SmartAVI HLX-500 HDMI and IR Extender Over LAN User Guide
- June 14, 2024
- SmartAVI
Table of Contents
SmartAVI HLX-500 HDMI and IR Extender Over LAN
TECHNICAL SPECIFICATION
VIDEO
Format| HDMI 1.3 and HDCP compliant
HDTV Resolutions| 480p, 720p, 1080i, 1080p/60Hz/48bit
TV Resolution| 480i
Input Interface (TX)| HDMI Type A 19-pin Female TMDS
Output Interface (RX)| HDMI Type A 19-pin Female TMDS
Input Cable Length| Up to 40 ft
Output Cable Length| Up to 40 ft
AUDIO
Format| Dolby TrueHD, DTS-HD MA
Input Interface| HDMI (Integrated)
Output Interface| HDMI (Integrated)
IR
Signal Type| 38 KHz
Interface| 3.5 mm Jack Socket (Female)
SYSTEM
Interface| RJ-45
Cable Requirements| CAT5/5e/6
Maximum Length| 500 f
OTHER
Power| External 100-240 VAC/5VDC2A @10W
Dimensions| 2.78” W x 1.125” H x 4” D
Weight| 0.45 lbs
Approvals| UL, CE, ROHS Compliant
Operating Temp.| 32-104°F (0-40 °C)
Storage Temp.| -4-140°F (-20-60 °C)
Humidity| Up to 85% (non-condensing)
WHAT’S IN THE BOX
| PART NO. | Q-TY | DESCRIPTION |
|---|---|---|
| HLX-TX500 | 1 | HDMI over LAN or CAT5e/6 Cable Transmitter |
| HLX-RX500 | 1 | HDMI over LAN or CAT5e/6 Cable Receiver |
| Power Supply | 2 | PS5VD2A |
| Quick Start Guide | 1 |
NOTICE
The information contained in this document is subject to change without notice. SmartAVI makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for particular purpose.
SmartAVI will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material.
No part of this document may be photocopied, reproduced, or translated into another language without prior written consent from SmartAVI Technologies, Inc.
OVERVIEW
The HLX-500 HDMI Extender gives users the freedom to extend HDMI signals via
LAN, using inexpensive Cat5e/6 cables that many modern communications already
rely on.
This chainable extender can be used to generate thousands of feet of HDMI
signal extension, breaking distance barriers. Users can set up their own
extension cabling or utilize the pre-existing LAN infrastructure they have
access to. Each unit extends signals up to 500 feet. With no software or
driver required, users can easily extend HDMI signals such as HDTV, Blu-Ray,
video game consoles and more. HLX-500 supports 1080p HD video up to 1920×1080
resolution at 60Hz and is Infrared Remote enabled.
The HLX-500 is a compact unit that is easily integrated into a digital display
network at retail stores, restaurants, office spaces and many other venues.
The transmitter and receiver units are small yet sturdy, which makes inclusion
into any audio/video infrastructure quick and efficient.
The HLX-500 compresses data to utilize Cat5e/6 cables, but users will see no
degradation of signal when using one gigabit Internet connections and up. For
users utilizing pre-existing LAN connections, implementing a one gigabit
switch allows for full resolution extension. Users with smaller bandwidth will
experience compressed signals, if they so choose.
FEATURES
- Extends HDMI signal up to 500 feet via LAN (Cat5e/6 cables)
- Chainable for thousands of feet of extension
- Supports high resolution 1080p HD video, 1920×1080 at 60Hz
- Supports stereo audio
- IR (Infrared) remote enabled
- Bracket mountable
- No software or driver required
- Plug-and-Play ready
HARDWARE INSTALLATION
- Connect an HDMI cable from the HDMI source to the HLX-RX500.
- Connect the HDMI display to the HLX-RX500.
- Connect the HLX-TX500 to the HLX-RX500 with a CAT5e/6 cable.
- Power on the HLX-TX500 and the HLX-RX500.
-
HLX-TX500 FRONT
-
HLX-TX500 BACK
-
HLX-RX500 FRONT
-
HLX-RX500 BACK
BREAK DISTANCE BARRIERS TO EXTEND HDMI AND IR SIGNALS OVER IP USING CAT5E/6
CABLES
800.AVI.2131, 702.800.0005 2455 W Cheyenne Ave, Suite 112 North Las Vegas,
NV 89032
SmartAVI.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>