CHESONA JP400 Wireless Keyboard User Manual

CHESONA JP400 Wireless Keyboard User Manual

Packing Included

1 x Detachable wireless keyboard case for iPad Pro 12.9 5th/4th/3th Gen Packing Included
1 x USB charging cable ( No Charger)
1 x User manual

Operation Instruction

1. D Slide the key to “ON” to turn on the keyboard power.
   

2. Press FN and C key together, the BT indicator light will flash.
   

3. Open BT on your iPad.
   

4. Search keyboard name (BT 3.0 Keyboard) for matching device to keyboard.
   

5. The connection is successful, the BT indicator stop flashing.
   

Note:

The keyboard will automatically go into power savings mode after 10 minutes of inactivity. Press any key and wait 2-3 seconds to wake the keyboard.

Specifications

How to change the backlight color

Backlight control

Operation Instruction

1. Slide the key to “ON” to turn on the keyboard powe,
   

2. Press FN and C key together, the BT indicator light will flash.
   

3. Open BT on your iPad.
   

4. Search keyboard name (BT 3.0 Keyboard)for matching device to keyboard.
   

5. The connection is successful, the BT indicator stop flashing.
   

Note:

The keyboard will automatically go into power savings mode after 10 minutes of inactivity. Press any key and wait 2-3 seconds to wake the keyboard.

Specifications

Second Connection

1. You just need to press any key and wait 2-3 seconds to wake the keyboard. It will automatically go into power savings mode after 10 minutes of inactivity, (No need to click “BT 3.0 Keyboard” and press “Fn+C” key. Otherwise, it will show not connect) If you press “Fn+C” or “BT 3.0 Keyboard” key again before you wake the keyboard up, it will cause connection failed.

2. If you still can’t connect for the second time:
   ~ Click “Forgive this device” to delete the “BT 3.0 Keyboard” signal on the iPad.
   ~ Shutdown your iPad and keyboard, and restart them, pair it follow the steps of the first.

3. If your problem has not been resolved or other issues, please contact us via our After-sales Email :chesonaus@163.com

Indicator Light

Remarks:

1.  Fully charge your keyboard, or charge it for more than 2 hours, before using it for the first time.
2.  If the battery power is less than 20%, the power indicator will flash continuously, you need to charge it in time to avoid problems .

Charging

Before first using, charge the keyboard fully. To charge the keyboard:

1. Locate the micro-USB cable from the package or use your own.
2. Plug in the micro-USB (small tip) into the keyboard and the other end into a USB port.

Installation and Removal

1. Removing back protective piece: hold iPad on both sides and use thumbs to gently push off the back cover (see photo.) Cover is held in place by two tabs.
   

2. Proceed to “peel” cover away from iPad.
   

3. Take iPad out
   

4. Take iPad out upwards.
   

If the keyboard is not working correctly, please check the following:

1. The BT function on the iPad (or other BT devices) is enabled
2. The BT keyboard is within 33 feet
3. The BT keyboard is charged If certain keys or commands begin to fail, work sporadically or lag in response time, please restart your iPad (power on and power off).
   This fixes 99% of these types of issues. If a problem persists, please try the following steps:
   – Delete all the BT devices on the iPad
   – Switch off the BT function on the iPad
   – Reboot the iPad
   – Switch on BT on the iPad
   – Switch the keyboard off and on
   – Repeat the steps on pages 1 and 2 to connect the keyboard

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>