SmartAVI USB2FX USB 2.0 Extender Over Fiber User Guide
- June 14, 2024
- SmartAVI
Table of Contents
SmartAVI USB2FX USB 2.0 Extender Over Fiber User Guide
OVEVIEW
SmartAVI’s extends standard USB (Universal Serial Bus) 2.0 signals up to 10 km (6.2 miles) in Single mode and 500 ft in Multimode using a single fiber cable. The USB2FX supports all USB 2.0 high-speed devices, from keyboards to digital cameras, and will operate on Windows®, Mac® and Linux® operating systems. An integrated four-port hub allows for multiple devices to be connected to the USB2FX at once. Additional USB hubs can be added, increasing the number of devices that can be plugged into the USB2FX.
FEATURES
- Extend 0 up to 10 km in Single modeand 500 ft in Multimode
- Supports All USB 0 and 1.1 Devices Transparently (Flash Drives, Printers, Cameras, Scanners, etc.)
- Supports USB 1 Keyboard and Mouse
- Works on Windows, Mac and Linux Operating Systems
- Integrated Four-Port Hub
- How-swappable SFP module
- Power Adapter for Remote Unit Plug-and-Play
HARDWARE INSTALLATION
USB2FX-TX Transmitter
- Power off all
- Connect the KM source device (computer) to the USB2FX-TX with a USB cable using the USB-B input
- Insert an SFP transceiver into the SFP uplink port on the USB2FX-TX
- Install a fiber-optic cable into the SFP transceiver attached to the USB2FX-TX transmitter.
- Connect a power supply to the USB2FX-
USB2FX-RX Receiver
- Insert an SFP transceiver into the SFP uplink port on the USB2FX-RX
- Install the fiber-optic cable into the SFP transceiver attached to the USB2FX-RX receiver.
- Connect the USB2FX-RX to the desired peripherals using the USB-A output
- Connect a power supply to the USB2FX-
- Power on all
WHAT’S IN THE BOX
| PART NO. | Q- TY | DESCRIPTION |
|---|---|---|
| USB2FX-TX | 1 | USB 2.0 over Fiber Transmitter |
| USB2FX-RX | 1 | USB 2.0 over Fiber Receiver |
| PS5VD3A | 2 | 5V 3A Power Supply |
| Quick Start Guide | 1 |
NOTICE
The information contained in this document is subject to change without
notice. SmartAVI makes no warranty of any kind with regard to this material,
including but not limited to, implied warranties of merchantability and
fitness for particular purpose.
SmartAVI will not be liable for errors contained herein or for incidental or
consequential damages inconnection with the furnishing, performance or use of
this material.
No part of this document may be photocopied, reproduced, or translated into
another language without prior written consent from SmartAVI Technologies,
Inc.
TECHNICAL SPECIFICATION
USB
Signal Type| USB 2.0
Input Interface (TX)| (1) USB Type B (Female)
Output Interface (RX)| (4) USB Type A (Female)
OTHER
Power| External 100-240 VAC/5VDC3A
Dimensions| 4.3” W x 1.1” H x 2.5” D
Weight| 1.5 lb
Operating Temp.| 0-55 °C (32-131°F)
Storage Temp.| -20-85 °C (-4-185 °F)
Humidity| Up to 95% (non-condensing)