CHESONA JP377 iPad 10.2-Inch Keyboard Case User Manual
- June 5, 2024
- CHESONA
Table of Contents
CHESONA JP377 iPad 10.2-Inch Keyboard Case
Packing Included
- 1 x Detachable wireless keyboard case for iPad 10.2 Inch
- 1 x USB charging cable ( No Charger)
- 1 x User manual
Compatible for
- iPad 10.2 9th Gen 2021 (Model Number: A2602/A2603/A2604/A2605)
- iPad 10.2 8th Gen 2020 (Model Number: A2270/A2428/A2429/A2430)
- iPad 10.2 7th Gen 2019 (Model Number: A2197/A2200/A2198)
Pay attention before using
- Fully charge your keyboard, or charge it for more than 2 hours, before use it for the first time.
- If the battery power is less than 20%, the power indicator will flash continuously, you need to charge it in time to avoid problems.
No Backlight Keyboard
NOTE:
If you select input language ‘ English (US) ‘, you can type £ by
pressing ‘ Alt + 3 ‘ together.
If you select input language ‘ English (UK) ‘, you can type £ by
pressing ‘ Shift + 3 ‘ together.
Backlight Keyboard
Backlight control
Adjust the brightness three-level.
Indicator light
Capital Indicator Light
Press the keyboard Caps Lock, the indicator light is on.
Wireless Connect Indicator
Press the “Connect” button, the indicator light will flash slowly and enter BT
pairing mode. When the pairing completion light goes out.
Charging Indicator Light
Slow flashing red light means the battery is low, the charging status is
bright for a long time, and it is off after charging is completed.
Power Indicator Light
The power is turned on, and the light is off after 2-3 seconds.
First Connection
-
Slide the key to”ON” to turn on the keyboard power.
-
Press “Connect” button into Bluetooth matching condition, the Bluetooth indicator the light will flash.
-
Turn on the Bluetooth function of your tablet.
-
Search “Bluetooth 3.0 Keyboard”for matching device to keyboard.
-
Now keyboard is matched with device, the Bluetooth indicator the light will stop.
-
Use the keyboard to enter this code. After successfully connected, the Bluetooth indicator will be off.
Second Connection
When you use it for the second time.
- You only need to open your iPad Bluetooth and keyboard power, and press anykeys on your keyboard. Then it will automatically connect. ( No need to click “Bluetooth 3.0 Keyboard” and press “Connect” key)
- If it can’t connect, please click “Unpair” to delete the Bluetooth signal, restart the keyboard and iPad power, then try to pair by following the first step of using the connection.
Specifications
Working Current | ≤ 3.0 mA |
---|---|
Low Voltage Alert | 30~3.3 V |
Battery Standby Time | 120 Days |
Battery Life Time | 3 years |
Charging Port | Micro USB |
Charging Time | 2 Hours |
Awaken Time | ≤ 2 Seconds |
Working Temperature | -10°C ~ 55°C |
Working Voltage | 30 ~4.2V |
Working Time | 60 Hours |
Sleeping Current | <0.3mA |
Battery Capacity | 150 mAh |
Keyboard Lifetime | Three Million Times |
Connect Distance | ≤ 10m |
Charging Current | ≤ 200 mA |
Matching Password | Random |
Installation and Removal
- Removing back protective piece: hold iPad on both sides and use thumbs to gently push off the back cover (see photo.) Cover is held in place by two tabs.
- Proceed to “peel” cover away from iPad.
- Take iPad out.
- Take iPad out upwards.
Troubleshooting
If the keyboard is not working correctly, please check the following:
- The BT function on the iPad (or other BT devices) is enabled
- The BT keyboard is within 33 feet
- The BT keyboard is charged
If certain keys or commands begin to fail, work sporadically or lag in
response time,please restart your iPad (power on and power off).
This fixes 99% of these types of issues.
If a problem persists, please try the following steps:
- Delete all the BT devices on the iPad
- Switch off the BT function on the iPad
- Reboot the iPad
- Switch on BT on the iPad
- Switch the keyboard off and on
- Repeat steps for first Bluetooth Connection
Support
If you have problems with keyboard usage or improvement opinions, please do not hesitate to contact US. We would love to get you taken care of and happy right away! Thank you!I!