Allesgute IP44 Outdoor Wall Lights User Manual
- June 2, 2024
- Allesgute
Table of Contents
Allesgute IP44 Outdoor Wall Lights
Package Included
Recommended mounting height :1.5-2m
Sensor Must Know
- Lighting Duration: The time that the fixture will be lighted after an activation.
- Activation LUX Level: When the environment illumination level is less than the setting value, the light fixture will be activated by a capture of human movement.
Note: The default Distance of Sensitivity is 7m and is not adjustable.
Important Notice on Sensor Setting
- Please ONLY softly adjust the setting within the permitted phase A of Each Setting Screw.
- The two Setting Screws will be possibly SLIPPED and lose their function if operated outside phase A (Counterclockwise from 4:30 to 7:30)
- Note: The sensor head ( the opal mask) should be fully exposed and not to be covered by the eyelid cover.
A Fine Tuning for A Better Sensor Performance
- Tuning the Lighting Duration Screw from(+) to ) (-) to decrease the lighting up duration and vice versa. The Duration Time within 1 minute is not recommended.
- If user needs the light to be lighted up in earlier time at the end of daylight, the Setting Screw should be adjusted from(-) to(+) and vice versa.
This fixture have two modes: Day and Night Mode (works all the day, default is this mode), Night Mode (only works at night).
Installation Steps
Preparation works:
- Installation shall be done by qualified technician only.
- Ensure power is off before all operations.
- Bore a hole in the round rubber to pass the wire. Fix the hanging plate on the wall with screws.
- Pull out the power cables from the wall, and correctly fix them to the cable connector.(N: Neutral, L: Live)
- Slowly screw the bulb back into the lampholder in a clockwise manner.
- Lock the lampshade to the hanging plate by screws.
Contact us anytime
- hiledservice@outlook.com
- Contact us on Amazon directly
- Scan the QR code on the right to contact us
Read User Manual Online (PDF format)
Loading......