CHESONA iPad Pro 11 Detachable Magnetic Wireless Keyboard User Manual
- June 14, 2024
- CHESONA
Table of Contents
User Manual
Detachable Magnetic
Wireless Keyboard
Compatible with
iPad Pro 11
iPad Air 10.9
Technical Support
If you experience any problems or questions please contact us at any time!
We’ll make sure you get a response to every question and provide you with the
most enjoyable shopping experience! Please feel free to buy our products, all
devices are covered by a 12-month warranty.
Please contact us (not Amazon) for the best and most responsive after-sales
support, by
- Email : support@chesona.com
- Chat : www.chesona.com
Compatibility
Compatible with iPadOS 13 (and newer). We suggest you update your device iPadOS to version 13.4.1 and newer for the best compatibility
To check your iPad system version :
- Go to Settings > General > About > Software Version.
- Please update your device to version 13.4.1 or newer to get proper access to the touchpad function.
To update your iPad to the latest version :
- Enter your device’s Settings > General > Software Update
- Tap “Download and Install”
*If it displays Resume Download, tap it instead
Setup/Connection
To pair with your iPad:
- Switch ON/OFF to ON position.
- Press and the Bluetooth indicator starts to flash.
- Toggle “Bluetooth On” in the “Settings” app, (The device is connected when the Bluetooth indicator stops blinking.)
- Tap on “Bluetooth Keyboard” under “My Devices” in the “Bluetooth” section of the “Settings” app
*When pairing with a new device, repeat steps 1-3 After the “Connect” indicator appears, pairing is complete
If your system is 13.3.1, please follow the steps below to enable the touchpad function:
- Go to Settings > Accessibility > Touch
- Make sure the Assistive Touch option is turned on
Shortcut Keys
Tip: In any application, you can view the avadable shortcuts by long-pressing
the command key.When the red
light flashes, it noeds 1o be charged, and the charging voltage only supports
5V.
Command+Tab=APP switch | Fn+C = Bluetooth pairing |
---|---|
Command+A = Select all | Fn+Spacebar= Touchpad ON/OFF |
Command+C = Copy | Fn+Up/Down = Page up/down |
Command+V = Paste | Fn+Left/Ftight = Line start/end |
Command+Z= RedolUndo | = Change backlight color |
Command+X= Cut | ![CHESONA iPad Pro 11 Detachable Magnetic Wireless Keyboard - |
backiight](https://manuals.plus/wp-content/uploads/2023/11/CHESONA-iPad-Pro-11 -Detachable-Magnetic-Wireless-Keyboard-backiight.png)= Turn on/adjust backlight brightness
Touchpad function/gesture
Note: Please confim Blustooth is connected and touchpad function is tumed ont
One Finger Tap mode
Action 1: Tap one e al the main ilerface once.
Function: Mouse cursor operation.
Action 2: Tap two times and siide.
Function Select o move icon
Jumping mode: Refor 10 the correct Gescripton.
Action 3: Tap two imes when iPad is in sleeping mode.
Function: Wake up ipad.
Two Fingers Tap mode
Action &: Tap the touchpad one time.
Function: Show the shortcuts.
Two Fingers Scroll
Action 5: Sies fngers up or down.
Function: 1.5crol the webpage or fie
upidown 2. Rolling spited screen
Action 6: Sides fngers let or right.
Function: Fip the page 1o the leftor right. Two Fingers Zoom
Action 7: Sikdes two fingers 10 zooming nout
Function: Only use on the webste or sheet. Three Fingers Slide Upwards Action
8. Swipe upwards.
Function: Open the APP swicher.
Three Fingers Side Left Or Right
Action 9: Swipe lef or rignt
Function: Application window swiching.
Four Fingers Tap
Action 10. Four-ling•
tap. Function Screerkshot
Move the curser to the bottom of the screen.
Function : C4A out DOCK bar.
Move the cursor to the upper right corner.
Function open the control center
In the app page
Tap and hold the left touchpad and you can drag the app icon to Where you want it.
In edit page
Touch and Acid the Mit ttuchpad you can select me :err you want. you can drag
and drop around the text Touch and hold the right touchpad and there wll be
shoncuts for you to choose from.
Touch and hold the riht touchpad.
Display the APP menu (same as the ght mouse button),
Installation and Removal
- Fist put e botom of the Pad no the ack cover
- Press the two top comers of the iPad cover, push the cover inward and complete the installation.
- Press and hold the two upper corners of the iPad cover, then push one finger against the camera of the iPad.
- Push the cover outward, and then take the iPad out to complete the removal.
Charging
- Turn on the keyboard. (If the battery indicator is flashing, please charge the keyboard.)
- Plug the charging cable (included) into the keyboard and power adapter (not included, recommend to use your own iPad or iPhone adapter.)
a) The indicator light turns red when the keyboard is charging
b) When charging is complete, the battery indicator turns greeniPad adapters
Troubleshooting
If the keyboard is not working properly, please check the following:
- The Bluetooth function of the iPad (or other Bluetooth device) is enabled.
- Bluetooth keyboard within 33 feet.
- Bluetooth keyboard is full charged.
- Make sure the keyboard is turned on. (The battery indicator is on.)
- Make sure the keyboard is paired via bluetooth.
If you don’t need autocorrect or “.” shortcut, follow these steps:
- Open the Settings app > General > Keyboards > Hardware keyboard.
- Turn off Auto-Capitalization, Auto-Correction and “.” shortcut (please refer to the image below).
If Bluetooth pairing fails, please try the following steps:
- Delete all Bluetooth devices on iPad.
- Turn off the Bluetooth function on the iPad.
- Reboot the iPad.
- Turn on the Bluetooth function on the iPad.
- Switch off the keyboard and on.
- Repeat the steps described on page 2 and 3 to paired the keyboard.
Product specification
Operation distance : 10 meters (33 feet)
Modification system: GFSK
Working voltage 3.0-4.2V
Work current 10mA (without backlight) /180mA (backlight)
Dormation current: <0.3mA
Charging current : <800mA
No backlight working hours: 70 hours
Maintenance : Please save room temperatur echarge at normal voltage.
Specific working hours: 3.5 hours
Backlight dormant time : 30 seconds
Keyboard dormant time10 minutes
Charging time : <4.5 hours
Charging voltage : 5V
Key life: 3 million times
Work temperature : -10+55 °C
Compliance
According to Part 15 of the FCC rules, the device has been tested to meet
Class B digital device restrictions, which are intended to provide reasonable
protection against harmful interference in residential installations.
The purpose of the equipment and the radiation of RF energy, if not properly
installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur during a
particular installation. If the equipment does cause harmful interference to
radio or television reception, it may be determined by turning the equipment
off or on, the user is encouraged to attempt to correct the interference by
one or more of the following measures:
- Repositioning or relocation of the receiving antenna-increasing the distance between the device and the receiver-connecting the device to a different outlet in the circuit connected to the receiver.
- Requesting assistance from a distributor or an experienced radio/television technician for changes or modifications.
Not expressly approved by the party responsible for compliance that may invali- date the user’s authority to operate the device in accordance with part 15 of the FCC rules.
Operation is subject to the following two conditions:
- The device will not cause harmful interference.
- The device must accept any interference received, including interference that may result in unwanted operation.
support@chesona.com
www.chesona.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>