Aerpro APVMT12C Vehicle Specific Reverse Camera Kit Installation Guide
- June 14, 2024
- Aerpro
Table of Contents
Aerpro APVMT12C Vehicle Specific Reverse Camera Kit
Product Information
Specifications:
- Product Model: APVMT12C
- Camera System Type: CMOS NTSC
- Connector Type: 8-pin
- Compatibility: Early suits pre-2019 models, Late suits post-2019 models
Product Usage Instructions
Step 1: Disconnecting the original camera connector harnesses
- Locate the original 8-pin factory camera connector harnesses.
- Gently disconnect the original harnesses from the vehicle’s wiring system.
Step 2: Replacing the existing connector
- Take the APVMT12C 8-pin connector.
- Ensure that it matches the connector type of the original harnesses.
- Gently connect the APVMT12C 8-pin connector to the vehicle’s wiring system.
Step 3: Selecting the optional grounding pin position
Depending on your vehicle model, choose the appropriate grounding pin position:
- Option 1: Early suits pre-2019 models
- Option 2: Late suits post-2019 models
Step 4: Product Information Scan
Scan the QR code provided in the manual for additional product information.
Optional Accessories:
You may consider purchasing additional accessories for enhanced functionality or convenience. Please refer to the product manual for more information on compatible accessories.
FAQ (Frequently Asked Questions)
-
Q: Can I install this product on any vehicle?
A: No, this product is specifically designed for vehicles with factory reverse camera connectors. Please check the compatibility section in the specifications for more information. -
Q: Do I need to cut wires or drill to install this camera system?
A: No, this kit allows you to add the reverse camera system without cutting into wires or drilling. Simply follow the provided installation instructions. -
Q: Is the camera system waterproof?
A: The camera system is designed to be weather-resistant, but it is recommended to avoid direct exposure to heavy rainfall or submersion in water. -
Q: Can I use this camera system with an aftermarket flat tray?
A: Yes, this kit is specifically designed to be used when a factory ute tub has been replaced with a flat tray.
INSTRUCTION
- When a factory ute tub has been removed and replaced with flat tray onto the back you may also lose the factory reverse camera.
- This kit allows you to add a high-quality CMOS NTSC reverse camera system back into the vehicle without cutting into wires or drilling.
- Disconnect the original 8-pin factory camera connector harnesses
- Replace the existing 8 pin connector with the APVMT12C 8 pin connector
- Select the appropriate optional grounding pin position
- Early suits pre-2019 models
- Late suits post-2019 models
FEATURES
- Stealth registration plate mount reverse camera
- Plug & play vehicle-specific harness
- Connects to the OEM head unit
- 90° Horizontal lens angle
- CMOS image sensor
- Parking guidelines (optional)
- Mirror image (optional)
- PAL/ NTSC system (optional)
- IP67 Waterproof/ dustproof
INCLUSIONS
- Registration plate mount camera
- Vehicle-specific camera harness
- Product Manual
TECHNICAL ASSISTANCE
If you need assistance setting up or using your Aerpro product now or in the future, call Aerpro Support.
Australia
- TEL: 03 – 8587 8898
- FAX: 03 – 8587 8866
- Mon-Fri 9am – 5pm AEST
- Please retain this user guide for future reference.
Scan the QR code for product information
AERPRO.COM