CHESONA 8618 Magnetic Wireless Floating Keyboard with iPad Pro 11 User Manual

CHESONA 8618 Magnetic Wireless Floating Keyboard with iPad Pro 11 User

Manual

User Manual

Magnetic Wireless Keyboard

Compatible with
iPad Pro 11
iPad Air 10.9

Technical Support

If you have any issues or questions, let us know as soon as possible! We would love to get you taken care of and happy right away! All units come with a full 12 month warranty, so you can relax and take comfort in your purchase.

Please contact us (not Amazon) for the best and most responsive after-sales support, by

1. Email:support@chesona.com
2. Chat:www.chesona.com

Compatibility

Compatible with iPadOS 13(and newer).We recommend updating your iPadOS to 13.4.1 for best performance.

To check your iPad system version:

1. Go to Settings > General > About > Software Version.
2. Please update your device to version 13.4.1 or newer to get proper access to the touchpad function.

To upgrade your iPadOS to the leatest version:

1. Open your device’s Settings >General> Software Update
   

2. Tap “Download and Install”
   *If you see Resume Download, tap that instead.

Setup

To pair with your iPad:

1. Switch ON/OFF to ON position.

2. Long press and the Bluetooth indicator starts to flash

3. Toggle “Bluetooth On” in the “Settings” app, (device is connected when Bluetooth indicator stops flashing).
   

4. Tap on “Bluetooth 5.1 Keyboard” under “My Devices” in the “Bluetooth”
   section of the “Settings” app
   *When pairing with a new device, repeat steps 1-3
   Pairing process is considered complete after “Connected” indicator appears.

If your system is 13.3.1, please follow the steps below to enable the touchpad function:

1. Go to Settings > Accessibility > Touch
2. Make sure the Assistive Touch option is turned on
   

Shortcut Map

Touchpad Function

Notice: Make sure bluetooth connected and touchpad function turned on !

Installation and Removal

Gently attach the iPad to the back cover

Pull up the iPad and remove it from the back cover

Charging

1. Turn on the keyboard. (If the battery indicator is flashing, please charge the keyboard.)
   

2. Plug the charging cable (included) into the keyboard and power adapter (not included, recommend to use your own iPad or iPhone adapter.)
   a) The indicator light turns red when the keyboard is charging.
   b) When charging is complete, the battery indicator turns green.

Troubleshooting

If the keyboard is not working properly, please check the following:

1. The Bluetooth function of the iPad (or other Bluetooth device) is enabled.
2. Bluetooth keyboard within 33 feet.
3. Bluetooth keyboard is full charged.
4. Make sure the keyboard is turned on. (The battery indicator is on.)
5. Make sure the keyboard is paired via bluetooth.

If you don’t need autocorrect or “.” shortcut, follow these steps:

1. Open the Settings app > General > Keyboards > Hardware keyboard.
2. Toggle OFF Auto-Capitalization,Auto-Correction,and”.” shortcut(please refer to the picture below).
   

If Bluetooth pairing fails, please try the following steps:

1. Long press for more than three seconds, the red, green and blue indicators flash three times, and then the keyboard returns to the factory settings
2. Remove all Bluetooth devices on your iPad;
3. Switch off the Bluetooth function on your iPad;
4. Reboot the iPad:
5. Turn on the Bluetooth on your iPad;
6. Switch the keyboard off and on;
7. Repeat the steps described on pages 2 and 3 to pair the keyboard.

Product Specs

Operation distance: 10 meters (33 feet)
Modification system: GFSK
Operating voltage : 3.0-4.2V
Operating current : 9mA (without backlight) / 110mA (backlight)
Sleeping current : <40μA
Charging current: <450mA
Continuous working time without backlight: 400 hours
Maintenance: Please save room temperature, charge at normal voltage
Backlight continuous working time: 7 hours
Backlight hibernation time: 30 seconds
Keyboard dormant time: 10 minutes
Charging time: <4 hours
Charging voltage: 5V
Key life: 3 million times
Work temperature: -10+55 °C

Compliance

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not occur in particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the flowing measures:

• Reorient or relocate the receiving antenna;
• Increase the separation between the equipment and receiver;
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules.Operation is subject to he following two conditions:

1. this device may not cause harmful interference.
2. this device must accept any interference received .including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>