SMARTAVI SM-UHN-2S Advanced KVM Switch User Guide

SMARTAVI SM-UHN-2S Advanced KVM Switch

Technical Specifications

• Video Format: HDMI2.1
• Host Interface: (2) HDMI
• User Console Interface : (1) HDMI
• Max Resolution: Up to 4K (3840×2160 @60Hz)
• DDC Input Equalization : Automatic
• Input Cable Length: Up to 20 ft
• Output Cable Length: Up to 20 ft
• USB Signal Type: USB 2.0, 1.1, and 1.0 w/ internal hub
• Input Interface: ( 2) USB Type B
• Output Interface: (2) USB 1.1 Type A for KVM Devices, (2) USB 2.0 Type A Transparent
• Audio Input: (2) 3.5mm stereo audio (female)
• Audio Output: (1) 3.5mm stereo audio (female)
• Power Requirements: 12V DC, 2A power adapter with center-pin positive polarity
• Operating Temp: N/A
• Storage Temp: N/A
• Humidity: N/A

Product Usage Instructions

System Control
There are three ways to control the KVM Switch:

1. Keyboard HotKeys
2. RS-232 Serial Commands
3. Front Panel Buttons

The settings for the serial connection are as follows:

• Baud rate: 115200
• Data Bits : 8
• Parity: None
• Stop Bits: 1
• Flow Control : None

The following commands can be used:

Custom Hotkey Triggers
Users are able to customize the keys that trigger Hotkeys. The following keys are allowed: CT (Left/Right), Alt, Shift (Left/Right), Caps Lock, Scroll Lock, F1-F12

• To change HK Trigger: HK + HK + X + desired hotkey
• To view current HK Trigger: Use the RS-232 command: //??
• Default HotKey Trigger: CT (Left)

Hardware Installation

1. Ensure that power is turned off or disconnected from the unit and the computers.
2. Use HDMI cables to connect the HDMI output ports from each computer to the corresponding HDMI ports of the unit.
3. Use a USB cable (Type-A to Type-B) to connect a USB port on each computer to the respective USB ports of the unit.
4. Optionally connect a stereo audio cable (3.5mm to 3.5mm) to connect the audio output of the computers to the AUDIO IN ports of the unit.
5. Connect monitors to the HDMI console ports of the unit using HDMI cables.
6. Connect a USB keyboard and mouse in the two USB console ports.
7. Optionally connect stereo speakers to the AUDIO OUT port of the unit.
8. Finally, power on the KVM by connecting a 12VDC power supply to the power connector, and then turn on all the computers.

Note: You can connect up to 2 computers to the 2 port KVM.

FAQ

• Q: Where can I download the full manual?
  A: The full manual can be downloaded from www.ipgard.com/SM-UHN- 2S/

• Q: How many computers can I connect to the 2 port KVM?
  A: You can connect up to 2 computers to the 2 port KVM.

SM-UHN-2S
Advanced KVM Switch

SINGLE-HEAD 2-PORT HDMI KVM SWITCH WITH USB 2.0 SHARING

Quick Start Guide

A full manual can be downloaded from www.ipgard.com/SM-UHN- 2S/

WHAT’S IN THE BOX

NOTICE
The information contained in this document is subject to change without notice. iPGARD makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for a particular purpose. iPGARD will not be liable for errors contained herein, or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent from iPGARD, Inc.
20170518

TECHNICAL SPECIFICATIONS

VIDEO

Fornat| HDMI2.1
Host Interface| (2) HDMI
User Console Interface| (1) HDMI
Max Resolution| Up to 4K (3840×2160 @60Hz)
DDC| 5 volts p-p (TTL)
Input Equalization| Automatic
Input Cable Length| Up to 20 ft
Output Cable Length| Up to 20 ft
USB
Signal Type| USB 2.0, 1.1, and 1.0 w/ internal hub
Input Interface| (2) USB Type B
Output Interface|

• (2) USB 1.1 Type A for KVM Devices
• (2) USB 2.0 Type A Transparent

AUDIO
Audio Input| (2) 3.5mm stereo audio (female)
Audio Output| (1) 3.5mm stereo audio (female)
POWER
Power Requirements| 12V DC, 2A power adapter with center-pin positive polarity
ENVIRONMENT
Operating Temp| 32° to 104° F (0° to 40° C)
Storage Temp| -4° to 140° F (-20° to 60° C)
Humidity| 0-80% RH, non-condensing
CONTROL
Front Panel| Push Buttons with LED indicators
RS-232| Via Serial @ 115200 bps
Hot Keys| Via Keyboard
OTHER
Emulation| Keyboard, Mouse and Video

SYSTEM CONTROL

There are three ways to control the KVM Switch: Keyboard HotKeys, RS-232 Serial Commands, and Front Panel Buttons. The settings for the serial connection are as follows:

• Baud rate : 115200;
• Data Bits : 8;
• Parity: None;
• Stop Bits: 1;
• Flow Control: None.

The following commands can be used:

Chart Key

• [CT] = Ctrl
• = Carriage Return (Enter Key)
• [HK] = Current Hot Key Trigger

CUSTOM HOTKEY TRIGGERS

• Users are able to customize the keys that trigger Hotkeys. The following keys are allowed: CT (Left/Right), Alt, Shift (Left/Right), Caps Lock, Scroll Lock, F1-F12
• Change HK Trigger
• HK + HK + X + desired hotkey
• View Current HK Trigger
• Use the RS-232 command: //??
• Default HotKey Trigger
• CT (Left)

HARDWARE INSTALLATION

1. Ensure that power is turned off or disconnected from the unit and the computers.
2. Use HDMI cables to connect the HDMI output ports from each computer to the corresponding HDMI ports of the unit.
3. Use a USB cable (Type-A to Type-B) to connect a USB port on each computer to the respective USB ports of the unit.
4. Optionally connect a stereo audio cable (3.5mm to 3.5mm) to connect the audio output of the computers to the AUDIO IN ports of the unit.
5. Connect monitors to the HDMI console ports of the unit using HDMI cables.
6. Connect a USB keyboard and mouse in the two USB console ports.
7. Optionally connect stereo speakers to the AUDIO OUT port of the unit.
8. Finally, power on the KVM by connecting a 12VDC power supply to the power connector, and then turn on all the computers.

Note: You can connect up to 2 computers to the 2 port KVM.

• Toll Free: (888)-994-7427
• Phone: 702-800-0005
• Fax: (702)-441-5590
• WWW.iPGARD.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>