CHESONA HB371 Detachable Magnetic Wireless Keyboard User Manual

CHESONA HB371 Detachable Magnetic Wireless Keyboard

Technical Support

If you experience any problems or questions please contact us at any time! We’ll make sure you get a response to every question and provide you with the most enjoyable shopping experience! Please feel free to buy our products, all devices are covered by a 12-month warranty.
Please contact us (not Amazon) for the best and most responsive after-sales support, by

1. Email: support@chesona.com
2. Chat: www.chesona.com

Compatibility

Compatible with iPadOS 13 (and newer). We suggest you update your device iPadOS to version 13.4.1 and newer for the best compatibility

To check your iPad system version :

1. Go to Settings >General> About> Software Version.
2. Please update your device to version 13.4.1 or newer to get proper access to the touchpad function

``

To update your iPad to the latest version. :

1. Enter your device’s Settings >General> Software Update
2. Tap “Download and Install”
   If it displays Resume Download, tap it instead

Setu pf Connection

To pair with your iPad:

1. Switch ON/OFF to ON position.
2. Press and the Bluetooth indicator starts to flash.
3. Toggle “Bluetooth On” in the “Settings” app, {The device is connected. – ON/Off Switch when the Bluetooth indicator stops blinking.)
4. Tap on “Bluetooth Keyboard” under “My Devices” in the “Bluetooth” section of the “Settings” app
   When pairing with a new device, repeat steps 1-3
   After the “Connect” indicator appears, pairing is complete

If your system is 13.3.1, please follow the steps below to enable the touchpad function:

1. Go to Settings > Accessibility > Touch
2. Make sure the Assistive Touch option is turned on

Shortcut Keys
Tip : In any application, you can view the avalable shortcuts by long- pressing the command key.When the red light Rashes, it needs to be charged, and the charging voltage only supports 5V.

Touchpad function/gesture
Note : Please confirm Bluetooth is connected and touchpad function is turned on!

Installation and Removal

1. First put the bottom of the iPad into the back cover.
2. Press the two top corners of the iPad cover, push the cover Inward, and complete the installation.

• press and finger against the camera of the Pad cover,
• Push the cover outward, and then take the iPad out to complete the removal.

Charging

1. Turn on the keyboard. (If the battery indicator is flashing, please charge the keyboard.)
2. Plug the charging cable (included) into the keyboard and power adapter (not included, recommend to use your own iPad or iPhone adapter.)
3. The indicator light turns red when the keyboard is charging
4. When charging is complete, the battery indicator turns green

Troubleshooting

If the keyboard is not working properly, please check the following:

1. The Bluetooth function of the iPad (or other Bluetooth device) is enabled.
2. Bluetooth keyboard within 33 feet.
3. Bluetooth keyboard is full charged.
4. Make sure the keyboard is turned on. (The battery indicator is on.)
5. Make sure the keyboard is paired via Bluetooth.

If you don’t need autocorrect or”·” shortcut, follow these steps:

1. Open the Settings app > General > Keyboards > Hardware keyboard.
2. Turn off Auto-Capitalization, Auto-Correction and “.” shortcut (please refer to the image below).

If Bluetooth pairing fails, please try the following steps:

1. Delete all Bluetooth devices on iPad.
2. Turn off the Bluetooth function on the iPad.
3. Reboot the iPad.
4. Turn on the Bluetooth function on the iPad.
5. Switch off the keyboard and on.
6. Repeat the steps described on pages 2 and 3 to pair the keyboard.

Product specification

• Operation distance : 10 meters (33 feet)
• Modification system : GFSK
• Working voltage : 3.0-4.2V
• working current : 1 0mA (without backlight) /180mA (backlight)
• Dormition current :<0.3mA
• Charging current : <800mA
• No backlight working hours : 70 hours
• Maintenance : Please save room temperature, and charge at normal voltage.
• Specific working hours : 3.5 hours
• Backlight dormant time : 30 seconds
• Keyboard dormant time : 10 minutes
• Work temperature: -10+55 °
• key life 3 million times
• Charging voltage :5V

Compliance

According to Part 15 of the FCC rules, the device has been tested to meet Class B digital device restrictions, which are intended to provide reasonable protection against harmful interference in residential installations. The purpose of the equipment and the radiation of RF energy, if not properly installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur during a particular installation. If the equipment does cause harmful interference to radio or television reception, it may be determined by turning the equipment off or on, the user is encouraged to attempt to correct the interference by one or more of the following measures:

• Repositioning or relocation of the receiving increases the distance between the device and the receiver-connecting the device to a different outlet in the circuit connected to the receiver.
• Requesting assistance from a distributor or an experienced radio/television technician for changes or modifications.

Not expressly approved by the party responsible for compliance that may invali­date the user’s authority to operate the device in accordance with part 15 of the FCC rules.

Operation is subject to the following two conditions:

1. The device will not cause harmful interference.
2. The device must accept any interference received, including interference that may result in unwanted operation.

support@chesona.com
www.chesona.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>