TAKSTAR DA10 Speech Microphone User Manual
- June 14, 2024
- TAKSTAR
Table of Contents
TAKSTAR DA10 Speech Microphone
Product Information
Specifications
- Frequency Response : 100Hz-15kHz
- Max Power of Sound : 8W
- Speaker Impedance : 4
- THD : THD5% 1KHz@4R,4W
- S/N Ratio : 66dB (A-Weighted)@1W 4 (speech mode)
- Bluetooth Version : 5.0
- Reverb : Reverb
- Operating Voltage : 3.4V-4.2V
- Battery Type : Li-ion battery (18650)
- Battery Capacity : 3.7V/2000mAh
- Charging : DC5V 1.5A
- Charging Time : approx. 3h
- Operation Time : approx. 8h (speech)
- Net Weight : approx. 220g
- Dimension : 64mm235mm (DiaH)
Product Usage Instructions
Functionality
The TAKSTAR DA10 speech microphone is a versatile device that combines a
microphone, power amplifier, and speaker in one. It is suitable for various
applications such as speech, publicity, and karaoke.
Features
- Rare earth material speaker for excellent sound quality and high volume output (peak power of 8W)
- One-button switch between MC mode and KTV mode for easy operation
- Wireless playing function eliminates the need for cable connections, making it more convenient to play music
- Volume adjusting function to adjust the volume based on the venue
- Built-in DSP chip with feedback rejecting function to effectively reject feedback
- Ultra-long standby mode automatically turns off after 15 minutes of no signal input to save power consumption
- High capacity Lithium battery for energy saving and environmental protection, providing approximately 8 hours of operation time
- Compact design that is comfortable to hold, suitable for long-term reinforcement and karaoke
Application
The TAKSTAR DA10 speech microphone is suitable for various applications
including speech, publicity, karaoke, etc.
Product Content
- DA10 speech microphone – 1pc
- Windscreen – 1pc
- Type-C charging cable – 1pc
- User manual – 1pc
FAQ
- Q: How do I turn on/off the amplifier?
- A: Press and hold the power button for 2 seconds to turn on or off the amplifier. If the device is not used for 15 minutes, it will automatically power off.
- Q: How do I switch between different modes?
- A: Click the M button to cycle through 4 modes – speech mode, host mode, karaoke mode, and Bluetooth mode. Each mode is accompanied by a corresponding voice prompt.
- Q: What does the indicator light indicate?
- A: The indicator light will light up green during operation if there is sufficient power supply. If the power can last for less than 1 hour, it will light up red. It will flash red when charging, and stay green when fully charged.
DA 10 Speech Microphone
Product
Dear Customer,
Thank you for purchasing TAKSTAR DA10 speech microphone. Please read the user
manual carefully before operation and keep it for reference in future. If you
have any questions or suggestions, please contact our local dealer.
Features
- Combining microphone, power amplifier and speaker together, suitable for speech, publicity, karaoke
- Rare earth material speaker, light weight, excellent sound, high volume, peak power 8W
- One button to switch between MC mode and KTV mode, easy operation
- Wireless playing function without the trouble of cable connection, more convenient to play music
- Volume adjusting function to adjust the volume based on the venue
- Built-in DSP chip with the feedback rejecting function to reject feedback effectively
- Ultra-long standby, turning off automatically after no signal input for 15 minutes to save the power consumption
- High capacity Lithium battery for energy saving and environmental protection, approximately 8h operation time Compact design, comfortable to hold, suitable for reinforcement and karaoke for a long time
Application
Speech, publicity, karaoke, etc
Product content
- DA 10 speech microphone………………………………………1 pc
- Windscreen………………………………………………………1pc
- Type-C charging cable…………………………………………1pc
- User manual………………………………………………………1 pc
Specification
- Frequency Response: 100Hz-15kHz
- Max Power of Sound : 8W
- Speaker Impedance : 4Ω
- THD : THD≤5% 1KHz@4R,4W
- S/N Ratio : 66dB (A-Weighted)@1W 4Ω (speech mode)
- Bluetooth Version: 5.0
- Reverb : Reverb
- Operating Voltage: 3.4V-4.2V
- Battery Type: Li-ion battery (18650)
- Battery Capacity: 3.7V/2000mAh
- Charging: DC5V 1.5A
- Charging Time : approx. 3h
- Operation Time : approx. 8h (speech)
- Net Weight : approx. 220g
- Dimension : Φ64mm235mm (DiaH)
Cartridge Specification
- Cartridge : back electret
- Polar Pattern : unidirectional
- Frequency Response : 150Hz-16KHz
- Sensitivity: -47.5±1.5dB(0dB=1V/Pa,at 1KHz)
Note : The data is tested by Takstar Laboratory and Takstar has the final interpretation right!
