GROTHE ETA S 100/200 Surface Mounted Doorbell Instruction Manual
- June 4, 2024
- GROTHE
Table of Contents
ETA S 100/200
KLINGELTASTER
Installation Instructions
ETA S 100/200 Surface Mounted Doorbell
PUSH BUTTON
| |
---|---|---
Positions of wire (at the side!)| Wall fixation of the bracket| Insert wires
into the gasket
| |
Connection of push! See 3a)| a) Wiring
b) Unlocking| Fixation of the gasket on push
| |
Fixation of the push-on bracket| Fixation of the screw (at the bottom)| Stow
opening tool separately because of corrosion possibility!
General
Please note that installation and assembly of electrical equipment should only
be undertaken by a qualified electrician!
Nationally specific regulations on electrical installation work must be
observed
Before starting installation ensure that the circuit is isolated from the
supply by withdrawing the circuit fuse or circuit breaker!
Techn. Dat.
- max. 24V=/~ (AC/DC) / 1,5A
- Nur für Schutzkleinspannung!
- Protective low voltage only!
- Wire rigid 0,6-0,8mm
- Wire flex.: Erst entriegeln (1.b)/ unlocking first (1.b)
- -20°C…60°C / IP 44
Grothe GmbH
*Löhestraße 22 D-53773 Hennef
Telefon: (0 22 42) 88 90-0
Telefax: (0 22 42) 88 90-36
E-mail: [email protected]
Internet:www.grothe.de
MV01460107/12**
Documents / Resources
|
GROTHE ETA S 100/200 Surface Mounted
Doorbell
[pdf] Instruction Manual
ETA S 100 200 Surface Mounted Doorbell, ETA S 100 200, Surface Mounted
Doorbell, ETA S 100 Surface Mounted Doorbell, ETA S 200 Surface Mounted
Doorbell, Doorbell
---|---