Aerpro APVTY15C Reverse Camera Kit Instruction Manual
- June 14, 2024
- Aerpro
Table of Contents
Aerpro APVTY15C Reverse Camera Kit
Product Information
Specifications
- Product Name: APVTY15
- Compatibility: Designed to be used with APVTY15C reverse camera kit or APVTY14 camera adapter and an NTSC camera.
- Connector Location: Behind the front left (passenger) kick trim
- No need to disassemble the vehicle’s dash for installation
- Connector Type: 26 pin connector
Product Usage Instructions
Installation
- Locate the connector behind the front left (passenger) kick trim.
- Disconnect the original 26 pin connector harness.
- Replace the existing 26 pin connector with the APVTY15 connector.
- Reconnect the original 26 pin connector to the APVTY15 patch wire connector.
Scanning QR Code for Product Information
To get more detailed information about the product, scan the QR code provided in the user manual using a QR code scanner app on your smartphone or tablet. This will direct you to the relevant product information page.
Frequently Asked Questions (FAQ)
-
Q: What is the APVTY15 harness used for?
A: The APVTY15 harness is designed to be used in conjunction with our APVTY15C reverse camera kit or with the APVTY14 camera adapter and an NTSC camera. -
Q: Where is the connector located?
A: The connector is located behind the front left (passenger) kick trim. -
Q: Do I need to disassemble the vehicle’s dash for installation?
A: No, there is no need to disassemble the vehicle’s dash for installation.
INSTRUCTION
The APVTY15 harness is designed to be used in conjunction with our APVTY15C reverse camera kit or with the APVTY14 camera adapter and an NTSC camera.
- Disconnect the original 26 pin connector harness.
- Replace the existing 26 pin connector with the APVTY15 connector.
- Reconnect the original 26 pin connector to the APVTY15 patch wire connector
- The connector located behind the front left (passenger) kick trim
- No need to disassemble the vehicle’s dash
Scan the QR code for product information
TECHNICAL ASSISTANCE
If you need assistance setting up or using your Aerpro product now or in the future, call Aerpro Support.
Australia
- TEL: 03 – 858/ 8898
- FAX: 03 – 8587 8866
- Mon-Fri 9am – 5pm AEST
Please retain this user guide for future reference.
AERPRO.COM