CHESONA B0CHHTRRGK Wireless Bluetooth Keyboard for Mac User Manual
- June 13, 2024
- CHESONA
Table of Contents
Wired & Bluetooth Dual Mode
Keyboard User Manual
Packing Content
1 Wireless Keyboard
1 Sillicone Keyboard Cover
1 USB-A to Type-C Charging Cable
1 User manual
Note: Please read the manual carefully before using.
Product Overview
Attention
- When not in use for a long time, we suggest to turn off the power supply to prolong the service life of the keyboard.
- Do not use liquid to clean the keyboard directly. Clean the keyboard with alcohol or similar volatile disinfectant.
Indicator Light
-
BT 1 Indicator:
Blue light will flash quickly when pairing. -
BT 2 Indicator:
Blue light will flash quickly when pairing. -
BT 3 Indicator:
Blue light will flash quickly when pairing.
NOTE: Long press key to enter pairing mode, the blue light flashes 5 times for 1 second when pairing, after 180S no pairing will enter the hibernation state, the blue light is always on when the connection is successful. -
Power Indicator:
Glow for 3s once the keyboard has been turned on. Charging Indicator: Stay in red color when charging, and it will turn green after fully charged. -
Caps lock Indicator:
Press “Caps lock” key to switch to uppercase. -
Power Switch:
Flip the power switch to the ON position.
Keys and Functions
Attention: F1/F2 are not available while using Mac mini.
Keyboard Pairing Steps
Via Wired
Step 1. Make sure the keyboard fully charged first.
Step 2. Turn ON/OFF to ON, take out the cable in the box.
Step 3. Plug the type-c end of the cable into the keyboard, and the other end
of the USB into the USB port of the computer.
Pair with 1st device
Step 1. Flip the power switch to the ON position.
Step 2. Press directly to enter 1 mode.
Long press for 5 seconds to enter pairing mode, 1 indicator will flash blue
and start to search the available BT device.
Step 3. Please click the icon in your computer’s menu bar located in upper
right corner of your screen. Make sure BT is turned to On then select “Open BT
Preferences …” in the drop down menu.
Step 4. BT window displays “ Via Bluetooth ”, please click on the “Pair button
next to it.
Step 5. Once pairing is finished, the BT keyboard shows “Connected” status.
Pair with 2nd device
Step 1. Press directly to enter 2 mode.
Long press for 5 seconds to enter pairing mode.
Step 2. Repeat the above pairing from step 3 to step 5.
Pair with 3rd device
Step 1. Press directly to enter 3 mode.
Long press for 5 seconds to enter pairing mode.
Step 2. Repeat the above pairing from step 3 to step 5.
When Mac prompts you a message, “The keyboard can not be identified…”
Please follow Keyboard Setup Assistant guide to identify keyboard as shown
below.
1.Select ANSI option, and click on Done button.
2. The status indicator will be off after successfully paired.
◄ Please note that if you are using a different Apple OSX version, your
pscreen may differ from the above diagrams.
How to switch between the connected devices:
Long press key to enter pairing mode, the blue light flashes when pairing,
the blue light is always on when the connection is successful.
Note:
1.2.3. BT Channel Indicator: to indicate which channel 1/2/3 you are in.
Charging
Step 1. Connect one end of the included type-c cable to a USB charger, and
connect the opposite end to the charging slot on the keyboard. (Note: Output:
DC 5 V / 500mA; USB charger is not included)
Step 2. The charging indicator will turn red while the keyboard is charging.
When fully charged it is green.
A full charge takes approximately 2 hours.
Sleep Mode
The keyboard will enter sleep mode if idle for 30minutes. Press any key to exit sleep mode.
Troubleshooting
If the BT keyboard fails to wake the device…
- Open apple menu
- Tap System Preferences
- Select , tap Advanced
Tick Allow BT devices to wake this device
If you can’t use the shortcut to open the launchpad…
- Open apple menu
- Tap System Preferences
- Select the keyboard, select the shortcut key, click “Launchpad and Dock”, tick “Show Launchpad”
- Custom setting shortcut keys