anko 43099856 Gaming 2.1 RGB Speaker Instruction Manual

June 4, 2024
Anko

anko 43099856 Gaming 2.1 RGB Speaker

Function overview

  1. Left Satellite
  2. Volume Knob
  3. Boss Knob
  4. Right Satellite
  5. SD/MMC Cord Port
  6. USB Flash Drive Port
  7. Mode Selection
  8. CH + (FM Mode) / Next
  9. Search ond Playback
  10. CH-(FM Mode)/Previous
  11. EQ Setting Button
  12. LED Indicator
Wiring Diagram
How to use this speaker:

Mode Selection

  • The speaker enters SD/MMC cord mode by default when powered ON. Press “Mode” button to switch mode: SD/MMC cord mode – USB flash driver mode
  • FM Mode- Bluetooth Mode-3.5mm

AUX in Mode.
Note: 5-IN Mode sequences when all the ports ore plugged ln.
The speaker will detect USB flash drive first if the USB flash drive and SD/MMC odors are all plugged in.

SD/MMC card Mode

  • LED Indicator will flash when Insert SD/MMC card Into cord port. It will ploy audio track automatically.
  • Press Hi button for next track or music, press ..,. button for previous track or music; Adjust volume knob to Increase/decrease volume. Control boss level by adjusting the boss knob.
    Note: Support SD/MMC card (Not Included) up to 32G. TF or Micro SD (Not Included) shall be required with SD cord adaptor (Not Included).

USB Flash Drive Mode

  • LED indicator will flash when you insert the USB flash drive into USB port It will ploy audio track Automatically.
  • Press Mi button for next track or music, press ..,. button for previous track or music. Adjust volume
    knob to increase/decrease volume. Control boss level by adjusting boss knob.
    Note: Support USB 2.0 USB flash driver (Not Included) up to 32G.

FM Mode

  • LED Indicator light will turn on after switching to FM mode. Press and hold “SEARCH” button to search
    and save all scanned FM channels, Indicator light will flash when searching.

  • Press  button for next channel, press M4 button for previous channel. Adjust volume knob to increase/decrease volume. Control bass level by adjusting boss knob.
    Note: The strength of FM signal ls depend on the received signal level within your area. Some rural areas ore unlikely ever to be effectively covered. Week signal strength can also be caused by destructive interference of the signals from local towers in urban areas, or by the construction materials used in some buildings causing rapid attenuation of signal strength. Large buildings such as warehouses, hospitals and factories often hove no usable signal further than o few meters from the outside walls.

Bluetooth Mode

  • Press “Mode” button to switch to Bluetooth mode, LED indictor light WIFI flash Red & Blue, Indicating rt
    is ready to pair with o Bluetooth device.

  • In the Bluetooth menu on the media device, search for “KM43099856” and connect. Type Passwords “0000” or “1234” if password requested.

  • You will hear sound prompt once the Speaker Is successfully paired and connected. When playing music, the Indicator light will flash slowly.

  • Press button for next song, press NII button for previous song. Adjust volume knob to increase/decrease volume. “Control bass level by adjusting boss knob.
    AUX-in Mode

  • Use o 3.6mm ALIX’-ln cable to connect your device through audio coble. Choose the music from your music 11st from your media device and ploy.

  • Adjust volume knob to increase/decrease volume. Control boss level by adjusting boss knob.

EQ Function

  • Press EQ button to switch equalizers setting.
    Provided up to 6 different EQ “NORMAL-POP-Pl.CK-JAZZ-CLASSIC-COUNTRY”
    Note: EQ switch function works under USB Rosh Driver mode. SD/MMC cord mode and Bluetooth Mode. AUX in mode is not able to use EQ setting function.
Specifications:
  • Model No: 43099856
  • Version: Bluetooth 5.0
  • Working Distance: 10 Meters
  • Output: 15W + 5W x 2
  • Driver Size: 5″ +3″x2
  • Impedance: 4 Ohm ± 15%
  • Sensitivity: 65dB ± 3dB
  • Frequency Response: 20Hz – 20kHz
  • Powered by AC plug

12 month warranty

Thank you for your purchase from Kmart.

Kmart Austral Ltd warrants your new product to be free from defects ln materials and workmanship for the period stated above, from the date of purchase. provided that the product Is used In accordance with the accompanying recommendations or Instructions where provided. This warranty is in addition to your rights under the Australian Consumer Law.

Kmart will provide you with your choice of a refund, repair or exchange (where possible) for this product if it becomes defective within the warranty period. Kmart will bear the reasonable expense of claiming the warranty. This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse or neglect.

Please retain your receipt as proof of purchase and contact our Customer Service Centre on 1800 124125 (Austrian) or 0800 945 995 (New Zealand) or alternatively, via Customer

Help at krnart.corn.au for any difficulties with your product. Warranty claims and claims for expense incurred in returning this product can be addressed to our Customer Service

Centre at 690 Springvale Rd, Mulgrave Vic 3170.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

For New Zealand customers, this warranty ls In addition to statutory rights observed under
New Zealand legislation.

The Bluetooth° word mark and logos are registered trademarks owned by Bluetooth* SIG, Inc., and any use of such marks by KMART AUSTRALIA is under license. L516

WARNING Do not dispose of unit in fire or water. Never attempt to disassemble and reassemble. Waste electrical products should not be disposed of with household waste, please recycle where facilities exist. Check with your local authority for recycle advice. Keep your device and all accessories out of the reach of children and animas. Small parts may cause choking or serious injury if swallowed. Avoid exposing your device to very cold or very hot temperatures (below 0’C or above 45° C). > Extreme temperatures can cause deforming of the device and reduce the charging capacity and life of your device. Do not allow your device to get wet-liquids can cause serious damage. Do not handle your device with wet hands.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals