalier Microphone User Guide

Ultracompact 2.4GHz
Dual-Channel Wireless
Microphone System
BY-XM6-S1 Mini
BY-XM6-S2 Mini
User Manual

General Introduction

BOYA BY-XM6 S1/ 52 Mini kit is an increc ultracompact and easy-to-use wireless microphone system for up to2 people.
The microphone delivers exceptional, broadcast-quality sound to DSLR, mirrorless and video cameras, smartphones, tablets, computers, etc.
The kits are ideal for content creation, viogging, mobile journalism, and more.

Available Kits

Cautions

1. Disintegration of this device by non-professionals is strictly prohibited.
2. Please keep it away from heat sources such as heaters or ovens.
3. Do not remove the battery without professionals’help.
4. Please clean the device with only a soft, dry cloth.
5. When using and storing, please pay attention to dust and mosture.
6. For the best pick-up pattern, do not hold your hand against the microphone capsule cover.

Product Structure

Wireless Transmitter BY-XM6 TX Mini

1. Status indicator
   Mode| Indicator
   ---|---
   Unpaired| Blinks blue slowly (per second)
   Pairing| Blinks blue quickly
   Paired Successfully| Static blue light
   Mute ON| Blinks red slowly (per second)
   Charging| Red light off
   Mute OFF| Blinks blue twice quickly
   Maximum/Minimur Gain| Blinks red quickly
   Low Battery| Static red light
   Fully Charged| Red light off
2. Charging contacts
3. Beltclip
4. Power/Mute button
   Function| Operation
   ---|---
   Power ON| Pressand
   Power OFF| hold for 35
   MuteON| Short press
   Mute OFF

5. +-/Pair button
   – Press +/- button to adjust mic gain.
   (The setting is retained even after the power is turned off) – Long press the Pair button for 3s (press both“+”and ” buttons at the same time) to enter pairing mode.

6. USB-C charging port (DC 5V) – Use the supplied USB-C charging cable to charge the unit.
   

7. Built-in microphone

Wireless Receiver BY-XM6 RX

1. OLED display
   – For more details, please refer to“OLED Display Operation Guide”

2. Beltclip

3. Charging contacts

4. Power/Mute button
   Function| Operation
   ---|---
   Power ON| Pressand
   Power OFF
   MuteON| Short press
   Mute OFF

5. +/SET button
   Function| Operation
   ---|---
   +| On home screen, short press to increase output volume.
   Onmenu screen,short press to select different functions. or values shown on the display.
   SET| On home screen, long press to enter the menu screen.
   On menu screen, long press to enter the displayed menu. ‘Then, long press again to confirm your option.

6. button
   -On home screen, short press to decrease output volume.
   -On menu screen, short press to select different functions or Values shown on the display;
   – Long press to return to home screen.

7. USB-C charging port (DC 5V)

8. 3.5mm headphone output
   – Connect headphones for audio monitoring.

9. LINE OUT jack
   – Connect the BY-XM6 RX to a smartphone, tablet, camera, recorder or mixer with the supplied output cables

OLED Display Operation Guide

Wireless Receiver BY-XM6 RX Home screen
If no operation is performed within 20 seconds on other screens, the display will automatically return to home screen.

1. Pairing indicator Paired successfully Disconnected Pairing

2. RX’s output mode M:Mono ~ S: Stereo

3. 0utput volume & Mute indicator on home screen, press +/- button to adjust the output volume.
   MuteON Mute OFF

4. RX’s battery level indicator Displays the RX battery level. Please recharge the device immediately when the indicator starts flashing.

5. Audio input level meter Displays the audio input level.

Menu screen
On home screen, long press SET button to enter menu screen.
On menu screen, long press – button to return to home screen.

Connect Setting
Pair with the transmitter. For details of operation, please refer to “Operation Guide”

Backlight Setting
Set backlight to always on or on for 10/30/60 seconds. Default is “On’.

Mute Key Setting
Enable or disable mute key button fun Defaultis “Enable” ction.

Output Volume Setting
Output volume can be set from 010 6. Defaultis ”

Output Mode Setting
The output mode can be set to either mono or stereo. When in mono.
mode, the audio from the transmitter, or transmitters will be mixed to both the left and right sides. When in stereo mode, the two transmitters’audio output will be separated to the left and right sides. Defaultis mono.

Language Setting
English or Chinese are available.
Default s English.

Operation

For the BY-XM6-51 / BY-XM6-52 Mini Kit

1. Long press the power button to turn on the transmitter and the receiver.

2. Pairing Before leaving factory, the system is pre-paired. Therefore, the connection will be established once they are powered on. If they are disconnected, please follow below steps:
   (1) Long press the SET button to make the receiver enter menu screen.
   (2) Use the + or -button to display the Connect setting menu on receiver.(3 Long press the SET button to select the menu.@ Select Yes, and long press the SET button to confirm.
   5 Press and hold the TX Mini’s pair button (+, ) for 3s at the same time to enter pairing mode. The indicator wil flash blue rapidly.
   Transmitter and receiver will be successfully paired within 10s. The indicator of the transmitter will turn static blue, while the indicator on the receiver will change to

3. Connect the receiver to the mic input of a camera, recorder or mixer with the supplied 3.5mm TRS to TRS cable. Or connect the RX to a smartphone, tablet, or computer with the supplied 3.5mm TRS to TRRS cable.

4. You are ready to record.

Note: Due to 2.4GHz wireless frequency, signal can be easily attenuated. Please try to avoid obstacles, such as walls and buildings, and avoid close proximity to devices with 2.4GHz signal, such as high-power Wi-Fi antennas, radios, etc.

Specifications

BY-XM6 TX Mini Transmitter

BY-XM6 RX Receiver

3.5mm TRS Output Jack
Audio Output Level| —60 dBV to -20dBV
Power Requirements| Built-in Li-ion Battery or USB-C DC 5V or Charging Contact
Built-in Battery Life| Approx. 7 hours
Antenna| PIFA Antenna
Weight| Approx. 32g(1.13oz)
Dimensions| 62.1×31.6×16.5mm
Operating Temperature| —10°C to 50°C
Storage Temperature| —20°C to +55°C

Features

– 2.4GHz wireless transmission technology
– Ideal for content creation, viogging, mobile journalism, and more
– Delivers exceptional, broadcast-quality sound
– Ultracompact mini clip-on transmitter and dual-channel receiver
– Easy-to-use OLED display
– Real-time headphone monitoring
– Operating range of up to 100m
– High-quality built-in microphone
– Selectable mono/stereo output

Packing List

BY-XM6-51 Mini Kit
1x BY-XM6 TX Mini Transmitter
1x BY-XM6 RX Receiver
2x USB-C Charging Cable
1 Fur Windshield for Built-in Microphone
1x 3.5mm TRS to TRS Output Cable for Cameras
1% 3.5mm TRS to TRRS Output Cable for Smartphones.
BY-XM6-52 Mini Kit
2x BY-XM6 TX Mini Transmitter
1 BY-XM6 RX Receiver
3% USB-C Charging Cable
2x Fur Windshield for Built-in Microphone
1x 3.5mm TRS to TRS Output Cable for Cameras
1x 3.5mm TRS to TRRS Output Cable for Smartphones

1F0300300490

Documents / Resources

| BOYA BY-XM6 S1-Mini Wireless Lavalier Microphone [pdf] User Guide
BY-XM6, S1, 2mini, BY-XM6 S1-Mini, BY-XM6 S1-Mini Wireless Lavalier Microphone, Wireless Lavalier Microphone, Lavalier Microphone, Microphone
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>