Function
- Power button : Keep pressing it for 2 seconds to turn on or off the amplifier. If it is not used for 15 minutes, it will automatically power off.
- “M” button : Click it to cycle through 4 modes (i.e., speech mode, host mode, karaoke mode, Bluetooth mode), accompanied by corresponding voice prompt.
- Indicator light: If it keeps lighting up green during operation, this means sufficient power supply. If the power can last for less than 1h, it keeps lighting up red. It flashes red when charged. If it keeps lighting up green, this means it is fully charged.
- “+” button: Click it to increase the volume of the amplifier. A total of 3 levels of volume can be chosen.
- “-” button: Click it to decrease the volume of the amplifier. It can only be minimized to about 60% of the total volume. There is no mute function.
- Cartridge: When speaking, the mouth should be as close as possible to the pickup, generally 3-5 cm. Do not cover the cartridge with your hands; otherwise it will easily produce feedback.
- Charging interface: Connect to the Type-C charging cable. Please use a charging head with a specification of 5V 1.5A and 3C certification to charge the amplifier.
- Speaker: Do not put the speaker too close to people’s ears to avoid hearing damaging. Please try to keep the speaker clean.
Note: When the product is used for the first time, it is recommended to fully charge it first; when it is fully charged, please stop charging the battery to avoid overcharge; if it is not used for a long time, it needs to be charged once every six months to avoid over discharge of the battery, which will affect the battery performance.
Wireless pairing method
Upon first use, you need to connect to your phone or a wireless device,
following below steps
- Power up the mic and press “M” button to switch to Bluetooth mode.
- Enter SETTINGS menu on your phone, find and enable Bluetooth, wait until “TAKSTAR DA10” is discovered and tap on it to connect. If connected successfully, you should be able to play audio wirelessly through the mic.
- Next time you switch to Bluetooth mode, it will automatically pair to the previously connected device. Switching to other mode will disable wireless connection automatically.
Caution
In order to avoid possible personal injury or property damage caused by
electric shock, high temperature, fire, radiation, explosion, mechanical
hazards and improper use, please read and observe the following items
carefully before using the product.
- Please do not put the speaker close to people’s ears to avoid hearing damage.
- If there is any abnormality (such as smoke, odor, etc.) during use, please turn off the power switch and unplug the power plug immediately, and then send the product to the dealer for maintenance.
- The product and accessories should be placed indoors in a dry and ventilated place. Do not store them in a humid and dusty environment for a long time. Avoid getting close to fire, rain, water, excessive collision, throwing, vibrating the machine and covering the ventilation holes during use, so as not to damage its function.
- When using the product, you must abide by the relevant safety regulations. Please do not use the product in the occasions that are clearly prohibited by laws and regulations to avoid accidents.
- Please do not disassemble, refit or repair the product by yourself to prevent personal injury. If you have any questions or service needs, please contact our local dealer for follow-up.
- If you use a power adapter to supply power, you should purchase and use a power adapter that has obtained CCC certification and meets the standard requirements.
Label Meanings
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Changes or modifications not expressly approved by the complying party may cause the user to lose permission to operate the device.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
- FCC ID :WRADA10
About This Manual
This manual contains up-to-date technical specifications as of printing.
However, specifications contained herein may not conform to your particular
product since Takstar is constantly improving its products. Also,
specifications, devices or accessories available may vary from region to
region. If you have any questions, please contact our local sales outlet. For
the latest version/more information, please visit our website:
https://www.takstar.com/
Scan for more product information
Guangdong Takstar Electronic Co., Ltd. Address: No. 2 Fu Kang YiRd., Longxi Boluo Huizhou, Guangdong 516121 China
- Tel : 86 752 6383644 Fax: 86 752 6383952
- Email: sales@takstar.com
- Website: www.takstar.com
- CMIIT ID : 2021DP2396 Made in China