elina PILATES Mentor Reformer with Tower Instruction Manual
- June 17, 2024
- Elina Pilates
Table of Contents
MENTOR CON TORRE
Mentor Reformer with Tower
USA
Assembly instructions
elinapilates.com
|
---|---
https://youtu.be/9W-RqDVheHc| https://youtu.be/TOsCp2rl_GQ
Important
This manual contains assembly instructions and safety information.
Please read this manual before using your reformer and keep it for future
reference. If you do not follow the instructions and safety warnings, you can
suffer a serious injury.
Warning
This reformer is designed to be used indoors.
Use your reformer with caution, especially when your exercise is based on the
resistance of the springs.
If you are an inexperienced or first-time user, use your reformer under the
supervision of a professional.
Make sure that your clients or patients receive proper instruction before
using the reformer.
MPROPER USE OF THE REFORMER CAN CAUSE SERIOUS INJURY. TO REDUCE THE RISK:
- Before any exercise, consult a physician.
- Stop exercising immediately if you feel pain in your chest, weakness, breathing difficulty or discomfort.
- Before using the equipment, read and follow the safety instructions and perform your exercises under professional supervision.
- Use the equipment only for the intended exercises.
- Do not use the equipment if it appears to be worn, broken or damaged.
- Do not attempt to repair the equipment yourself without contacting Elina Pilates.
- Make sure that the springs are fully assembled at both ends.
- Aspring that is only half closed runs the risk of loosening with great force.
- When you are using the push bar with the springs, a trained professional should keep one hand on the bar.
- Keep your body, clothing and hair free of any targets that could get caught.
- Make sure the equipment is properly adjusted for your size and skill level.
- For optimal performance, allow at least 60 cm of clearance on each side of the reformer.
- Before moving the reformer, make sure that the ropes do not drag, that the springs are secure and the carriage Is safe.
- The reformer should be used by a single person weighing no more than 350 Ibs / 159 kgs.
- Do not allow children to use or be near to the reformer without adult supervision.
- This equipment must be installed on a level and stable floor.
Mentor with Tower includes:
- Reformer Mentor: structure + trolley. Wo
- Springs: Springs: 2 light (yellow), 2 medium (green) and 2 strong (red).
- Extra wide padded box that facilitates its placement between the shoulder pads and the supports.
- Removable and adjustable shoulder pads.
- Jumpboard, extra wide box and padded foot bar.
- Padedd foot platform.
- A set of ropes.
- Front foot strap: Foot strap on the front of the reformer.
- Non-slip sheet.
- Automatic rope storage retractable system.
- 4-position trolley brake.
- 1 set of hand handles and one set of double loop hand and foot handles.
- Pulley bar with quick change of height, width and removable.
- Padded foot bar with 7-position “Quick release” changeover.
- The tower includes:
- Non-slip push bar safety strap.
- Maple wood roll-down bar.
- Springs: 2 short light (yellow), 2 short medium (green), 2 long light (yellow), 2 long medium
- (green).
- 1 set of simple foot grips.
- Mat to cover the surface of the reformer
Reformer Assembly
We start by opening the safety latches on the reformer box packaging with the help of a screwdriver and a hammer.We take the structure out of the box, put the legs on the floor and take out the different components
- Jumpboard..
- Double carabiner.
- Foot Strap
- 1 set of double loop hand and foot handles.
- 1 set of soft hand handles.
- 1 Shoulder pads and sticks.
- Mat
- Safety strap for push bar.
- 1 set of single foot grips.
- Springs: 2 light short (yellow), 2 medium short (green).
- Springs: 2 light long (yellow), 2 medium long(green).
- Roll-down bar.
- Tower.
Place
the sholder pads on the trolley headboard, choosing the desired shoulder
spacing, and adjust the spica of the shoulder pad supports as much as
possible. 
We put the foot bar at the height we want. To
do this, the first thing to do Is to raise It.
We release the adjustment
wheels on both sides and now we can move the footbar along the reformer
structure. We place it at the height we want and tighten the adjustment
wheels. 
We remove all the components of the tower and
proceed to place it. 
We fit the tower that includes the
pulleys to the reformer structure, fixing them with the anchoring pieces.
We adjust the pulleys to the desired height with the adjustment
wheel.
We use the retractable rope system to easily
adjust the desired length of the rope, as it retracts automatically. We simply
pull it and leave it at the desired length. 
We pass the ends of the ropes
through the pulleys and adjust the length by using the setscrews that allow us
to regulate it. Here we can place the handles of our choice. 
Place the double carabiner at the end of the handle and attach it
to the end of the rope.
We place the springs to put the trapeze bar
with the resistance and in the place we want.
If we wish we can place the
rest of accessories with their respective hooks and springs.
We place the accessories such as the push bar and put the safety
strap.
If we wish we can place the rest of
accessories with their respective hooks and springs.
To place the Jump board, simply insert it in to the holes in the foot
platform.
We adjust the lower front wheels as much as
possible to secure it.
For a better flxatlon and security of the
Jump board we raise the foot bar until it touches the stop.
We place the foot strap on the inside of the reformer. 
We can place the convertible mat.
And, the reformer is ready to use!
Maintenance
How to clean
After each use, the upholstery should be cleaned with water and a microfiber
cloth.
For stains that could not been cleaned with water, use a small measure of
liquid or powder detergent diluted in water. Be sure to dry thoroughly.
Wheels, guides, spring control rods and bearings should be cleaned and
lubricated periodically in order to ensure their proper functioning.
Use a silicone spray for lubrication.
Be careful with over-lubrication.
Never use wet lubricants or oil.
Spring replacement
Replace the springs every two years to ensure their correct tension and
safety.
Certain environments and applications can shorten the life of your springs and
you may need to change them more frequently.
Therefore, inspect them regularly at rest for gaps and kinks between the
coils.
If you notice any damage, discontinue use and replace them immediately.
Breakage of a spring during use can cause damage and injury.
Tip: During use, make sure that the springs do not recoil in an
uncontrolled way, this will damage the springs.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>