anko 43233236 Alarm Clock with Wireless Charger User Manual

anko 43233236 Alarm Clock with Wireless Charger User Manual

Warning

• This product shall not be connected to pover supply source exceeding PS2 (5V d.c.2A, 9V d2A 12V d.C2A)
• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent tupe.
• Battery cannot be subjected to high of low extreme temperatures, low air pressure at high alfitude during use, storage o transportation.
• Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flommable liquid or gas.
• Disposal of a battery into fire o a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gos.
• A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable iquid or gos.
• The marking located on the bottom of the apparatus.
• Do not expose the device to direct sunlight, heat, or flame.
• Device may become warm whie charging.
• Make sure the product has plenty of ventiation.
• Do not press the buttons too hard as it could damage the product.
•  Do not use chemicals on this product
•  Never try to repair this product yourself, take it to a certified technician. Truing to remove panels or repairing the unit yourself could lead to electric shock. When the unit is not in use, make sure itis correctly tuned off and stored in a cool dry place.
• Do not nsert foreign objects into the product,
• Avoid dropping the product, as harsh impacts could damage the product.
• Cut off the power before cleaning the clock with a soft cloth.
• Damage, shock. and/or injury can occur if these warnings are not heeded

Function Overview

Power Supply:

• Please use provided USB-C table, insert the USB end of the charging cable into the power adapter, the USB-C port into the product, and the red power indicator lights up.
• The product enters the normal working state and enters the standby state after the display lights on, the time defaut is 00:00.
• The temperature detection starts to work, and the temperature value s displayed, only display degrees Celsius (°C).
• Insert 2x AAA batteries(not included) orly for clock memory when power off. Battery s not for using to power the unit

Wireless Charging:

• Place your smart phone with wireless charging function
  o the top of the unit. The wireless charging indicator on the dispiay will light up green colour

• Indicator light display mode:

  • When using wireless charging: the green lightis always on.
  • Foreign object detection: the green light floshes.

• This unit support SW/7.5W/10W wireless charging

How To Set This Product

Power on/off function:

• Press and hold the button for more than 2 seconds to tur on/off

12/26h switch:

• Press buttons to switch 12H/24H.
  Note: I you set the 12H mode, the screen wil disploy PM n the aftemoon.

Time/Alarm clock/Date setting:

• Press and hold button to enter the time/alarm/date setting, looping, and automatically exit and save If there Is no operation within 10 seconds.

Time setting:

1. Press and hold button to enter setting, the hour begins to flash, enter the hour form.
2. Press the buttons to set the hours, or press and hold buttons o skip through the values quikly
3. Press button to enter the minutes format, the minutes begin to flash.
4. Press the buttons to set the minutes, or press and hold buttons to skip through he values quickly
   After time setting, continue to press the 1o enter alorm clock setting

Alarm clock setting:

1. to flash, enter the hour format.
2. Press the buttons to set the hours, or press and hold @/@ buttons to skip through the values quickly
3. Press the button to enter the mintes forma, the minutes begin to flash.
4. Press the buttons to set the minutes, or press and hold buttons o skip thiough the values. quickly After alarm clock setting, continue to press the to enter date setting

Date setting:

1. . After entering date setting, the Yeor number floshes,  press the buttons to increase or decrease the value, or press and hold   buttons to skip through the values quickly
2. Press the @ bution to enter the Month format, the Month begins to lash.
3. Press the buttons to increase or decrease the value, or press and hold buttons to skip through the values quickly,
4. Press button to enter the Day format, the Day begins to flash. 5. Press the buttons to increase or decrease the value, or press and hold buttons to skip through the volues quickly,
   Note: It will automatically exit and save if there is no. ‘operation within 10 seconds.

Alarm clock function:

• Press and hold button for more than 2 seconds to tum on and off the alarm clock function.
• Alarm sound rings (beep sound) for 25 seconds, stops for 10 seconds, then rings for 25 seconds; it will automatically turn off after a total of 2 rounds.
• When the alarm clock rings, the alam indicator light also flashes at the same time, press any buttons to turn off the rings.

Light functions:

• press button o tum on the ombient ight and adjust the brighness, 3 evels brightness control: 100%-75%-25%.
  Note: The default brightness is 100%

Specification

• Input: 5V.2A/9V.2A/12V.2A
• Wireless Charger Output: 5WW/75W/10W
• Battery: 2 x AAA batteries (not included)
• Wireless Charging Transmission Distance: <5mm

12 month warranty
Thank you for your purchase from Kmart
Kmart Australia Ltd warrants your new product to be free from defects in materiols and workmanship for the period stated above, from the date of purchose, provided that the product is used in accordance with the accompanying recommendations or instructions where provided. This warranty is in addition to your rights under the Australion Consumer Law. Kmort will provide you with your choice of a refund, repair or exchange (where possible) for this product if it becomes defective within the warranty period. Kmart will bear the reasonable expense of claiming the warranty. This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse or neglect. Please retain your receipt s proof of purchase and contact our Customer Service Centre on 1800 124 125 (Australia) or 0800 945 995 (New Zealand) or alteratively, via Customer Help ot kmart.com.au for any difficulties with your product. Warranty claims ond claims for expense incurred in returning this product can be addressed to our Customer Service Centre at 690 Springvale Rd, Mulgrave Vic 3170. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You ore entitled to replacement or refund for a mojor failure and  compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. For New Zealand customers, this warranty is in addition to statutory rights observed under New Zealond legislation

WARNING
Do not dispose of unit in fire or water. » Never ottempt to disassemble and reassemble. Waste electrical products should not be disposed of with household waste, pleose recycle where fociliies exist. Check with your local authority for recycle advice. > Keep your device and all accessories out of reach of children and animals. Small parts may cause choking or serious injury if swallowed. > Avoid exposing your device to very cold or very hot temperatures (below 0°C or above 40°C). » Extreme temperatures can cause deforming of the device and reduce the charging copacity and life of your device. > Do not allow your device o get wet, liquids can couse serious damage. Do not handle your device with wet honds.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>